Sunburst Chart
This chart type belongs to PowerCharts XT
A Sunburst chart is used to visualize relationships within hierarchical data. It shows hierarchy through a series of concentric rings, where each ring corresponds to a level in the hierarchy. Each ring can have multiple segments; each segment showing the contribution of a particular dimension in that hierarchy. Focussing on a segment in the ring gives a sense of the part to the whole relationship of this dimension with respect to its parent ring segment.
The Sunburst chart is most effective at showing how one ring is broken into its contributing pieces (i.e, sequential segments). It is a space-filling visualization that uses a radial, rather than a rectangular layout (like a Treemap).
A Sunburst chart shares similarities with a Ring Chart, Multi-level Pie Chart, Belt Chart, and a Radial Treemap.
To create a sunburst chart follow the steps given below:
In the JSON data, set the attributes and their corresponding values in
"<attributeName>": "<value>"format.Specify the chart type using the
typeattribute. To render a sunburst chart, setsunburst.Set the container object using
renderAtattribute.Specify the dimension of the chart using
widthandheightattributes.Set the type of data (JSON/XML) you want to pass to the chart object using
dataFormatattribute.
For a detailed list of attributes, refer to the chart attributes page of sunburst chart.
To render a sunburst chart specify the values of all the leaf nodes. If any of the leaf node value is not specified, the chart will show No Data to Display Message.
A Sunburst chart looks as follows:
Click here to edit this chart.
In the above chart, you can see how different segments of the chart representing different sections of data and colored accordingly.
Important Concepts Related to Sunburst Chart
Visualizing Hierarchy in Data
A Sunburst diagram can display a near-infinite number of levels of data hierarchy. Note that if there is only one level of hierarchy in data, the chart would become a doughnut chart. Levels are represented by concentric rings, with the top level of the hierarchy at the center and deeper levels radiating farther away.
The individual segment in each level of the hierarchy is referred to as a node. Any ring segment without a child node is a leaf node. Any node without a parent node is a root node.
Understanding Part-to-Whole Relationship
Each child node in a Sunburst diagram represents a part of the value of its parent node. By summing the value of all the children node, you get the value of the parent node (ring segment). The sweep of each ring segment is proportional to its value.
Sweep Angle of Segments
The sweep angle of each segment in a ring encodes the data value of each contributing member. The larger the total value of a segment, the greater the sweep angle covered by it.
Colors of Categories
Each node (other than the root nodes) inherits the color of its parent node. This helps you identify parent-child and sibling relationships within the data.
Drill Down
By default, the sunburst chart supports drill down, i.e, when you click on a node, it is displayed along with its child nodes to highlight the relationship between them. This happens for any node except the root nodes on the first and the leaf nodes on the last ring. If you click on the parent node again, the chart reverts to the original state.
Assigning Values to Nodes
In a Sunburst chart, leaf nodes are displayed only when you mention their values. The value of a parent node must be equal to, or greater than the sum of values assigned to its child nodes. By default, the sum of the values of all child nodes is assigned to the parent node.
Rotated Labels
Sunburst displays rotated labels. The angle of rotation of each label depends on the start angle and end angle of the ring that the node is associated with.
Configurations of Sunburst Chart
Enable/Disable Drill Down
By default, when you click on a node (except the root nodes on the first and the leaf nodes on the last ring), the chart drills down, i.e., displays a subset of data consisting of that node and its child nodes. To disable this feature, set the value of the allowDrillToNode attribute to 0.
Use the code given below:
{
"chart": {
"allowDrillToNode": "0"
}
}The chart will look as shown below:
Click here to edit this chart.
Specify Value of Inner Radius
When a root has only one parent node, the value of innerRadius is set to 0 by default. However, if a root has multiple parent nodes, then a default value of 30 pixels is assigned to innerRadius.
Use the code given below:
{
"chart": {
"innerRadius": "40"
}
}The chart will look as shown below:
Click here to edit this chart.
Set Center Angle
Imagine a line bisecting the Sunburst Diagram. The angle that line makes with the origin (0,0) is the center angle for the Sunburst. You can specify the center angle of the Sunburst Diagram using the attribute centerAngle.
Use the code given below:
{
"chart": {
"centerAngle": "90"
}
}The chart will look as shown below:
Click here to edit this chart.
In the above chart, you can see that the value of centerAngle is set to 90.
Set Total Angle
You can restrict the total angle covered by a Sunburst diagram using the totalAngle attribute. When you set its value, the available angle is distributed among the categories in the data. Each category is assigned a percentage of the total space proportional to its value.
The totalAngle attribute directly controls how the Sunburst diagram looks. For instance, if you set its value to 180, you will get a half Sunburst.
Use the code given below:
{
"chart": {
"totalAngle": "180"
}
}The chart will look as shown below:
Click here to edit this chart.
In the above chart, the value of totalAngle is set to 180, resulting in a half Sunburst.
Set Fill Color
You can specify the color of the nodes. To do so, set the value of the paletteColors attribute to the hexadecimal code of the desired color. Note that if you do not specify any color, the nodes are colored as follows:
Each node in the first level of the hierarchy has different colors from the default palette. If there is only one root node, coloring logic is applied from the level after the one with the root node. For more than one root node, the coloring logic is applied from the root level.
Subsequent child nodes inherit the colors of their parent nodes.
Use the code given below:
{
"chart": {
"paletteColors": "ffffff, A88CCC, 77ECC8, 97FAA4, CFF69D, EED482, FFAE91, FE93B5, D98ACF, 7BCDE8, 94A8E9",
}
}The chart will look as shown below:
Click here to edit this chart.
Configure Hover Effects
You can configure several hover effects that occur when you hover over a node. These effects are applied to the node hovered over, as well as its parent nodes.
Set the value of the attribute
hoverFillColorattribute to the hexadecimal value of the desired color of the nodes. By default, the value ofhoverFillColoris set to the color of the segment the hovered node belongs to.Set the value of the
hoverFillAlpha(between0for transparent and100for opaque) to set the transparency of the hovered node and its parent nodes.Set the value of the
unfocussedAlphaattribute (between0for transparent and100for opaque) to set the transparency of the nodes other than the hovered node.
Use the code given below:
{
"chart": {
"hoverFillColor": "#FF0000",
"hoverFillAlpha": "50",
"unfocussedAlpha": "50"
}
}The chart will look as shown below:
Click here to edit this chart.
Configure Highlight Effects
The Sunburst chart supports several highlight effects, which are activated when you move the mouse pointer over relevant elements in the chart.
Highlight Parent Segments
In a sunburst chart, parent nodes (all the way to the root node) are highlighted when you hover the pointer over a child node. This is controlled by the attribute highlightParentPieSlices, whose value is set to 1 by default.
Use the code given below:
{
"chart": {
"highlightParentPieSlices": "0"
}
}The chart will look as shown below:
Click here to edit this chart.
Set Transparency of Unrelated Nodes
When you hover the pointer over a node, all nodes (except the hovered node and its parent nodes) turn transparent. This behavior is controlled by the attribute unfocussedAlpha, whose value is set to 0 by default. To instead keep every node visible across the chart, set the value of unfocussedAlpha to 100.
Use the code given below:
{
"chart": {
"unfocussedAlpha": "70"
}
}The chart will look as shown below:
Click here to edit this chart.
Set Transparency of Hovered Node
When you hover over a node, it becomes opaque. This behavior is controlled by the hoverFillAlpha attribute, whose value is set to 100 by default. To instead turn the node transparent, set the value of hoverFillAlpha to 0.
Use the code given below:
{
"chart": {
"hoverFillAlpha": "20"
}
}The chart will look as shown below:
Click here to edit this chart.
Configure Fill Color of Hovered Node
By default, a hovered node retains its color when hovered. This is controlled by the hoverFillColor attribute, which inherits the value of the fillColor attribute. To change this behavior, and set a neutral color (for instance, red) for a hovered node, set the value of hoverFillColor to the hexadecimal code of the desired color.
Use the code given below:
{
"chart": {
"hoverFillColor": "#FF0000"
}
}The chart will look as shown below:
Click here to edit this chart.
Increase Chart Label Visibility
Use the attribute textOutline to add an outline to the data labels in a Sunburst chart.
Refer to the following code:
{
"chart": {
"textOutline": "1"
}
}The chart will look as shown below:
Click here to edit this chart.