Chart Attributes

FusionCharts XT uses the concept of Color Palettes. Each chart has 5 pre-defined color palettes which you can choose from. Each palette renders the chart in a different color theme.

While the palette attribute allows to select a palette theme that applies to chart background, canvas, font and tool-tips, it does not change the colors of data items (i.e., column, line, pie etc.). Using paletteColors attribute, you can specify your custom list of hex colors for the data items. The list of colors have to be separated by comma e.g., "paletteColors": "#FF0000, #0372AB, #FF5904...". The chart will cycle through the list of specified colors and then render the data plot accordingly. To use the same set of colors throughout all your charts in a web application, you can store the list of palette colors in your application globally and then provide the same in each chart JSON.

This attribute lets you control whether empty data sets in your data will be connected to each other OR do they appear as broken data sets.

In Zoomline charts, to display the data at the initial level, data are compressed. Initial level fails to display the first and last data from the data set provided. This attribute if set to 1, displays the first and last valid data even if the value arises between the broken data set.

It sets the configuration whether the x-axis labels will be displayed or not.

This attribute can be used to set the maximum height for the x-axis labels (data labels) excluding the x-axis title. If any label goes beyond this height, the label will be truncated. In stagger mode, the number of stagger lines will be reduced if they exceed this value.

Sets the distance between the labels of the x-axis.

When enabled in auto mode, long data labels are truncated by adding ellipses to prevent them from overflowing the chart background. The default value is 1.

This attribute lets you set whether the data labels will show up as rotated labels on the chart.

Whether to apply the shadow effects for data plot.

This attribute lets you set whether the y-axis lower limit will be 0 (in case of all positive values on chart) or should the y-axis lower limit adapt itself to a different figure based on values provided to the chart.

Indicates whether the XML is in compact form or not.

Specifies the separation character used in compact XML.

Used for enabling/disabling the pin mode feature, which is active by default.

Specifies the number of data labels that are to be visible in one screen. As this attribute imposes the equispace constraint, values greater than 5 and less than 10 (if total data plots = 10) will not be applicable due to violation of this constraint.

Indicates the index of the data label that will appear to the extreme left of the chart.

Indicates the index of the data label that is to appear at the extreme right of the chart. Using displayStartIndex and displayEndIndex attributes you can set the range of data labels that'll be visible when the chart first renders.

Specifies the number of pixels to be used for producing a data point. A greater number will result in high quality display.

This attribute, when set to 1, indicates to the chart that the text (rendered on the chart) may contain RTL characters and the textual display has to be managed accordingly.

This attribute lets you enable/disable the highlight effect, in the form of a fadeout, for the data plots corresponding to a legend item. When this attribute is enabled and the mouse pointer is hovered over a legend item label, plots belonging to the other data series fadeout, by reducing their opacity.

The fadeout effect can be customized by specifying the fadeout color and opacity using the color and alpha attributes. Eg. fadeout|color=#ff0000, alpha=60

Whether to show "Print Chart" item in the context menu of the chart? Even if you opt to hide the item in context menu, you can still opt to invoke print() JavaScript method of the chart to print the same.

This attribute changes the theme of the chart. There are 4 types of themes which have been made according to the different color combinations.

This attribute allows to set a custom font for all chart messages.

This attribute allows to set a custom font size for all chart messages.

This attribute allows to set a custom font color for all chart messages.

This attribute allows to set a custom horizontal alignment for all images displayed as chart messages.

Default value: middle

This attribute allows to set a custom vertical alignment for all images displayed as chart messages.

Default value: middle

This attribute allows to set a transparency for all images displayed as chart messages.

Default value: 100

This attribute allows to set a scale for magnifying all images displayed as chart messages.

Default value: 100

This attribute allows to set the message to be displayed when a chart begins to load. To display an image as the chart message, prefix I- to the image URL.

This attribute allows to set the font for the message displayed when a chart begins to load.

This attribute allows to set the font size for the message displayed when a chart begins to load.

This attribute allows to set the font color for the message displayed when a chart begins to load.

If an image is displayed as the chart loadMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

If an image is displayed as the chart loadMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

If an image is displayed as the chart loadMessage, this attribute allows to set the transparency of the image.

Default value: 100

If an image is displayed as the chart loadMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

This attribute allows to set the message to be displayed when the specified chart type is not supported. To display an image as the chart message, prefix I- to the image URL.

This attribute allows to set the font for the message displayed when the specified chart type is not supported.

This attribute allows to set the font size for the message displayed when the specified chart type is not supported.

This attribute allows to set the font color for the message displayed when the specified chart type is not supported.

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set the transparency of the image.

Default value: 100

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

This attribute allows to set the message to be displayed if an error is encountered while rendering the chart. To display an image as the chart message, prefix I- to the image URL.

This attribute allows to set a font for the message displayed if an error is encountered while rendering the chart.

This attribute allows to set the font size for the message displayed if an error is encountered while rendering the chart.

This attribute allows to set the font color for the message displayed if an error is encountered while rendering the chart.

If an image is displayed as the chart renderErrorMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

If an image is displayed as the chart renderErrorMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

If an image is displayed as the chart renderErrorMessage, this attribute allows to set the transparency of the image.

Default value: 100

If an image is displayed as the chart renderErrorMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

This attribute allows to set the message to be displayed when chart data begins loading. To display an image as the chart message, prefix I- to the image URL.

This attribute allows to set a font for the message displayed when chart data begins loading.

This attribute allows to set the font size for the message displayed when chart data begins loading.

This attribute allows to set the font color for the message displayed when chart data begins loading.

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set the transparency of the image.

Default value: 100

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

This attribute allows to set the message to be displayed if the data loaded for a chart is empty. To display an image as the chart message, prefix I- to the image URL.

This attribute allows to set the font for the message displayed if the data loaded for a chart is empty

This attribute allows to set the font size for the message displayed if the data loaded for a chart is empty.

This attribute allows to set the font color for the message displayed if the data loaded for a chart is empty.

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set the transparency of the image.

Default value: 100

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

This attribute allows to set the message to be displayed if an error is encountered while loading chart data. To display an image as the chart message, prefix I- to the image URL.

This attribute allows to set a font for the message displayed if an error is encountered while loading chart data.

This attribute allows to set the font size for the message displayed if an error is encountered while loading chart data.

This attribute allows to set the font color for the message displayed if an error is encountered while loading chart data.

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set the transparency of the image.

Default value: 100

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

This attribute allows to set the message to be displayed if the data to be loaded for the chart is invalid. To display an image as the chart message, prefix I- to the image URL.

This attribute allows to set the font for the message displayed if the specified chart data is invalid.

This attribute allows to set the font size for the message displayed if the specified chart data is invalid.

This attribute allows to set the font color for the message displayed if the specified chart data is invalid.

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set the transparency of the image.

Default value: 100

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Caption of the chart.

Sub-caption of the chart.

X-axis title of the chart.

Y-axis title of the chart.

Sets horizontal alignment of caption

Whether caption should be on top of the data plot area

Sets the caption font size in pixels

Sets the sub-caption font size (in pixels)

Sets the caption font family

Sets the sub-caption font family

Sets the caption font color

Sets the sub-caption font color

Whether the caption font should be displayed in bold

Whether the sub caption font should be displayed in bold

Whether the caption is aligned with the canvas. Else, it will be aligned with the entire chart area

If caption is not centre aligned, lets you configure the padding (in pixels) from either edge. Will be ignored if caption is centre aligned.

This attribute if set to _0_, hides the x-axis of the chart.

Default value: 1

Sets color of the x-axis of the chart.

Sets the thickness of the x-axis line of the chart.

This attribute if set to _0_, hides the y-axis of the chart.

Default value: 1

Sets color of the y-axis of the chart.

Sets the thickness of the y-axis line of the chart.

FusionCharts XT y-axis is divided into vertical sections using div (divisional) lines. Each div line assumes a value based on its position. Using this attribute you can set whether to show those div line (y-axis) values or not. This attribute shows or hides the y-axis divisional lines and limits. The values of showLimits and showDivLineValues, if specified explicitly, overrides the value of this attribute.

By default, all div lines show their values. However, you can opt to display every x(th) div line value using this attribute.

If you do not wish to rotate y-axis name, set this as 0. It specifically comes to use when you have special characters (UTF8) in your y-axis name that do not show up in rotated mode.

If you opt to not rotate y-axis name, you can choose a maximum width that will be applied to y-axis name.

This attribute helps you explicitly set the lower limit of the chart. If you don't specify this value, it is automatically calculated by the chart based on the data provided by you.

This attribute helps you explicitly set the upper limit of the chart. If you don't specify this value, it is automatically calculated by the chart based on the data provided by you.

Whether to forcefully attach decimal places to all y-axis values. For example, If you limit the maximum number of decimal digits to 2, a number like 55.345 will be rounded to 55.34. This does not mean that all y-axis numbers will be displayed with a fixed number of decimal places. For instance 55 will not be displayed as 55.00 and 55.1 will not become 55.10. In order to have fixed number of decimal places attached to all y-axis numbers, set this attribute to 1.

If you've opted to not adjust div lines, you can specify the div line values decimal precision using this attribute.

Sets the x-axis font family for the text

Sets the x-axis font color

Specifies the x-axis font size

Whether x-axis font should be bold

Whether x-axis font should be italicized

Sets the background color for x-axis text

Sets the border around the x-axis text

Sets the x-axis alpha including font and background

Sets the x-axis font alpha

Sets the x-axis background alpha

Sets the x-axis border alpha

Sets the x-axis border padding

Sets the x-axis border radius

Sets the x-axis border thickness

Whether the border around the x-axis name should be rendered using dashed lines.

Default value: 0 (border rendered using straight lines)

Sets the length of each dash when the border around the x-axis name is rendered using dashed lines.

Sets the gap between consecutive dashes when the border around the x-axis name is rendered using dashed lines.

Sets the y-axis (primary / secondary) font family for the text

Sets the y-axis (primary / secondary) font color

Specifies the y-axis (primary / secondary) font size

Whether y-axis (primary / secondary) font should be bold

Whether y-axis (primary / secondary) font should be italicized

Sets the background color for y-axis (primary / secondary) text

Sets the border around the y-axis (primary / secondary) text

Sets the y-axis (primary / secondary) alpha including font and background

Sets the y-axis (primary / secondary) font alpha

Sets the y-axis (primary / secondary) background alpha

Sets the y-axis (primary / secondary) border alpha

Sets the y-axis (primary / secondary) border padding

Sets the y-axis (primary / secondary) border radius

Sets the y-axis (primary / secondary) border thickness

Whether the border around the y-axis name should be rendered using dashed lines.

Default value: 0 (border rendered using straight lines)

Sets the length of each dash when the border around the y-axis name is rendered using dashed lines.

Sets the gap between two consecutive dashes when the border around the y-axis name is rendered using dashed lines.

Whether to show a border around the chart or not.

Border color of the chart.

Border thickness of the chart.

Border alpha of the chart.

This attribute sets the background color for the chart. You can set any hex color code as the value of this attribute. To specify a gradient as background color, separate the hex color codes of each color in the gradient using comma. Example: #FF5904, #FFFFFF.

Sets the alpha (transparency) for the background. If you've opted for gradient background, you need to set a list of alpha(s) separated by comma.

If you've opted for a gradient background, this attribute lets you set the ratio of each color constituent.

Sets the angle of the background color, in case of a gradient.

To place any image (JPG/PNG/GIF) as background of the chart, enter the (path and) name of the background image. It should be in the same domain as the chart.

This attribute specifies the opacity for the loaded background image.

Helps you specify the mode in which the background image is to be displayed. Stretch - expands the image to fit the entire chart area, without maintaining original image constraints. Tile - the image is repeated as a pattern on the entire chart area. Fit - fits the image proportionately on the chart area. Fill -proportionately fills the entire chart area with the image. Center - the image is positioned at the center of the chart area. None - Default mode.

Helps you to vertically align the background image.

Helps you to horizontally align the background image.

Helps you magnify the background image.This attribute will only work when the attribute bgImageDisplayMode is set to none, center, or tile.

This attribute sets the background color for the chart canvas. You can set any hex color code as the value of this attribute. To specify a gradient as canvas background color, separate the hex color codes of each color in the gradient using comma. Example: #FF5904, #FFFFFF.

This attribute sets the background transparency for the chart canvas. For gradient, separate the alpha value using comma. Example: 15, 50.

When a gradient is used to set the color of the canvas background, this attribute sets the ratio of the colors. Example : If the value of the canvasBgColor attribute is set as #FF5904, #FFFFFF, canvasBgRatio can be used to specify their ratio in the background.

Helps you specify canvas background angle in case of gradient.

This attribute if set to _1_, shows a border around the canvas of the chart.

Default value: 0

Lets you specify canvas border color.

Lets you specify canvas border thickness.

Lets you control transparency of canvas border.

If you've opted to show a label for any of your vLines in the chart, you can collectively configure whether to show border for all such labels using this attribute. If you want to show label border for just a particular vLine, you can over-ride this value by specifying border configuration for that specific vLine.

This attribute lets you set whether the vline labels will show up as rotated labels on the chart.

Default value: 0

You can load an external logo (JPEG/PNG) to your chart, this attribute lets you specify the URL. Due to cross domain security restrictions it is advised to use a logo from the same domain name as your charts.

This attribute helps you set the amount of empty space that you want to put on the left side of your logo image. Nothing is rendered in this space.

This attribute helps you set the amount of empty space that you want to put on top of your logo image. Nothing is rendered in this space.

Where to position the logo on the chart: TL - Top-left TR - Top-right BR - Bottom right BL - Bottom left CC - Center of screen

Once the logo has loaded on the chart, you can configure its opacity using this attribute.

You can also change the scale of an externally loaded logo at run-time by specifying a value for this parameter.

If you want to link the logo to an external URL, specify the link in this attribute. The link can be in FusionCharts Link format, allowing you to link to new windows, pop-ups, frames etc.

Specifies a color theme that will be applied throughout the chart.

Sets the color of the zoom pane border.

Sets the background color of the zoom pane.

Sets the alpha of the zoom pane.

Sets the thickness of the pinned line when the chart is put to pin line mode.

Sets the background color of the pin pane.

Sets the alpha of the pin pane.

Enables/disables display of tooltips for toolbar buttons.

Replaces the default tooltext of 'Switch to Pin Mode' button with provided string.

Color using which the lines on the chart will be drawn.

Thickness of the lines on the chart.

Alpha of the lines on the chart.

Specifies whether peak data will be shown.

Default value: 0 (disabled)

Defines the upper limit for peak data. Any value greater than this value will be considered peak data. If the value of minPeakDataLimit attribute is set more than maxPeakDataLimit attribute, the values between the range will be considered as peak data.

Defines the lower limit for peak data. Any value lower than this value will be considered peak data. If the value of maxPeakDataLimit attribute is set less than minPeakDataLimit attribute, the values between the range will be considered as peak data.

Color for scroll bar.

This attribute can be used to set the scroll bar to flat or the basic one.

Default value: 1

Required height for scroll bar.

Sets whether to show the left and right scroll button.

Whether to draw anchors on the chart.

This attribute sets the number of sides the anchor will have. For e.g., an anchor with 3 sides will represent a triangle, with 4 it will be a square and so on.

This attribute sets the starting angle of anchors.

Default value: 90

This attribute sets the radius (in pixels) of the anchor.

Lets you set the border color of anchors.

Helps you set border thickness of anchors.

Helps you set the background color of anchors.

Helps you set the alpha of anchor background.

This attribute is used for specifying the minimum distance (between dataplots) for the anchors to become visible.

If you want to use an external image (JPG/PNG) as an anchor, this attribute lets you specify the URL.

Note: Due to cross domain security restrictions it is advised to use an image from the same domain name as your charts.

This attribute allows to set a transparency for images displayed as anchors in charts.

Default value: 100

This attribute allows to set a scale for magnifying images displayed as anchors.

Default value: 100

This attribute sets the padding between the anchor image and the border of the anchor. For the anchor image, instead of decreasing the size of the image this attribute crops the image.

Default value: 1

Number of horizontal axis division lines that you want on the chart.

Color for divisional lines.

Thickness of divisional lines.

Alpha of divisional lines.

Whether the divisional lines should be rendered as dashed lines.

Default value: 0 (divisional lines rendered using straight lines)

Sets the length of each dash when divisional lines are rendered as dashed lines.

Sets the gap between two consecutive dashes when divisional lines are rendered as dashed lines.

Color for the Zero Plane. Zero Plane is the line/plane that appears at position 0 on the y-axis, when negative data is being shown on the chart.

Thickness of zero plane.

Alpha of zero plane.

Allows you to show or hide the value on which the zero plane exists on the y-axis. By default, the value is displayed.

Whether to show alternate colored horizontal grid bands.

Color of the alternate horizontal grid bands.

Alpha (transparency) of the alternate horizontal grid bands.

Whether to show legend on the chart.

Whether legend keys should be displayed in bold

Sets legend item font

Sets legend item font size

Sets legend item font color

Sets legend item font color on hover

The legend can be plotted at two positions on the chart - below (BOTTOM) the chart and to the right (RIGHT) of the chart.

Sets the legend caption horizontal alignment .

Whether legend caption should be displayed in bold

Sets legend caption font

Sets legend caption font size

Sets legend caption font color

You can add a caption for the entire legend by setting the same here.

Sets the color that applies on both text font and icon when they are in a disabled / hidden state

Scaling of legend icon is possible in FusionCharts XT. This attribute lets you control the size of legend icon.

Background color for the legend.

Background alpha for the legend.

Border Color for the legend.

Border thickness for the legend.

Border alpha for the legend.

Whether to show a shadow for legend.

The legend can be made drag-able by setting this attribute to 1. End viewers of the chart can drag the legend around on the chart.

If you've too many items on the legend, a scroll bar shows up on the same. This attribute lets you configure the background color of the scroll bar.

You can reverse the ordering of datasets in the legend by setting this attribute to 1.

This attribute lets you interact with the legend in your chart. When you click a legend key, the dataplots associated with that series are eliminated from the chart. Re-clicking the key causes the dataplots to reappear.

If your chart contains multiple series, the legend is displayed as a grid comprising of multiple legend keys. With the help of this attribute you can specify the number of columns that are to be displayed in the legend.

Whether to minimize legend item text wrapping.

Specifies whether drawing a custom legend icon will be enabled. All legend icon customization attributes will work only if this feature is enabled.

Default value: 0 (disabled)

Sets the border color for the legend icon.

Default value: Data plot border color

Sets the background color for the legend icon.

Default value: Data plot fill color

Sets the legend icon transparency.

Default value: 100

Sets the legend icon background transparency.

Default value: 100

Sets the number of sides for the legend icon.

Default value: 4

Sets the thickness of the legend icon border.

Default value: 1

Sets the starting angle of for drawing the legend icon.

Default value: 45

This attribute if set to 0, the legend box will be center aligned with respect to the entire width of the chart only if the total width of the legend box is more than the canvas width. By default, the legend box is center aligned with respect to the canvas width and it remains the same if the width of the legend box is less than the canvas width.

This configuration determines whether the numbers displayed on the chart will be formatted using commas, e.g., 40,000 if 'formatNumber': '1'; and 40000 if 'formatNumber': '0';.

Configuration whether to add K (thousands) and M (millions) to a number after truncating and rounding it - e.g., if formatNumberScale is set to 1, 10434 will become 1.04K . Same with numbers in millions - an M will be added at the end.

The default unit of the numbers that you're providing to the chart.

Unit of each block of the scale.

Range of the various blocks that constitute the scale.

Forces the specified lower numberScaleUnit value to be applied to data values less than the specified numberScaleValue. This attribute works only when “formatNumberScale”: “1” and the defaultNumberScale attribute is not defined.

For example, if “numberScaleUnit”: “K, M”, “numberScaleValue”: “1000, 1000”, and “forceNumberScale”: “1”, a data value of 400 will be rendered as 0.40K.

Whether recursive scaling should be applied.

How many recursions to complete during recursive scaling? -1 completes the entire set of recursion.

What character to use to separate the scales that are generated after recursion?

Using this attribute, you could add prefix to all the numbers visible on the graph. For example, to represent all dollars figure on the chart, you could specify this attribute to $ to show like $40000, $50000.

Using this attribute, you could add prefix to all the numbers visible on the graph. For example, to represent all figures quantified as per annum on the chart, you could specify this attribute to '/a' to show like 40000/a, 50000/a.

This attribute helps you specify the character to be used as the decimal separator in a number.

This attribute helps you specify the character to be used as the thousands separator in a number.

This option helps you specify the position of the thousand separator.

Number of decimal places to which all numbers on the chart will be rounded to.

Whether to add 0 padding at the end of decimal numbers. For example, If you limit the maximum number of decimal digits to 2, a number like 55.345 will be rounded to 55.34. This does not mean that all numbers will be displayed with a fixed number of decimal places. For instance 55 will not be displayed as 55.00 and 55.1 will not become 55.10. In order to have fixed number of decimal places attached to all the numbers, set this attribute to 1.

This attribute lets you set the font face (family) of all the text (data labels, values etc.) on chart. If you specify the outCnvBaseFont attribute also, then this attribute controls only the font face of text within the chart canvas bounds.

This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font size provided here.

This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font color provided here.

This attribute sets the base font family of the chart text which lies outside the canvas i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font name provided here.

This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font size provided here.

This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font color provided here.

Sets the x-axis label font family for the text.

Sets the x-axis label font color.

Specifies the x-axis label font size.

Whether to show tool tip on chart.

Background color for tool tip.

Font color for the tool-tip.

Border color for tool tip.

Sets the border transparency for tool tip.

The character specified as the value of this attribute separates the name and value displayed in tool tip.

Whether to show shadow for tool-tips on the chart.

There are two ways of displaying tool-tips in a zoomline chart. One is to use a cross-line, which is a vertical line that displays data values for all series on that data point. The other way is to use traditional tool-tips that display values on a data point when hovered upon. Default value is 1 which uses cross-line. Set this attribute value to 0 to use traditional tool-tips.

If you've opted to show the tool-tips using cross-line, this attribute lets you define the thickness of cross-line.

If you've opted to show the tool-tips using cross-line, this attribute lets you define the color of cross-line.

If you've opted to show the tool-tips using cross-line, this attribute lets you define the transparency of cross-line.

This attribute lets you define the label font size of cross-line.

This attribute lets you define the label font of cross-line.

This attribute lets you define the font size of values getting displayed using cross-line.

This attribute lets you define the font of values getting displayed using cross-line.

Where to position the toolbar on the chart: TL - Top-left TR - Top-right BR - Bottom right BL - Bottom left CC - Center of screen

Sets the toolbox position on the chart with respect to x-axis.

Sets the toolbox position on the chart with respect to y-axis.

Sets the horizontal alignment of the toolbar on the chart.

Sets the vertical alignment of the toolbar on the chart

Sets the color of the toolbar buttons.

Enables/disables display of tooltips for toolbar buttons.

You can change the scale of the toolbar by specifying a value for this attribute.

You can reverse the order in which the toolbar icons are rendered using this attribute.

Whether the chart will allow exporting to images, PDFs, SVG or XLS.

Default value: 0

In case of server-side exporting, the action specifies whether the exported image will be sent back to client as download, or whether it'll be saved on the server.

Default value: download

In case of server side exporting, this refers to the path of the server-side export handler (the ready-to-use scripts that we provide).

Lets you configure what output formats to allow for export of chart, in the export context menu, and also customize the label for each menu item. The attribute value should be a pipe (|) delimited separated key-value pair. Example: exportFormats: 'PNG=Export as High Quality Image|JPG|PDF=Export as PDF File'

This attributes sets the modes of export. To enable client-side exporting, set this attribute to client.

Default value: auto.

Note: Starting v3.12.1, the exportMode attribute replaces the exportAtClientSide attribute. However, you don’t need to make any changes to the existing setup because, the FusionCharts library comes with the proper mapping already provided.

Whether the menu items related to export (e.g., Save as JPEG etc.) will appear in the context menu of chart.

In case of server-side exporting and when using download as action, this lefts you configure whether the return image, PDF, SVG or XLS will open in same window (as an attachment for download), or whether it will open in a new window.

Default value: _self

Using this attribute you can specify the name (excluding the extension) of the output (export) file.

Whether to enable hover effect on charts for all elements

Whether to enable hover effect on charts for data plots (e.g., column, pie) only

Specifies the hover color for the data plots

Specifies the hover alpha for data plots

This attribute lets you control the space (in pixels) between the sub-caption and top of the chart canvas. If the sub-caption is not defined, it controls the space between caption and top of chart canvas. If neither caption, nor sub-caption is defined, this padding does not come into play.

Using this, you can set the distance between the top end of x-axis title and the bottom end of data labels (or canvas, if data labels are not to be shown).

Using this, you can set the distance between the right end of y-axis title and the start of y-axis values (or canvas, if the y-axis values are not to be shown).

This attribute helps you set the horizontal space between the canvas left edge and the y-axis values or trend line values (on left/right side). This is particularly useful, when you want more space between your canvas and y-axis values.

It sets the vertical space between the end of columns and start of value textboxes. This basically helps you control the space you want between your columns/anchors and the value textboxes.

Amount of empty space that you want to put on the left side of your chart. Nothing is rendered in this space.

Amount of empty space that you want to put on the right side of your chart. Nothing is rendered in this space.

Amount of empty space that you want to put on the top of your chart. Nothing is rendered in this space.

Amount of empty space that you want to put at the bottom of your chart. Nothing is rendered in this space.

Padding of legend from right/bottom side of canvas

Lets you set the space between the canvas border and first & last data points

This attribute lets you control the space between the start of chart canvas and the start (x) of chart. In case of 2D charts, the canvas is the visible rectangular box. In case of 3D charts, the canvas box is the imaginary box around the 3D canvas. Using this attribute, you can control the amount of empty space between the chart left side and canvas left side. By default, FusionCharts XT automatically calculates this space depending on the elements to be placed on the chart. However, if you want to over-ride this value with a higher value, you can use this attribute to specify the same. Please note that you cannot specify a margin lower than what has been calculated by the chart. This attribute is particularly useful, when you've multiple charts placed in a page and want all their canvas start position to align with each other - so in such a case, you can set same margin value (a value large enough that it doesn't get rejected by chart owing to it being lower than the calculated value) for all such charts in the page.

Like canvasLeftMargin, this attribute lets you set the space between end of canvas and end of chart.

Like canvasLeftMargin, this attribute lets you set the space between top of canvas and top of chart.

Like canvasLeftMargin, this attribute lets you set the space between bottom of canvas and bottom of chart.

Lets you specify font face for the x-axis data labels.

Lets you specify font color for the x-axis data labels.

Lets you specify font size for the x-axis data labels.

Lets you specify the series name for a particular dataset. For example, if you're plotting a chart to indicate monthly sales analysis for 2005 and 2006, the seriesName for the first dataset will be 2005 and that of the second will be 2006. The seriesName of a dataset is shown in legend.

This attribute sets the color using which line of that dataset will be drawn

This attribute sets the alpha (transparency) of the entire dataset.

Whether to draw anchors for the particular dataset.

This attribute sets the radius (in pixels) of the anchors of the particular dataset.

Thickness of the lines for the particular dataset.

Lets you set the border color of anchors of the particular dataset.

Helps you set border thickness of anchors of the particular dataset.

Helps you set the background color of anchors of the particular dataset.

Helps you set the alpha of anchor background of the particular dataset.

Whether to include the seriesName of this dataset in legend.

Whether the line should appear as dashed.

Whether to show the trend line value on left side or right side of chart. This is particularly useful when the trend line display values on the chart are colliding with divisional lines values on the chart.

Color of the trend line and its associated text

Whether the trend will be displayed as a line or a zone (fill-colored rectangle).