Chart Attributes

Area 2D
Bar 2D
Bar 3D
Box and Whisker 2D
Bubble Chart
Candlestick Chart
Chord
Column 2D
Column 3D
Doughnut 2D
Doughnut 3D
Drag Node Chart
Drag-able Area 2D Chart
Drag-able Column 2D Chart
Drag-able Line 2D Chart
Error Bar Chart
Error Line 2D Chart
Error Scatter Chart
Funnel Chart
Gantt Chart
Heat Map Chart
Horizontal Bullet Graph
Horizontal LED
Inverse Y-axis Area Chart
Inverse Y-axis Column 2D Chart
Inverse Y-axis Line 2D Chart
Kagi Chart
Line 2D
Logarithmic Column 2D Chart
Logarithmic Line 2D Chart
Marimekko
Multi-axis Line Chart
Multi-level Pie Chart
Multi-series 2D Dual Y Combination Chart (Column + Line + Area + Spline)
Multi-series 2D Single Y Combination Chart (Column + Line + Area + Spline)
Multi-series 3D Dual Y Combination Chart (Column + Line + Area + Spline)
Multi-series 3D Single Y Combination Chart (Column + Line + Area + Spline)
Multi-series Area 2D
Multi-series Bar 2D
Multi-series Bar 3D
Multi-series Column 2D
Multi-series Column 3D
Multi-series Column 3D + Line Dual Y Axis
Multi-series Column 3D + Line Single Y-axis
Multi-series Line 2D
Multi-series Spline
Multi-series Spline Area
Multi-series Stacked Column 2D
Multi-series Stacked Column 2D + Line Dual Y Axis
Overlapped Column 2D
Overlapped Bar 2D
Pareto 2D
Pareto 3D
Pie 2D
Pie 3D
Pyramid Chart
Radar Chart
Real-time Angular
Real-time Area
Real-time Bulb
Real-time Column
Real-time Cylinder
Real-time Horizontal Linear
Real-time Line
Real-time Line (Dual Y)
Real-time Stacked Area
Real-time Stacked Column
Real-time Thermometer
Sankey Diagram
Scatter Chart
Scroll Area 2D
Scroll Bar 2D
Scroll Column 2D
Scroll Combination 2D (Dual Y)
Scroll Combination 2D (Single Y)
Scroll Line 2D
Scroll Multi-series Stacked Column 2D
Scroll Multi-series Stacked Column 2D + Line (Dual Y)
Scroll Stacked Bar 2D
Scroll Stacked Column 2D
Select-scatter Chart
Single-series Spline 2D
Single-series Spline Area 2D
Spark Column
Spark Line
Spark Win/Loss
Stacked 2D Column + Line Single Y-axis
Stacked 3D Column + Line Single Y-axis
Stacked Area 2D
Stacked Area 2D Line Dual Y-axis Chart
Stacked Bar 2D
Stacked Bar 3D
Stacked Column 2D
Stacked Column 2D Line Dual Y-axis Chart
Stacked Column 3D
Stacked Column 3D + Line Dual Y Axis
Step Line Charts
Sunburst
Tree Map Chart
Vertical Bullet Graph
Vertical LED
Waterfall / Cascade Chart
Zoom Line
Zoom Line Dual Y-axis
Zoom Scatter

json
xml

{
    "chart": {
        "caption": "Sales of Liquor",
        "subCaption": "Last week",
        "xAxisName": "Day",
        "yAxisName": "Sales (In USD)",
        "numberPrefix": "$",
        "showValues": "1",
        "theme": "fusion"
    },
    "data": [
        {
            "label": "Mon",
            "value": "4123"
        },
        {
            "label": "Tue",
            "value": "4633"
        },
        {
            "label": "Wed",
            "value": "5507"
        },
        {
            "label": "Thu",
            "value": "4910"
        },
        {
            "label": "Fri",
            "value": "5529"
        },
        {
            "label": "Sat",
            "value": "5803"
        },
        {
            "label": "Sun",
            "value": "6202"
        }
    ]
}

<chart caption="Sales of Liquor" subcaption="Last week" xaxisname="Day" yaxisname="Sales (In USD)" numberprefix="$" showvalues="1" theme="fusion">
    <set label="Mon" value="4123" />
    <set label="Tue" value="4633" />
    <set label="Wed" value="5507" />
    <set label="Thu" value="4910" />
    <set label="Fri" value="5529" />
    <set label="Sat" value="5803" />
    <set label="Sun" value="6202" />
</chart>

Functional Attributes

These attributes let you control a variety of functional elements on the chart. For example, you can opt to show/hide data labels, data values. You can also set chart limits and extended properties.

chart : {

animation : Boolean [+]

This attribute gives you the option to control animation in your charts. If you do not want to animate any part of the chart, set this as 0.

Range: 0/1

animationDuration : Number [+]

This attribute sets the animation duration of the chart. animationDuration attribute is applicable only if animation of the chart is enabled.

Default value: 1 sec

Range: In seconds

palette : Number [+]

FusionCharts XT uses the concept of Color Palettes. Each chart has 5 pre-defined color palettes which you can choose from. Each palette renders the chart in a different color theme.

Range: 1-5

paletteColors : String [+]

While the palette attribute allows to select a palette theme that applies to chart background, canvas, font and tool-tips, it does not change the colors of data items (i.e., column, line, pie etc.). Using paletteColors attribute, you can specify your custom list of hex colors for the data items. The list of colors have to be separated by comma e.g., "paletteColors": "#FF0000, #0372AB, #FF5904...". The chart will cycle through the list of specified colors and then render the data plot accordingly. To use the same set of colors throughout all your charts in a web application, you can store the list of palette colors in your application globally and then provide the same in each chart JSON.

Range: List of hex color codes separated by comma

connectNullData : Boolean [+]

This attribute lets you control whether empty data sets in your data will be connected to each other OR do they appear as broken data sets.

Range: 0/1

showLabels : Boolean [+]

It sets the configuration whether the x-axis labels will be displayed or not.

Range: 0/1

maxLabelHeight : Number [+] 3.5.0

This attribute can be used to set the maximum height for the x-axis labels (data labels) excluding the x-axis title. If any label goes beyond this height, the label will be truncated. In stagger mode, the number of stagger lines will be reduced if they exceed this value.

Range: In Pixels

labelDisplay : String [+]

Using this attribute, you can customize the alignment of data labels (x-axis labels). There are 5 options: AUTO, WRAP, STAGGER, ROTATE or NONE. By default, this attribute is set to AUTO mode which means that the alignment of the data labels is determined automatically depending on the size of the chart. WRAP wraps the label text if it is too long to fit in one line. ROTATE rotates the labels vertically. STAGGER divides the labels into multiple lines.

Range: 'AUTO', 'WRAP', 'STAGGER', 'ROTATE', 'NONE'

useEllipsesWhenOverflow : Boolean [+] 3.2.1

When enabled in auto mode, long data labels are truncated by adding ellipses to prevent them from overflowing the chart background. The default value is 1.

Range: 0/1

rotateLabels : Boolean [+]

This attribute lets you set whether the data labels will show up as rotated labels on the chart.

Range: 0/1

slantLabels : Boolean [+]

If you've opted to show rotated labels on chart, this attribute lets you set the configuration whether the labels will show as slanted labels or fully vertical ones.

Range: 0/1

labelStep : Number [+]

By default, all the labels are displayed on the chart. However, if you've a set of streaming data (like name of months or days of week), you can opt to show every n-th label for better clarity. This attribute just lets you do so. When a value greater than 1 (n) is set to this attribute, the first label from left and every label at the n-th position from left will be displayed. e.g., a chart showing data for 12 months and set with labelStep: 3 will show labels for January, April, July, and October. The rest of the labels will be skipped.

Range: 1 or above

staggerLines : Number [+]

If you've opted for STAGGER mode as labelDisplay, using this attribute you can control how many lines to stagger the label to. By default, all labels are displayed in a single line.

Range: 2 or above

showValues : Boolean [+]

Sets the configuration whether data values will be displayed along with the data plot on chart.

Range: 0/1

valuePosition : String [+] 3.2

If you've opted to show data values on the chart, this attribute lets you adjust the vertical alignment of data values with respect to dataplots. By default, this attribute is set to AUTO mode in which the alignment of each data value is determined automatically based on the position of each plot point. In ABOVE mode, data values are displayed above the plot points unless a plot point is too close to the upper edge of the canvas while in BELOW mode, data values are displayed below the plot points unless a plot point is too close to the lower edge of the canvas.

Range: "ABOVE", "BELOW", "AUTO"

rotateValues : Boolean [+]

If you've opted to show data values, you can rotate them using this attribute.

Range: 0/1

showLimits : Boolean [+]

Whether to show chart limit values. If not specified showYAxisValues attribute overrides this value.

Range: 0/1

showDivLineValues : Boolean [+]

Whether to show div line values. If not specified showYAxisValues attribute overrides this value.

Range: 0/1

adjustDiv : Boolean [+]

FusionCharts XT automatically tries to adjust divisional lines and limit values based on the data provided. However, if you want to set your explicit lower and upper limit values and number of divisional lines, first set this attribute to false. That will disable automatic adjustment of divisional lines.

Range: 0/1

clickURL : String [+]

The entire chart can now act as a hotspot. Use this URL to define the hotspot link for the chart. The link can be specified in FusionCharts Link format.

clickURLOverridesPlotLinks : Boolean [+] 3.7.0

Sets whether the clickURL attribute (that sets a link to which the user is directed when the chart is clicked) overrides the link attribute (that sets a link to which the user is directed when a data plot is clicked).

Default value: 0 (clickURL does not override link)

Range: 0/1

setAdaptiveYMin : Boolean [+]

This attribute lets you set whether the y-axis lower limit will be 0 (in case of all positive values on chart) or should the y-axis lower limit adapt itself to a different figure based on values provided to the chart.

Range: 0/1

hasRTLText : Number [+] 3.7.0

This attribute, when set to 1, indicates to the chart that the text (rendered on the chart) may contain RTL characters and the textual display has to be managed accordingly.

showPrintMenuItem : Boolean [+]

Whether to show "Print Chart" item in the context menu of the chart? Even if you opt to hide the item in context menu, you can still opt to invoke print() JavaScript method of the chart to print the same.

Range: 0/1

plotBinSize : Number [+] 3.12.0

This attribute is used to skip the data plot without any change in visualization. When set to 1, minimum one data plot will be rendered within the width of one pixel.

Example, if plotBinSize: 1, minimum one column plot will be rendered within the width of one pixel. For line and area charts, minimum of two anchors connecting one single line will be drawn. If plotBinSize: 0.5, minimum two column plot will be rendered within the width of one pixel. Data skipping can be disabled by setting this attribute to 0.

Default value: 0.5

Range: In Pixels

labelBinSize : Number [+] 3.12.0

This attribute is used to skip the labels of the data plots. When set to 1, minimum one label will be displayed within the width of one pixel. To disable this label skipping, set this attribute to 0.

Default value: 1

Range: In Pixels

theme : String [+]

This attribute changes the theme of the chart. There are 7 types of themes which have been made according to the different color combinations.

Range: 'fusion', 'gammel', 'candy', 'ocean', 'zune', 'carbon', 'umber'

}

These attributes let you set and configure custom chart messages, using text as well as images. These attributes are supported in FusionCharts constructor (FusionCharts({ })).

FusionCharts : {

baseChartMessageFont : String [+] 3.5.0

This attribute allows to set a custom font for all chart messages.

baseChartMessageFontSize : Number [+] 3.5.0

This attribute allows to set a custom font size for all chart messages.

Range: In pixels

baseChartMessageColor : Color [+] 3.5.0

This attribute allows to set a custom font color for all chart messages.

Range: Hex Color Code

baseChartMessageImageHAlign : String [+] 3.7.0

This attribute allows to set a custom horizontal alignment for all images displayed as chart messages.

Default value: middle

Range: left, middle, right

baseChartMessageImageVAlign : String [+] 3.7.0

This attribute allows to set a custom vertical alignment for all images displayed as chart messages.

Default value: middle

Range: top, middle, bottom

baseChartMessageImageAlpha : Number [+] 3.7.0

This attribute allows to set a transparency for all images displayed as chart messages.

Default value: 100

Range: 0 - 100

baseChartMessageImageScale : Number [+] 3.7.0

This attribute allows to set a scale for magnifying all images displayed as chart messages.

Default value: 100

Range: 0-300

loadMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed when a chart begins to load. To display an image as the chart message, prefix I- to the image URL.

loadMessageFont : String [+] 3.5.0

This attribute allows to set the font for the message displayed when a chart begins to load.

Range: Font Name

loadMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed when a chart begins to load.

Range: In pixels

loadMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed when a chart begins to load.

Range: Hex Color Code

loadMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart loadMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

loadMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart loadMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

loadMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart loadMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

loadMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart loadMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

typeNotSupportedMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed when the specified chart type is not supported. To display an image as the chart message, prefix I- to the image URL.

typeNotSupportedMessageFont : String [+] 3.5.0

This attribute allows to set the font for the message displayed when the specified chart type is not supported.

Range: Font Name

typeNotSupportedMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed when the specified chart type is not supported.

Range: In pixels

typeNotSupportedMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed when the specified chart type is not supported.

Range: Hex Color Code

typeNotSupportedMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

typeNotSupportedMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

typeNotSupportedMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

typeNotSupportedMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

renderErrorMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed if an error is encountered while rendering the chart. To display an image as the chart message, prefix I- to the image URL.

renderErrorMessageFont : String [+] 3.5.0

This attribute allows to set a font for the message displayed if an error is encountered while rendering the chart.

Range: Font Name

renderErrorMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed if an error is encountered while rendering the chart.

Range: In pixels

renderErrorMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed if an error is encountered while rendering the chart.

Range: Hex Color Code

renderErrorMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart renderErrorMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

renderErrorMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart renderErrorMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

renderErrorMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart renderErrorMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

renderErrorMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart renderErrorMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

dataLoadStartMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed when chart data begins loading. To display an image as the chart message, prefix I- to the image URL.

dataLoadStartMessageFont : String [+] 3.5.0

This attribute allows to set a font for the message displayed when chart data begins loading.

Range: Font Name

dataLoadStartMessageFontSize : String [+] 3.5.0

This attribute allows to set the font size for the message displayed when chart data begins loading.

Range: In pixels

dataLoadStartMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed when chart data begins loading.

Range: Hex Color Code

dataLoadStartMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

dataLoadStartMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

dataLoadStartMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

dataLoadStartMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

dataEmptyMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed if the data loaded for a chart is empty. To display an image as the chart message, prefix I- to the image URL.

dataEmptyMessageFont : String [+] 3.5.0

This attribute allows to set the font for the message displayed if the data loaded for a chart is empty

Range: Font Name

dataEmptyMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed if the data loaded for a chart is empty.

Range: In pixels

dataEmptyMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed if the data loaded for a chart is empty.

Range: Hex Color Code

dataEmptyMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

dataEmptyMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

dataEmptyMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

dataEmptyMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

dataLoadErrorMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed if an error is encountered while loading chart data. To display an image as the chart message, prefix I- to the image URL.

dataLoadErrorMessageFont : String [+] 3.5.0

This attribute allows to set a font for the message displayed if an error is encountered while loading chart data.

Range: Font Name

dataLoadErrorMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed if an error is encountered while loading chart data.

Range: In pixels

dataLoadErrorMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed if an error is encountered while loading chart data.

Range: Hex Color Code

dataLoadErrorMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

dataLoadErrorMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

dataLoadErrorMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

dataLoadErrorMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

dataInvalidMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed if the data to be loaded for the chart is invalid. To display an image as the chart message, prefix I- to the image URL.

dataInvalidMessageFont : String [+] 3.5.0

This attribute allows to set the font for the message displayed if the specified chart data is invalid.

Range: Font Name

dataInvalidMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed if the specified chart data is invalid.

Range: In pixels

dataInvalidMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed if the specified chart data is invalid.

Range: Hex Color Code

dataInvalidMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

dataInvalidMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

dataInvalidMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

dataInvalidMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

}

Chart Titles and Axis Names

Using these attributes, you can set the various headings and titles of chart like caption, sub-caption, x-axis and y-axis names etc.

chart : {

caption : String [+]

Caption of the chart.

subCaption : String [+]

Sub-caption of the chart.

xAxisName : String [+]

X-axis title of the chart.

yAxisName : String [+]

Y-axis title of the chart.

}

Chart Caption Cosmetics

These attributes let you configure the cosmetics of chart caption and sub-caption.

chart : {

captionAlignment : String [+]

Sets horizontal alignment of caption

Range: "left", "center", "right"

captionOnTop : Boolean [+]

Whether caption should be on top of the data plot area

Range: 0/1

captionFontSize : Number [+]

Sets the caption font size in pixels

Range: 6 - 72

subCaptionFontSize : Number [+]

Sets the sub-caption font size (in pixels)

Range: 6 - 72

captionFont : String [+]

Sets the caption font family

Range: Font Name

subCaptionFont : String [+]

Sets the sub-caption font family

Range: Font Name

captionFontColor : Color [+]

Sets the caption font color

Range: Hex Color Code

subCaptionFontColor : Color [+]

Sets the sub-caption font color

Range: Hex Color Code

captionFontBold : Boolean [+]

Whether the caption font should be displayed in bold

Range: 0/1

subCaptionFontBold : Boolean [+]

Whether the sub caption font should be displayed in bold

Range: 0/1

alignCaptionWithCanvas : Boolean [+]

Whether the caption is aligned with the canvas. Else, it will be aligned with the entire chart area

Range: 0/1

captionHorizontalPadding : Number [+]

If caption is not centre aligned, lets you configure the padding (in pixels) from either edge. Will be ignored if caption is centre aligned.

Range: In Pixels

}

Chart Axis Configuration Attributes

Using these attributes, you can set and configure x-axis labels, y-axis values and set chart cosmetics for the axis like color, alpha, etc.

chart : {

showXAxisLine : Boolean [+]

This attribute if set to _0_, hides the x-axis of the chart.

Default value: 1

Range: 0/1

xAxisPosition : String [+]

This attribute sets the position of the x-axis in the chart.

Default value: Bottom

Range: Top, Bottom

yAxisPosition : String [+]

This attribute sets the position of the y-axis in the chart.

Default value: Left

Range: Left, Right

xAxisLineColor : Color [+]

Sets color of the x-axis of the chart.

Range: Hex Color Code

axisLineAlpha : Number [+]

Sets the transparency of the x-axis line. Will work only when showxaxisline is set to 1.

Range: 0 - 100

showYAxisValues : Boolean [+]

FusionCharts XT y-axis is divided into vertical sections using div (divisional) lines. Each div line assumes a value based on its position. Using this attribute you can set whether to show those div line (y-axis) values or not. This attribute shows or hides the y-axis divisional lines and limits. The values of showLimits and showDivLineValues, if specified explicitly, overrides the value of this attribute.

Range: 0/1

yAxisValuesStep : Number [+]

By default, all div lines show their values. However, you can opt to display every x(th) div line value using this attribute.

Range: 1 or above

rotateYAxisName : Boolean [+]

If you do not wish to rotate y-axis name, set this as 0. It specifically comes to use when you've the special characters (UTF-8) in your y-axis name that do not show up in rotated mode.

Range: 0/1

yAxisNameWidth : Number [+]

If you opt to not rotate y-axis name, you can choose a maximum width that will be applied to y-axis name.

Range: (In Pixels)

yAxisMinValue : Number [+]

This attribute helps you explicitly set the lower limit of the chart. If you don't specify this value, it is automatically calculated by FusionCharts XT based on the data provided by you.

Range: Numeric Value

yAxisMaxValue : Number [+]

This attribute helps you explicitly set the upper limit of the chart. If you don't specify this value, it is automatically calculated by FusionCharts XT based on the data provided by you.

Range: Numeric Value

forceYAxisValueDecimals : Boolean [+] 3.2

Whether to forcefully attach decimal places to all y-axis values. For example, If you limit the maximum number of decimal digits to 2, a number like 55.345 will be rounded to 55.34. This does not mean that all y-axis numbers will be displayed with a fixed number of decimal places. For instance 55 will not be displayed as 55.00 and 55.1 will not become 55.10. In order to have fixed number of decimal places attached to all y-axis numbers, set this attribute to 1.

Range: 0/1

yAxisValueDecimals : Number [+]

If you've opted to not adjust div lines, you can specify the div line values decimal precision using this attribute.

Range: 0-10

}

x-Axis Name Cosmetics

To configure the font cosmetics of x-axis name (title), you can use the following attributes.

chart : {

xAxisNameFont : String [+]

Sets the x-axis font family for the text

Range: Font Name

xAxisNameFontColor : Color [+]

Sets the x-axis font color

Range: Hex Color Code

xAxisNameFontSize : Number [+]

Specifies the x-axis font size

Range: 6 - 72

xAxisNameFontBold : Boolean [+]

Whether x-axis font should be bold

Range: 0/1

xAxisNameFontItalic : Boolean [+]

Whether x-axis font should be italicized

Range: 0/1

xAxisNameBgColor : Color [+]

Sets the background color for x-axis text

Range: Hex Color Code

xAxisNameBorderColor : Color [+]

Sets the border around the x-axis text

Range: Hex Color Code

xAxisNameAlpha : Number [+]

Sets the x-axis alpha including font and background

Range: 0 - 100

xAxisNameFontAlpha : Number [+]

Sets the x-axis font alpha

Range: 0 - 100

xAxisNameBgAlpha : Number [+]

Sets the x-axis background alpha

Range: 0 - 100

xAxisNameBorderAlpha : Number [+]

Sets the x-axis border alpha

Range: 0 - 100

xAxisNameBorderPadding : Number [+]

Sets the x-axis border padding

Range: In Pixels

xAxisNameBorderRadius : Number [+]

Sets the x-axis border radius

Range: In Pixels

xAxisNameBorderThickness : Number [+]

Sets the x-axis border thickness

Range: In Pixels

xAxisNameBorderDashed : Boolean [+]

Whether the border around the x-axis name should be rendered using dashed lines.

Default value: 0 (border rendered using straight lines)

Range: 0/1

xAxisNameBorderDashLen : Number [+]

Sets the length of each dash when the border around the x-axis name is rendered using dashed lines.

Range: In pixels

xAxisNameBorderDashGap : Number [+]

Sets the gap between consecutive dashes when the border around the x-axis name is rendered using dashed lines.

Range: In pixels

}

y-Axis Name Cosmetics

To configure the font cosmetics of y-axis name (title), you can use the following attributes.

chart : {

yAxisNameFont : String [+]

Sets the y-axis (primary / secondary) font family for the text

Range: Font Name

yAxisNameFontColor : Color [+]

Sets the y-axis (primary / secondary) font color

Range: Hex Color Code

yAxisNameFontSize : Number [+]

Specifies the y-axis (primary / secondary) font size

Range: 6 - 72

yAxisNameFontBold : Boolean [+]

Whether y-axis (primary / secondary) font should be bold

Range: 0/1

yAxisNameFontItalic : Boolean [+]

Whether y-axis (primary / secondary) font should be italicized

Range: 0/1

yAxisNameBgColor : Color [+]

Sets the background color for y-axis (primary / secondary) text

Range: Hex Color Code

yAxisNameBorderColor : Color [+]

Sets the border around the y-axis (primary / secondary) text

Range: Hex Color Code

yAxisNameAlpha : Number [+]

Sets the y-axis (primary / secondary) alpha including font and background

Range: 0 - 100

yAxisNameFontAlpha : Number [+]

Sets the y-axis (primary / secondary) font alpha

Range: 0 - 100

yAxisNameBgAlpha : Number [+]

Sets the y-axis (primary / secondary) background alpha

Range: 0 - 100

yAxisNameBorderAlpha : Number [+]

Sets the y-axis (primary / secondary) border alpha

Range: 0 - 100

yAxisNameBorderPadding : Number [+]

Sets the y-axis (primary / secondary) border padding

Range: In Pixels

yAxisNameBorderRadius : Number [+]

Sets the y-axis (primary / secondary) border radius

Range: In Pixels

yAxisNameBorderThickness : Number [+]

Sets the y-axis (primary / secondary) border thickness

Range: In Pixels

yAxisNameBorderDashed : Boolean [+]

Whether the border around the y-axis name should be rendered using dashed lines.

Default value: 0 (border rendered using straight lines)

Range: 0/1

yAxisNameBorderDashLen : Number [+]

Sets the length of each dash when the border around the y-axis name is rendered using dashed lines.

Range: In pixels

yAxisNameBorderDashGap : Number [+]

Sets the gap between two consecutive dashes when the border around the y-axis name is rendered using dashed lines.

Range: In pixels

}

Chart Cosmetics

The following attributes let you configure chart cosmetics like background color, background alpha, canvas color & alpha etc.

chart : {

bgColor : Color [+]

This attribute sets the background color for the chart. You can set any hex color code as the value of this attribute. To specify a gradient as background color, separate the hex color codes of each color in the gradient using comma. Example: #FF5904, #FFFFFF.

Range: Hex Color Code

bgAlpha : Number [+]

Sets the alpha (transparency) for the background. If you've opted for gradient background, you need to set a list of alpha(s) separated by comma.

Range: 0 - 100

bgRatio : Number [+]

If you've opted for a gradient background, this attribute lets you set the ratio of each color constituent.

Range: 0 - 100

bgAngle : Number [+]

Sets the angle of the background color, in case of a gradient.

Range: 0-360

bgImage : String [+]

To place any image (JPG/PNG/GIF) as background of the chart, enter the (path and) name of the background image. It should be in the same domain as the chart.

bgImageAlpha : Number [+]

This attribute specifies the opacity for the loaded background image.

Range: 0 - 100

bgImageDisplayMode : String [+] 3.2.2

Helps you specify the mode in which the background image is to be displayed. Stretch - expands the image to fit the entire chart area, without maintaining original image constraints. Tile - the image is repeated as a pattern on the entire chart area. Fit - fits the image proportionately on the chart area. Fill -proportionately fills the entire chart area with the image. Center - the image is positioned at the center of the chart area. None - Default mode.

Range: stretch, tile, fit, fill, center, none

bgImageVAlign : String [+] 3.2.2

Helps you to vertically align the background image.

Range: top, middle, bottom

bgImageHAlign : String [+] 3.2.2

Helps you to horizontally align the background image.

Range: left, middle, right

bgImageScale : Number [+] 3.2.2

Helps you magnify the background image.This attribute will only work when the attribute bgImageDisplayMode is set to none, center, or tile.

Range: 0-300

canvasBgColor : Color [+]

This attribute sets the background color for the chart canvas. You can set any hex color code as the value of this attribute. To specify a gradient as canvas background color, separate the hex color codes of each color in the gradient using comma. Example: #FF5904, #FFFFFF.

Range: Hex Color Code

canvasBgAlpha : Number [+]

This attribute sets the background transparency for the chart canvas. For gradient, separate the alpha value using comma. Example: 15, 50.

Range: 0 - 100

canvasBgRatio : Numbers separated by comma [+]

When a gradient is used to set the color of the canvas background, this attribute sets the ratio of the colors. Example : If the value of the canvasBgColor attribute is set as #FF5904, #FFFFFF, canvasBgRatio can be used to specify their ratio in the background.

Range: 0 - 100

canvasBgAngle : Number [+]

Helps you specify canvas background angle in case of gradient.

Range: 0-360

showcanvasborder : Boolean [+]

This attribute if set to _1_, shows a border around the canvas of the chart.

Default value: 0

Range: 0/1

canvasBorderColor : Color [+]

Lets you specify canvas border color.

Range: Hex Color Code

canvasBorderThickness : Number [+]

Lets you specify canvas border thickness.

Range: 0-5

canvasBorderAlpha : Number [+]

Lets you control transparency of canvas border.

Range: 0 - 100

showBorder : Boolean [+]

Whether to show a border around the chart or not.

Range: 0/1

borderColor : Color [+]

Border color of the chart.

Range: Hex Color Code

borderThickness : Number [+]

Border thickness of the chart.

Range: In Pixels

borderAlpha : Number [+]

Border alpha of the chart.

Range: 0 - 100

drawFullAreaBorder : Boolean [+]

When set to 0, instead of drawing a border for the entire chart canvas, this attribute will draw line on the canvas only to connect the data-points.

Default Value: 1

Range: 0/1

showVLineLabelBorder : Boolean [+]

If you've opted to show a label for any of your vLines in the chart, you can collectively configure whether to show border for all such labels using this attribute. If you want to show label border for just a particular vLine, you can over-ride this value by specifying border configuration for that specific vLine.

Range: 0/1

rotateVLineLabels : Boolean [+]

This attribute lets you set whether the vline labels will show up as rotated labels on the chart.

Default value: 0

Range: 0/1

logoURL : String [+]

You can load an external logo (JPEG/PNG) to your chart, this attribute lets you specify the URL. Due to cross domain security restrictions it is advised to use a logo from the same domain name as your charts.

Range: URL

logoLeftMargin : Number [+]

This attribute helps you set the amount of empty space that you want to put on the left side of your logo image. Nothing is rendered in this space.

Range: In Pixels

logoTopMargin : Number [+]

This attribute helps you set the amount of empty space that you want to put on top of your logo image. Nothing is rendered in this space.

Range: In Pixels

logoPosition : String [+]

Where to position the logo on the chart: TL - Top-left TR - Top-right BR - Bottom right BL - Bottom left CC - Center of screen

Range: TL, TR, BL, BR, CC

logoAlpha : Number [+]

Once the logo has loaded on the chart, you can configure its opacity using this attribute.

Range: 0 - 100

logoScale : Number [+]

You can also change the scale of an externally loaded logo at run-time by specifying a value for this parameter.

Range: 0-300

logoLink : String [+]

If you want to link the logo to an external URL, specify the link in this attribute. The link can be in FusionCharts Link format, allowing you to link to new windows, pop-ups, frames etc.

Range: URL

}

Data Plot Cosmetics

These attributes let you configure how your plot (area in case of Area chart) will appear on the chart. If the plots can show borders, you can control the border properties using the attributes listed below. Or, if they support gradient fills, you can again configure various properties of the gradient using these attributes. Various other controls over plot cosmetics can be attained using this set of attributes.

chart : {

showPlotBorder : Boolean [+]

Whether the column, area, pie etc. border will show up.

Range: 0/1

plotBorderColor : Color [+]

Color for column, area, pie border

Range: Hex Color Code

plotBorderThickness : Number [+]

Thickness for column, area, pie border

Range: 0-5

plotBorderAlpha : Number [+]

Alpha for column, area, pie border

Range: 0 - 100

plotBorderDashed : Boolean [+]

Whether the border around the data plots should be rendered using dashed lines.

Default value: 0 (border rendered using straight lines)

Range: 0/1

plotBorderDashLen : Number [+]

Sets the length of each dash when the border around the data plots are rendered using dashed lines.

Range: In pixels

plotBorderDashGap : Number [+]

Sets the gap between two consecutive dashes when the border around the data plots are rendered using dashed lines.

Range: In pixels

plotFillAngle : Number [+]

If you've opted to fill the plot (column, area etc.) as gradient, this attribute lets you set the fill angle for gradient.

Range: 0-360

plotFillRatio : Number [+]

If you've opted to fill the plot (column, area etc.) as gradient, this attribute lets you set the ratio for gradient.

Range: 0 - 100

plotFillAlpha : Number [+]

If you've opted to fill the plot (column, area etc.) as gradient, this attribute lets you set the fill alpha for gradient.

Range: 0 - 100

plotGradientColor : Color [+]

You can globally add a gradient color to the entire plot of chart by specifying the second color as this attribute. For example, if you've specified individual colors for your dataplots and now you want a gradient that ends in white. You need to specify FFFFFF (white) as this color and the chart will now draw plots as gradient.

Range: Hex Color Code

showShadow : Boolean [+]

Whether to apply the shadow effect for the data plot.

Range: 0/1

plotFillColor : Color [+]

Fill Color for the area (Hex Color Code)

Range: Hex Color Code

usePlotGradientColor : Boolean [+]

Gradient color is a color added globally to the entire plot of chart by specifying the second color in an attribute. This attribute sets the gradient color to true.

Default value: 1

Range: 0/1

drawFullAreaBorder : Boolean [+] 3.14.0

If the showPlotBorder atrribute is set to 1, set this attribute to 0 to draw only the top border of the data plot.

Range: 0/1

inheritPlotBorderColor : Boolean [+] 3.14.0

Set this attribute to 1 to inherit the data plot color of the area chart as the color of the data plot border.

Range: 0/1

}

Data Value Cosmetics

These attributes let you configure font, background and border cosmetics, of value text-field that appear for each data plot.

chart : {

valueFont : String [+]

Sets the font of the values in the chart

Range: Font Name

valueFontColor : Color [+]

Specifies the value font color

Range: Hex Color Code

valueFontSize : Number [+]

Specifies the value font size

Range: 6 - 72

valueFontBold : Boolean [+]

Whether value font should be bold

Range: 0/1

valueFontItalic : Boolean [+]

Whether value font should be italicized

Range: 0/1

valueBgColor : Color [+]

Sets the background color for value text

Range: Hex Color Code

valueBorderColor : Color [+]

Sets the border color around the value text

Range: Hex Color Code

valueAlpha : Number [+]

Sets the value alpha including font and background

Range: 0 - 100

valueFontAlpha : Number [+]

Sets the value font alpha

Range: 0 - 100

valueBgAlpha : Number [+]

Sets the value background alpha

Range: 0 - 100

valueBorderAlpha : Number [+]

Sets the value border alpha

Range: 0 - 100

valueBorderThickness : Number [+]

Sets the value border thickness

Range: In Pixels

valueBorderPadding : Number [+]

Sets the padding between the value and its surrounding border

Range: In Pixels

valueBorderRadius : Number [+]

Sets the value border radius

Range: In Pixels

valueBorderDashed : Boolean [+]

Whether the border around the data values should be rendered using dashed lines.

Default value: 0 (border rendered using straight lines)

Range: 0/1

valueBorderDashLen : Number [+]

Sets the length of each dash when the border around the data values is rendered using dashed lines.

Range: In pixels

valueBorderDashGap : Number [+]

Sets the gap between two consecutive dashes when the border around the data values is rendered using dashed lines.

Range: In pixels

textOutline : Boolean [+] 3.14.0

Set this attribute to 1 to draw a border on the data value text.

Default value: 0

Range: 0/1

}

Y-Axis Value Cosmetics

These attributes let you configure font, background and border cosmetics, of the Y-axis value text.

chart : {

yAxisValueFont : String [+] 3.14.0

Set the font family for the Y-axis value texts.

Default value: verdana,sans

Range: Font Name

yAxisValueFontColor : Color [+] 3.14.0

Sets the font color for the Y-axis value texts.

Default value: #555555

Range: Hex Color Code

yAxisValueFontSize : Number [+] 3.14.0

Sets the font size for the Y-axis value texts.

Default value: 10 px

Range: 6 - 72

yAxisValueFontBold : Boolean [+] 3.14.0

Displays the Y-axis value texts in bold.

Default value: 0

Range: 0/1

yAxisValueFontItalic : Boolean [+] 3.14.0

Displays the Y-axis value texts in italic.

Default value: 0

Range: 0/1

yAxisValueBgColor : Color [+] 3.14.0

Sets the background color for the Y-axis values.

Range: Hex Color Code

yAxisValueBorderColor : Color [+] 3.14.0

Sets the border color for the Y-axis values.

Range: Hex Color Code

yAxisValueAlpha : Number [+] 3.14.0

Sets the transparency for the Y-axis values between transparent (for 0) and opaque (for 100).

Default value: 100

Range: 0 - 100

yAxisValueBgAlpha : Number [+] 3.14.0

Sets the transparency for the Y-axis value backgrounds between transparent (for 0) and opaque (for 100).

Range: 0 - 100

yAxisValueBorderAlpha : Number [+] 3.14.0

Sets the transparency for the Y-axis values between transparent (for 0) and opaque (for 100).

Range: 0 - 100

yAxisValueBorderPadding : Number [+] 3.14.0

Sets the border padding for the Y-axis values.

Range: In Pixels

yAxisValueBorderRadius : Number [+] 3.14.0

Sets the border radius for the Y-axis values.

Range: In Pixels

yAxisValueBorderThickness : Number [+] 3.14.0

Sets the border thickness for the Y-axis values.

Range: In Pixels

yAxisValueBorderDashed : Boolean [+] 3.14.0

Makes the Y-axis value borders dashed.

Default value: 0 (border rendered using straight lines)

Range: 0/1

yAxisValueBorderDashLen : Number [+] 3.14.0

Sets the lengths of the individual dashes when the Y-axis value borders are dashed.

Range: In pixels

yAxisValueBorderDashGap : Number [+] 3.14.0

Sets the gaps between individual dashes when the Y-axis value borders are dashed.

Range: In pixels

yAxisValueLink : URL [+] 3.14.0

Sets a target link for all Y-axis values.

}

Anchors

On area charts, anchors (or marker points) are polygons which appear at the joint of two consecutive line/area points. These are indicators to show the position of data points. The anchors handle tool tips and links for the data points. So, if you opt to not render anchors on a chart, the tool tips and links won't function. You can, however, hide them by setting alpha to 0 and still enable tool tips and links. In area charts, anchors are set transparent by default. In case you wish to show the anchor, use anchorAlpha="100" attribute. You can customize all the facets of anchors using the properties below.

chart : {

drawAnchors : Boolean [+]

Whether to draw anchors on the chart.

Range: 0/1

anchorSides : Number [+]

This attribute sets the number of sides the anchor will have. For e.g., an anchor with 3 sides will represent a triangle, with 4 it will be a square and so on.

Range: 3-20

anchorStartAngle : Number [+]

This attribute sets the starting angle of anchors.

Default value: 90

Range: 0 - 360

anchorRadius : Number [+]

This attribute sets the radius (in pixels) of the anchor.

Range: In pixels

anchorBorderColor : Color [+]

Lets you set the border color of anchors.

Range: Hex Color Code

anchorBorderThickness : Number [+]

Helps you set border thickness of anchors.

Range: In Pixels

anchorBgColor : Color [+]

Helps you set the background color of anchors.

Range: Hex Color Code

anchorAlpha : Number [+]

Helps you set the alpha of entire anchors. If you need to hide the anchors on chart but still enable tool tips, set this as 0.

Range: 0 - 100

anchorBgAlpha : Number [+]

Helps you set the alpha of anchor background.

Range: 0 - 100

anchorImageUrl : FusionCharts link format [+]

If you want to use an external image (JPG/PNG) as an anchor, this attribute lets you specify the URL.

Note: Due to cross domain security restrictions it is advised to use an image from the same domain name as your charts.

Range: URL

anchorImageAlpha : Number [+]

This attribute allows to set a transparency for images displayed as anchors in charts.

Default value: 100

Range: 0 - 100

anchorImageScale : Number [+]

This attribute allows to set a scale for magnifying images displayed as anchors.

Default value: 100

Range: 0 - 100

anchorImagePadding : Number [+] 3.10.0

This attribute sets the padding between the anchor image and the border of the anchor. For the anchor image, instead of decreasing the size of the image this attribute crops the image.

Default value: 1

Range: In Pixels

}

Divisional Lines & Grids

Using this set of attributes, you can control the properties of divisional lines, zero plane and alternate color bands. Divisional Lines are horizontal or vertical lines running through the canvas. Each divisional line signifies a smaller unit of the entire axis thus aiding the users in interpreting the chart. The zero plane is a 2D plane that signifies the 0 position on the chart. If there are no negative numbers on the chart, you won't see a visible zero plane. Alternate color bands are colored blocks between two successive divisional lines.

chart : {

numDivLines : Number [+]

Number of horizontal axis division lines that you want on the chart.

Range: Numeric value > 0

divLineColor : Color [+]

Color for divisional lines.

Range: Hex Color Code

divLineThickness : Number [+]

Thickness of divisional lines.

Range: 1-5

divLineAlpha : Number [+]

Alpha of divisional lines.

Range: 0 - 100

divLineDashed : Boolean [+]

Whether the divisional lines should be rendered as dashed lines.

Default value: 0 (divisional lines rendered using straight lines)

Range: 0/1

divLineDashLen : Number [+]

Sets the length of each dash when divisional lines are rendered as dashed lines.

Range: In pixels

divLineDashGap : Number [+]

Sets the gap between two consecutive dashes when divisional lines are rendered as dashed lines.

Range: In pixels

zeroPlaneColor : Color [+]

Color for the Zero Plane. Zero Plane is the line/plane that appears at position 0 on the y-axis, when negative data is being shown on the chart.

Range: Hex Color Code

zeroPlaneThickness : Number [+]

Thickness of zero plane.

Range: In Pixels

zeroPlaneAlpha : Number [+]

Alpha of zero plane.

Range: 0 - 100

showZeroPlaneValue : Boolean [+] 3.2.2 - SR3

Allows you to show or hide the value on which the zero plane exists on the y-axis. By default, the value is displayed.

Range: 0/1

showAlternateHGridColor : Boolean [+]

Whether to show alternate colored horizontal grid bands.

Range: 0/1

alternateHGridColor : Color [+]

Color of the alternate horizontal grid bands.

Range: Hex Color Code

alternateHGridAlpha : Number [+]

Alpha (transparency) of the alternate horizontal grid bands.

Range: 0 - 100

numVDivLines : Number [+]

Number of vertical axis division lines

Range: Numeric value > 0

vDivLineColor : Color [+]

Color of vertical axis division lines.

Range: Hex Color Code

vDivLineThickness : Number [+]

Thickness of vertical axis division lines.

Range: In Pixels

vDivLineAlpha : Number [+]

Alpha of vertical axis division lines.

Range: 0 - 100

vDivLineDashed : Boolean [+]

Whether the vertical divisional lines should be rendered as dashed lines.

Default value: 0 (vertical divisional lines using straight lines)

Range: 0/1

vDivLineDashLen : Number [+]

Sets the width of each dash when vertical divisional lines are rendered as dashed lines.

Range: In pixels

vDivLineDashGap : Number [+]

Sets the gap between two consecutive dashes when vertical divisional lines are rendered as dashed lines.

Range: In pixels

showAlternateVGridColor : Boolean [+]

Whether to show alternate vertical colored grid bands.

Range: 0/1

alternateVGridColor : Color [+]

Color of alternate vertical colored grid bands.

Range: Hex Color Code

alternateVGridAlpha : Number [+]

Alpha of alternate vertical colored grid bands.

Range: 0 - 100

}

Number Formatting

FusionCharts XT offers you a lot of options to format your numbers on the chart. Using the attributes below, you can control a myriad of options like: Formatting of commas and decimals Number prefixes and suffixes Decimal places to which the numbers will round to Scaling of numbers based on a user defined scale Custom number input formats

chart : {

formatNumber : Boolean [+]

This configuration determines whether the numbers displayed on the chart will be formatted using commas, e.g., 40,000 if 'formatNumber': '1'; and 40000 if 'formatNumber': '0';.

Range: 0/1

formatNumberScale : Boolean [+]

Configuration whether to add K (thousands) and M (millions) to a number after truncating and rounding it - e.g., if formatNumberScale is set to 1, 1043 will become 1.04K (with decimals set to 2 places). Same with numbers in millions - an M will be added at the end.

Range: 0/1

defaultNumberScale : String [+]

The default unit of the numbers that you're providing to the chart.

numberScaleUnit : String [+]

Unit of each block of the scale.

numberScaleValue : String [+]

Range of the various blocks that constitute the scale.

forceNumberScale : Boolean [+] 3.9.0

If a data value is less than the lowest given number is the number scale, this attribute forces the lower value of the numberScaleUnit to be applied to that data value. This attribute works only when "formatNumberScale": "1" and the defaultNumberScale attribute is not defined. For example, if "numberScaleUnit": "K, M", "numberScaleValue": "1000, 1000", and "forceNumberScale": "1", a data value of 400 will be rendered as 0.40K.

Range: 0/1

scaleRecursively : Boolean [+] 3.2.2 - SR3

Whether recursive scaling should be applied.

Range: 0/1

maxScaleRecursion : Number [+] 3.2.2 - SR3

How many recursions to complete during recursive scaling? -1 completes the entire set of recursion.

scaleSeparator : String [+] 3.2.2 - SR3

What character to use to separate the scales that are generated after recursion?

numberPrefix : String [+]

Using this attribute, you could add prefix to all the numbers visible on the graph. For example, to represent all dollars figure on the chart, you could specify this attribute to $ to show like $40000, $50000.

Range: Character

numberSuffix : String [+]

Using this attribute, you could add a suffix to all the numbers visible on the graph. For example, to represent all figures quantified as per annum on the chart, you could specify this attribute to '/a' to show like 40000/a, 50000/a.

Range: Character

decimalSeparator : String [+]

This attribute helps you specify the character to be used as the decimal separator in a number.

Range: Character

thousandSeparator : String [+]

This attribute helps you specify the character to be used as the thousands separator in a number.

Range: Character

thousandSeparatorPosition : Number [+] 3.2.2 - SR3

This option helps you specify the position of the thousand separator.

Range:

inDecimalSeparator : String [+]

In some countries, commas are used as decimal separators and dots as thousand separators. In XML, if you specify such values, it will give an error while converting to number. So, FusionCharts XT accepts the input decimal and thousand separator from user, so that it can convert it accordingly into the required format. This attribute lets you input the decimal separator.

Range: Character

inThousandSeparator : String [+]

Range: Character

decimals : Number [+]

Number of decimal places to which all numbers on the chart will be rounded to.

Range: 0-10

forceDecimals : Boolean [+]

Whether to add 0 padding at the end of decimal numbers. For example, If you limit the maximum number of decimal digits to 2, a number like 55.345 will be rounded to 55.34. This does not mean that all numbers will be displayed with a fixed number of decimal places. For instance 55 will not be displayed as 55.00 and 55.1 will not become 55.10. In order to have fixed number of decimal places attached to all the numbers, set this attribute to 1.

Range: 0/1

}

Font Properties

Using the attributes below, you can define the generic font properties for all the text on the chart. These attributes allow you a high level control over font properties. If you intend to specify font properties for individual chart elements (like Caption, sub-caption etc.), you'll need to use the Styles feature of FusionCharts XT. Using Styles, you can also specify advanced font properties like Bold, Italics, HTML Mode etc.

chart : {

baseFont : String [+]

This attribute lets you set the font face (family) of all the text (data labels, values etc.) on chart. If you specify the outCnvBaseFont attribute also, then this attribute controls only the font face of text within the chart canvas bounds.

Range: Font Name

baseFontSize : Number [+]

This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font size provided here.

Range: 6 - 72

baseFontColor : Color [+]

This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font color provided here.

Range: Hex Color Code

outCnvBaseFont : String [+]

This attribute sets the base font family of the chart text which lies outside the canvas i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font name provided here.

Range: Font Name

outCnvBaseFontSize : Number [+]

This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font size provided here.

Range: 6 - 72

outCnvBaseFontColor : Color [+]

This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font color provided here.

Range: Hex Color Code

}

Data Label Cosmetics

These attributes let you configure the cosmetics of all data labels of the chart.

chart : {

labelFont : String [+] 3.5.0

Sets the x-axis label font family for the text.

Range: Font Name

labelFontColor : Color [+] 3.5.0

Sets the x-axis label font color.

Range: Hex Color Code

labelFontSize : Number [+] 3.5.0

Specifies the x-axis label font size.

Range: 6 - 72

labelFontBold : Boolean [+] 3.5.0

Flag indicating whether x-axis label font should be bold or not.

Range: 0/1

labelFontItalic : Boolean [+] 3.5.0

Flag indicating whether x-axis label font should be italicized or not.

Range: 0/1

labelBgColor : Color [+] 3.5.0

Sets the background color for x-axis label text.

Range: Hex Color Code

labelBorderColor : Color [+] 3.5.0

Sets the color of the border around the x-axis label text.

Range: Hex Color Code

labelAlpha : Number [+] 3.5.0

Sets the x-axis label alpha for both font and background.

Range: 0 - 100

labelBgAlpha : Number [+] 3.5.0

Sets the x-axis label background alpha.

Range: 0 - 100

labelBorderAlpha : Number [+] 3.5.0

Sets the x-axis label border alpha.

Range: 0 - 100

labelBorderPadding : Number [+] 3.5.0

Sets the x-axis label border padding.

Range: In Pixels

labelBorderRadius : Number [+] 3.5.0

Sets the x-axis label border radius.

Range: In Pixels

labelBorderThickness : Number [+] 3.5.0

Sets the x-axis label border thickness.

Range: In Pixels

labelBorderDashed : Boolean [+] 3.5.0

Whether the border around x-axis labels should be rendered using dashed lines.

Default value: 0 (border rendered using straight lines)

Range: 0/1

labelBorderDashLen : Number [+] 3.5.0

Sets the length of each dash when the border around the x-axis labels are rendered using dashed lines.

Range: In pixels

labelBorderDashGap : Number [+] 3.5.0

Sets the gap between two consecutive dashes when the border around x-axis labels are rendered using dashed lines.

Range: In pixels

labelLink : URL [+] 3.5.0

Sets a link for all x-axis labels.

}

Cross Line Attributes

Using these attributes, you can set and configure cross line and set its cosmetics like color, alpha, etc.

chart : {

drawCrossLine : Boolean [+] 3.12.0

This attribute sets a cross line (vertical line/area), when you hover a data plot.

Default value: 0

Range: 0/1

crossLineColor : Color [+] 3.12.0

This attribute sets the color of the cross line.

Default value: #EEEEEE

Range: Hex Color Code

crossLineAlpha : Number [+] 3.12.0

This attribute sets the opacity of the cross line.

Default value: 50

Range: 0 - 100

crossLineAnimation : Boolean [+] 3.12.0

This attributes enables the animation for the cross line.

Default value: 0

Range: 0/1

crossLineAnimationDuration : Number [+] 3.12.0

This attribute sets the animation duration of the cross line.

Default value: 0.09 seconds

Range: In seconds

plotColorinTooltip : Boolean [+] 3.12.0

This attribute displays the color of each plot with their labels in tooltip.

Default value: 0

Range: 0/1

drawCrossLineOnTop : Boolean [+] 3.12.1

This attribute is used to determine if the cross line will be drawn above the data plot or below the data plot.

Default value: 0

Range: 0/1

}

These attributes let you control the tool tip. You can set the background color, border color, separator character and few other details.

chart : {

showToolTip : Boolean [+]

Whether to show tool tip on chart.

Range: 0/1

toolTipBgColor : Color [+]

Background color for tool tip.

Range: Hex Color Code

toolTipColor : Color [+]

Font color for the tool-tip.

Range: Hex Color Code

toolTipBorderColor : Color [+]

Border color for tool tip.

Range: Hex Color Code

tooltipBorderAlpha : Number [+]

Sets the border transparency for tool tip.

Range: 0 - 100

toolTipSepChar : String [+]

The character specified as the value of this attribute separates the name and value displayed in tool tip.

showToolTipShadow : Boolean [+]

Whether to show shadow for tool-tips on the chart.

Range: 0/1

tooltipbgalpha : Number [+]

Sets the transparency of the tooltip.

Range: 0 - 100

tooltipborderradius : Number [+]

Sets the border radius of the tooltip.

Range: In Pixels

tooltipborderthickness : Number [+]

Sets the border thickness of the tooltip.

Range: In Pixels

toolTipPadding : Number [+]

This attribute sets the vertical space between the value and the border of the tooltip. If you want more space between the value and the border, you can use this attribute to control it.

Range: In Pixels

plottooltext : String [+]

Specify custom text for the tooltip

You can either specify a constant string as the tooltip text or you can use variable values from the data level by prefixing a $ to the attribute name, for example, $name, $value.

}

Using this set of attributes, you can customize the toolbar on the chart. The advantage of having a toolbar is that it manages all the UI action elements (context menus, checkboxes, buttons) centrally. This provides a clean, uniform look and a better, more meaningful and logical grouping.

chart : {

toolbarPosition : String [+] 3.11.3

Where to position the toolbar on the chart: TL - Top-left TR - Top-right BR - Bottom right BL - Bottom left CC - Center of screen

Range: TL, TR, BL, BR, CC

toolbarX : Number [+] 3.11.3

Sets the toolbox position on the chart with respect to x-axis.

toolbarY : Number [+] 3.11.3

Sets the toolbox position on the chart with respect to y-axis.

toolbarHAlign : String [+] 3.11.3

Sets the horizontal alignment of the toolbar on the chart.

Range: Left, Right

toolbarVAlign : String [+] 3.11.3

Sets the vertical alignment of the toolbar on the chart

Range: Top, Bottom

toolbarButtonColor : Color [+]

Sets the color of the toolbar buttons.

Range: Any (color code without the # prefix)

showToolBarButtonTooltext : Boolean [+]

Enables/disables display of tooltips for toolbar buttons.

Range: 0/1

toolbarButtonScale : Number [+]

You can change the scale of the toolbar by specifying a value for this attribute.

}

Attributes for Exporting Charts

These attributes allow you to control the saving of chart as image, SVG or XLSX.

chart : {

exportEnabled : Boolean [+]

Whether the chart will allow exporting to images, PDFs, SVG, XLSX or CSV format.

Default value: 0

Range: 0/1

exportAction : String [+]

In case of server-side exporting, the action specifies whether the exported image will be sent back to client as download, or whether it'll be saved on the server.

Default value: download

Range: 'save' or 'download'

exportHandler : String [+]

In case of server side exporting, this refers to the path of the server-side export handler (the ready-to-use scripts that we provide).

exportFormats : String [+]

Lets you configure what output formats to allow for export of chart, in the export context menu, and also customize the label for each menu item. The attribute value should be a pipe (|) delimited separated key-value pair. Example: exportFormats: 'PNG=Export as High Quality Image|JPG|PDF=Export as PDF File'

exportMode : String [+] 3.12.1

This attributes sets the modes of export. To enable client-side exporting, set this attribute to client.

Default value: auto.

Note: Starting v3.12.1, the exportMode attribute replaces the exportAtClientSide attribute. However, you don’t need to make any changes to the existing setup because, the FusionCharts library comes with the proper mapping already provided.

exportShowMenuItem : Boolean [+]

Whether the menu items related to export (e.g., Save as JPEG etc.) will appear in the context menu of chart.

Range: 0/1

exportTargetWindow : String [+]

In case of server-side exporting and when using download as action, this lefts you configure whether the return image, PDF, SVG or XLSX will open in same window (as an attachment for download), or whether it will open in a new window.

Default value: _self

Range: '_self' or '_blank'

exportFileName : String [+]

Using this attribute you can specify the name (excluding the extension) of the output (export) file.

}

Data Plot Hover Effects

If you wish to show an effect on the data plot (column, line anchor, pie etc.) when the user hovers his mouse over the data plot, these attributes let you configure the cosmetics of the hover for all data plots in the chart.

chart : {

showHoverEffect : Boolean [+]

Whether to enable hover effect on charts for all elements

Range: 0/1

anchorHoverEffect : Boolean [+]

Sets whether to enable the hover effect on charts for anchors.

Range: 0/1

anchorHoverColor : Color [+]

This attribute sets the hover color for anchors.

Range: Hex Color Code

anchorHoverAlpha : Number [+]

This attribute specifies the transparency for the anchors when hovered.

Range: 0 - 100

anchorHoverSides : Number [+]

This attribute sets the number of sides of the anchor when hovered.

Range: In Pixels

anchorHoverRadius : Number [+]

This attribute sets the radius of the anchor when hovered.

Range: In pixels

anchorBgHoverColor : Color [+]

This attribute sets the background color of anchor when hovered.

Range: Hex color code

anchorBgHoverAlpha : Number [+]

This attribute sets the transparency of anchor’s background when hovered.

Range: 0 - 100

anchorBorderHoverColor : Color [+]

Sets the border color of anchors when hovered.

Range: Hex color code

anchorBorderHoverAlpha : Number [+]

Sets the border's transparency of anchors when hovered.

Range: 0 - 100

anchorBorderHoverThickness : Number [+]

This attribute sets the border thickness of the anchors when hovered.

Range: In pixels

anchorHoverStartAngle : Number [+]

This attribute sets the starting angle of the anchors when hovered.

Range: In pixels

anchorHoverDip : Number [+]

This attribute adds a dip effect (different shapes) to the anchors on hover. When hovered a star shaped anchor is created. Using anchorSides attribute, you can specify the no. of sides for anchors. Note : If the anchors are of circular shape, this attribute won't be applied on it.

Range: 0 - 1

anchorHoverAnimation : Boolean [+]

Anchors get animated when the normal radius and the hover radius are different. To disable this effect you can set anchorHoverAnimation = 0.

Default value: 1

Range: 0/1

}

Chart Padding & Margins

The following attributes help you control chart margins and paddings. FusionCharts Suite XT allows you manually customize the padding of various elements on the chart to allow advanced manipulation and control over chart visualization. You can also define the chart margins. Chart Margins refer to the empty space left on the top, bottom, left and right of the chart. That means, FusionCharts Suite XT will not plot anything in that space. It's not necessary for you to specify any padding/margin values. FusionCharts Suite XT automatically assumes the best values for the same, if you do not specify the same.

chart : {

captionPadding : Number [+]

This attribute lets you control the space (in pixels) between the sub-caption and top of the chart canvas. If the sub-caption is not defined, it controls the space between caption and top of chart canvas. If neither caption, nor sub-caption is defined, this padding does not come into play.

Range: In Pixels

xAxisNamePadding : Number [+]

Using this, you can set the distance between the top end of x-axis title and the bottom end of data labels (or canvas, if data labels are not to be shown).

Range: In Pixels

yAxisNamePadding : Number [+]

Using this, you can set the distance between the right end of y-axis title and the start of y-axis values (or canvas, if the y-axis values are not to be shown).

Range: In Pixels

yAxisValuesPadding : Number [+]

This attribute helps you set the horizontal space between the canvas left edge and the y-axis values or trend line values (on left/right side). This is particularly useful, when you want more space between your canvas and y-axis values.

Range: In Pixels

labelPadding : Number [+]

This attribute sets the vertical space between the labels and canvas bottom edge. If you want more space between the canvas and the x-axis labels, you can use this attribute to control it.

Range: In Pixels

valuePadding : Number [+]

It sets the vertical space between the end of columns and start of value textboxes. This basically helps you control the space you want between your columns/anchors and the value textboxes.

Range: In Pixels

chartLeftMargin : Number [+]

Amount of empty space that you want to put on the left side of your chart. Nothing is rendered in this space.

Range: In Pixels

chartRightMargin : Number [+]

Amount of empty space that you want to put on the right side of your chart. Nothing is rendered in this space.

Range: In Pixels

chartTopMargin : Number [+]

Amount of empty space that you want to put on the top of your chart. Nothing is rendered in this space.

Range: In Pixels

chartBottomMargin : Number [+]

Amount of empty space that you want to put at the bottom of your chart. Nothing is rendered in this space.

Range: In Pixels

canvasPadding : Number [+]

Lets you set the space between the canvas border and first & last data points

Range: In Pixels

canvasLeftPadding : Number [+] 3.14.1

This attribute lets you set the space between the left of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the left border of the canvas. Using this attribute, you can control the amount of empty space between the chart left side and data plot which might get clipped.

Range: In Pixels

canvasRightPadding : Number [+] 3.14.1

This attribute lets you set the space between the right of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the right border of the canvas. Using this attribute, you can control the amount of empty space between the chart right side and data plot which might get clipped.

Range: In Pixels

canvasTopPadding : Number [+] 3.14.1

This attribute lets you set the space between the top of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the top border of the canvas. Using this attribute, you can control the amount of empty space between the chart's top and data plot which might get clipped.

Range: In Pixels

canvasBottomPadding : Number [+] 3.14.1

This attribute lets you set the space between the bottom of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the bottom border of the canvas. Using this attribute, you can control the amount of empty space between the chart's bottom and data plot which might get clipped.

Range: In Pixels

canvasLeftMargin : Number [+]

This attribute lets you control the space between the start of chart canvas and the start (x) of chart. In case of 2D charts, the canvas is the visible rectangular box. In case of 3D charts, the canvas box is the imaginary box around the 3D canvas. Using this attribute, you can control the amount of empty space between the chart left side and canvas left side. By default, FusionCharts XT automatically calculates this space depending on the elements to be placed on the chart. However, if you want to over-ride this value with a higher value, you can use this attribute to specify the same. Please note that you cannot specify a margin lower than what has been calculated by the chart. This attribute is particularly useful, when you've multiple charts placed in a page and want all their canvas start position to align with each other - so in such a case, you can set same margin value (a value large enough that it doesn't get rejected by chart owing to it being lower than the calculated value) for all such charts in the page.

Range: In Pixels

canvasRightMargin : Number [+]

Like canvasLeftMargin, this attribute lets you set the space between end of canvas and end of chart.

Range: In Pixels

canvasTopMargin : Number [+]

Like canvasLeftMargin, this attribute lets you set the space between top of canvas and top of chart.

Range: In Pixels

canvasBottomMargin : Number [+]

Like canvasLeftMargin, this attribute lets you set the space between bottom of canvas and bottom of chart.

Range: In Pixels

}

The data Object

In single-series charts, each instance of the data object represents a data value to be plotted on the chart. For a single-series chart, one instance of the data object looks as shown in the example below:


"data"[{
        "label": "Jan",
        "value": "10000"
    }]

Attributes of the data object are used to set and configure the data values for the chart.

data : {

anchorAlpha : Number [+]

If you want to configure data item specific anchor properties, this attribute lets you set the alpha for the anchor of that particular data item.

Range: 0 - 100

anchorBgAlpha : Number [+]

If you want to configure data item specific anchor properties, this attribute lets you set the background alpha for the anchor of that particular data item.

Range: 0 - 100

anchorBgColor : Color [+]

If you want to configure data item specific anchor properties, this attribute lets you set the background color for the anchor of that particular data item.

Range: Hex Color Code

anchorBorderColor : Color [+]

If you want to configure data item specific anchor properties, this attribute lets you set the border color for the anchor of that particular data item.

Range: Hex Color Code

anchorBorderThickness : Number [+]

If you want to configure data item specific anchor properties, this attribute lets you set the border thickness for the anchor of that particular data item.

Range: In Pixels

anchorRadius : Number [+]

If you want to configure data item specific anchor properties, this attribute lets you define the radius for the anchor of that particular data item.

Range: In Pixels

anchorSides : Number [+]

If you want to configure data item specific anchor properties, this attribute lets you define the number of sides for the anchor of that particular data item.

Range: 3 or more

anchorStartAngle : Number [+]

This attribute sets the starting angle for an anchor of a particular data.

Default value: 90

Range: 0 - 360

displayValue : String [+]

If instead of the numerical value of this data, you wish to display a custom string value, you can specify the same here. Examples are annotation for a data item etc.

label : String [+]

This attribute determines the label for the data item. The label appears on the x-axis of chart.

Note: The label attribute replaces the name attribute. Previously, either one of the attributes could be used to set the label. Support for the name attribute has been discontinued since v3.10.0.

link : String [+]

You can define links for individual data items. That enables the end user to click on data items (columns, lines, bars etc.) and drill down to other pages. To define the link for data items, use the link attribute. You can define links that open in same window, new window, pop-up window or frames. Please see "Drill-Down > Using JavaScript Functions as Links" for more information. Also, you'll need to Url Encode all the special characters (like ? and &) present in the link.

showLabel : Boolean [+]

You can individually opt to show/hide labels of individual data items using this attribute.

Range: 0/1

showValue : Boolean [+]

You can individually opt to show/hide values of individual data items using this attribute.

Range: 0/1

valueFontColor : Color [+] 3.14.1

Specifies the font color of a data value for an individual data plot.

Range: Hex Color Code

valueBgColor : Color [+] 3.14.1

Sets the background color of a value text for an individual data plot.

Range: Hex Color Code

valueBorderColor : Color [+] 3.14.1

Sets the border color around the value text for an individual data plot.

Range: Hex Color Code

toolText : String [+]

By default, FusionCharts XT shows the data item name and value as tool tip text for that data item. But, if you want to display more information for the data item as tool tip, you can use this attribute to specify the same.

value : Number [+]

Numerical value for the data item. This value will be plotted on the chart.

valuePosition : String [+] 3.2

Range: "ABOVE", "BELOW", "AUTO"

labelFont : String [+] 3.5.0

Sets the x-axis label font family for the text.

Range: Font Name

labelFontColor : Color [+] 3.5.0

Sets the x-axis label font color.

Range: Hex Color Code

labelFontSize : Number [+] 3.5.0

Specifies the x-axis label font size.

Range: 6 - 72

labelFontBold : Boolean [+] 3.5.0

Flag indicating whether x-axis label font should be bold or not.

Range: 0/1

labelFontItalic : Boolean [+] 3.5.0

Flag indicating whether x-axis label font should be italicized or not.

Range: 0/1

labelBgColor : Color [+] 3.5.0

Sets the background color for x-axis label text.

Range: Hex Color Code

labelBorderColor : Color [+] 3.5.0

Sets the color of the border around the x-axis label text.

Range: Hex Color Code

labelAlpha : Number [+] 3.5.0

Sets the x-axis label alpha for both font and background.

Range: 0 - 100

labelBgAlpha : Number [+] 3.5.0

Sets the x-axis label background alpha.

Range: 0 - 100

labelBorderAlpha : Number [+] 3.5.0

Sets the x-axis label border alpha.

Range: 0 - 100

labelBorderPadding : Number [+] 3.5.0

Sets the x-axis label border padding.

Range: In Pixels

labelBorderRadius : Number [+] 3.5.0

Sets the x-axis label border radius.

Range: In Pixels

labelBorderThickness : Number [+] 3.5.0

Sets the x-axis label border thickness.

Range: In Pixels

labelBorderDashed : Boolean [+] 3.5.0

Whether the border around x-axis label should be rendered using dashed lines.

Default value: 0 (border rendered using straight lines)

Range: 0/1

labelBorderDashLen : Number [+] 3.5.0

Sets the length of each dash when the border around the x-axis label is rendered using dashed lines.

Range: In pixels

labelBorderDashGap : Number [+] 3.5.0

Sets the gap between two consecutive dashes when the border around x-axis label is rendered using dashed lines.

Range: In pixels

labelLink : URL [+] 3.5.0

Sets the link for each individual x-axis label.

anchorHoverColor : Color [+]

This attribute can set the hover color for a particular anchor.

Range: Hex Color Code

anchorHoverAlpha : Number [+]

This attribute sets the transparency for an anchor when hovered.

Range: 0 - 100

anchorHoverSides : Number [+]

This attribute sets the number of sides for a particular anchor when hovered.

Range: In Pixels

anchorBgHoverColor : Color [+]

This attribute sets the background color of a particular anchor when hovered.

Range: Hex color code

anchorBgHoverAlpha : Number [+]

This attribute sets the transparency for a particular anchor’s background when hovered.

Range: 0 - 100

anchorBorderHoverColor : Color [+]

Sets the border color of an anchor when hovered.

Range: Hex color code

anchorBorderHoverAlpha : Number [+]

Sets the border's transparency of an anchor when hovered.

Range: 0 - 100

anchorBorderHoverThickness : Number [+]

This attribute sets the border thickness of an anchor when hovered.

Range: In pixels

anchorHoverStartAngle : Number [+]

This attribute sets the starting angle of an anchor when hovered.

Range: In pixels

anchorHoverDip : Number [+]

This attribute adds a dip effect (different shapes) to a particular anchor on hover. When hovered a star shaped anchor is created. Using anchorSides attribute, you can specify the no. of sides for anchors. Note : If the anchors are of circular shape, this attribute won't be applied on it.

Range: 0 - 1

}

Vertical Data Separator Lines

Vertical data separator lines help you separate data blocks. These lines run through the height of the chart, thereby segregating the data into two different blocks. Vertical lines are defined as shown in the example below:


"data": [{
            "label": "Grade 1",
        },
        {
            "vLine": "true",
            "label": "Appraisal"
        }]
    }]

You can configure the cosmetics of vertical separator lines using the following attributes:

data : {

vLine : String [+]

Set this attribute to true to render a vertical data separator line.

color : Color [+]

This attribute defines the color of vertical separator line

Range: Hex Color Code

thickness : Number [+]

Thickness in pixels of the vertical separator line.

Range: In Pixels

alpha : Number [+]

Alpha of the vertical separator line.

Range: 0 - 100

dashed : Boolean [+]

Whether the vertical separator line should be rendered as dashed lines.

Default value: 0 (vertical separator line rendered using straight lines)

Range: 0/1

dashLen : Number [+]

Sets the width of each dash when vertical separator line is rendered as dashed lines.

Range: In pixels

dashGap : Number [+]

Sets the gap between consecutive dashes when vertical separator line is rendered as dashed lines.

Range: In pixels

label : String [+]

Label for the vertical separator line, if to be shown.

Range:

showLabelBorder : Boolean [+]

Whether to show a border around the vLine label.

Range: 0/1

linePosition : Number [+]

Helps configure the position of vertical line i.e., if a vLine is to be plotted between 2 points Jan and Feb, user can set any position between 0 and 1 to indicate the relative position of vLine between these two points (0 means Jan and 1 means Feb). By default, it’s 0.5 to show in between the points.

Range: 0-1

labelPosition : Number [+]

Helps configure the position of the vLine label by setting a relative position between 0 and 1. In vertical charts, 0 means top of canvas and 1 means bottom. In horizontal charts, 0 means left of canvas and 1 means right.

Range: 0-1

labelHAlign : String [+]

Horizontal anchor point for the alignment of vLine label.

Range: left, center, right

labelVAlign : String [+]

Vertical anchor point for the alignment of vLine label.

Range: top, middle, bottom

}

Trend-lines

Trend-lines are horizontal lines that aid in interpretation of data with respect to some pre-determined value. For example, if you are plotting the sales data for the current year, you might want to show the previous year's average monthly sales as a trend indicator for ease of comparison. The line object, child of the trendlines object is used to add trend-lines to a chart.

Although the line object has to be defined within the trendlines object, the latter cannot be used to collectively customize trend-lines, because it does not have any attributes of its own.

The attributes of the line object, child of the trendlines object, are used to create and customize trend-lines for charts.

line : {

startValue : Number [+]

The starting value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the startValue will be 102.

Range: Numeric Value

endValue : Number [+]

The ending y-axis value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the endValue will be 109. If you do not specify a value for endValue, it will automatically assume the same value as startValue.

Range: Numeric Value

displayValue : String [+]

If you want to display a string caption for the trend line by its side, you can use this attribute. Example: displayValue='Last Month High'. When you don't supply this attribute, it automatically takes the value of startValue.

color : String [+]

Color of the trend line and its associated text

Range: Hex Color Code

isTrendZone : Boolean [+]

Whether the trend will be displayed as a line or a zone (fill-colored rectangle).

Range: 0/1

showOnTop : Boolean [+]

Whether the trend line/zone will be displayed over data plots or under them.

Range: 0/1

thickness : Number [+]

If you've opted to show the trend as a line, this attribute lets you define the thickness of trend line.

Range: In Pixels

alpha : Number [+]

Alpha of the trend line.

Range: 0 - 100

dashed : Boolean [+]

Whether the trendline should be rendered as dashed lines.

Default value: 0 (trendline rendered using straight lines)

Range: 0/1

dashLen : Number [+]

Sets the width of each dash when trendline is rendered as dashed lines.

Range: In pixels

dashGap : Number [+]

Sets the gap between consecutive dashes when trendline is rendered as dashed lines.

Range: In pixels

valueOnRight : Boolean [+]

Whether to show the trend line value on left side or right side of chart. This is particularly useful when the trend line display values on the chart are colliding with divisional lines values on the chart.

Range: 0/1

toolText : String [+]

Custom tool-text for this trendline/zone.

Range:

}

Trend-lines (Chart level attributes)

Trend-lines are horizontal lines that aid in interpretation of data with respect to some pre-determined value. For example, if you are plotting the sales data for the current year, you might want to show the previous year's average monthly sales as a trend indicator for ease of comparison. Cosmetics for all the trend-lines rendered can be attained using this set of attributes.

Although there are set of attributes of the line object, used to create and customize trend-lines, these set of attributes effect all the trend-lines rendered in your chart.

chart : {

trendlineColor : Color [+]

Sets color of all the trend lines and its associated text in the chart.

Range: Hex Color Code

trendlineThickness : Number [+]

If you've opted to show the trend as a line, this attribute lets you define the thickness of all the trend lines in your chart.

Range: In Pixels

trendlineAlpha : Number [+]

Sets transparency for all the trend lines in your charts.

Range: 0 - 100

trendLineToolText : String [+]

Sets the tooltip text of the trend-line. It accepts macros, plain text, and HTML tags, as string.

showTrendlinesOnTop : Boolean [+]

Whether all the trend line/zone will be displayed over data plots or under them.

Range: 0/1

}

Trend-lines Display Value Cosmetics

These attributes let you customize the display value set for trend-lines.

Note: These attributes belong to the chart object and not to the line object (child of the trendline object). They are, therefore, applied to all trend-lines on your chart.

chart : {

trendValueFont : String [+] 3.8.0

Sets the font family for the trend-line display value.

Range: Font Name

trendValueFontSize : Number [+] 3.8.0

Sets the font size for the trend-line display value.

Range: In pixels

trendValueFontBold : Boolean [+] 3.8.0

Sets whether the trend-line display value will be bold formatted.

Default value: 0 (not bold formatted)

Range: 0/1

trendValueFontItalic : Boolean [+] 3.8.0

Sets whether the trend-line display value will be italicized.

Default value: 0 (not italicized)

Range: 0/1

trendValueBgColor : Color [+] 3.8.0

Sets the background color for the trend-line display value.

Range: Hex Color Code

trendValueBorderColor : Color [+] 3.8.0

Sets the border color for the trend-line display value.

Range: Hex Color Code

trendValueAlpha : Number [+] 3.8.0

Sets the transparency for the trend-line display value.

Default value: 100

Range: 0 - 100

trendValueBgAlpha : Number [+] 3.8.0

Sets the transparency for the background of the trend-line display value.

Default value: 100

Range: 0 - 100

trendValueBorderAlpha : Number [+] 3.8.0

Sets the transparency for the border around the trend-line display value.

Default value: 100

Range: 0 - 100

trendValueBorderPadding : Number [+] 3.8.0

Sets padding for the border around the trend-line display value.

Range: In pixels

trendValueBorderRadius : Number [+] 3.8.0

Sets the radius for the border around the trend-line display value.

Range: In pixels

trendValueBorderThickness : Number [+] 3.8.0

Sets the thickness for the border around the trend-line display value.

Range: In pixels

trendValueBorderDashed : Boolean [+] 3.8.0

Whether the border around the trend-line display value should be rendered as dashed lines.

Default value: 0 (border rendered using straight lines)

Range: 0/1

trendValueBorderDashLen : Number [+] 3.8.0

Sets the length of each dash when the border around the trend-line display value is rendered as dashed lines.

Range: In pixels

trendValueBorderDashGap : Number [+] 3.8.0

Sets the gap between two consecutive dashes when the border around the trend-line display value is rendered as dashed lines.

Range: In pixels

}

Products

Developer

Chart Attributes

Chart Atributes

Functional Attributes

Chart Titles and Axis Names

Chart Caption Cosmetics

Chart Axis Configuration Attributes

x-Axis Name Cosmetics

y-Axis Name Cosmetics

Chart Cosmetics

Data Plot Cosmetics

Data Value Cosmetics

Y-Axis Value Cosmetics

Anchors

Divisional Lines & Grids

Number Formatting

Font Properties

Data Label Cosmetics

Cross Line Attributes

Tooltip Attributes

Attributes for Exporting Charts

Data Plot Hover Effects

Chart Padding & Margins

The data Object

Vertical Data Separator Lines

Trend-lines

Trend-lines (Chart level attributes)

Trend-lines Display Value Cosmetics

Explore

Integrations

Developers

Pricing

Resources

Company

Chart Attributes

Chart Atributes

Functional Attributes

Chart Message-related Attributes

Chart Titles and Axis Names

Chart Caption Cosmetics

Chart Axis Configuration Attributes

x-Axis Name Cosmetics

y-Axis Name Cosmetics

Chart Cosmetics

Data Plot Cosmetics

Data Value Cosmetics

Y-Axis Value Cosmetics

Anchors

Divisional Lines & Grids

Number Formatting

Font Properties

Data Label Cosmetics

Cross Line Attributes

Tooltip Attributes

Toolbar Attributes

Attributes for Exporting Charts

Data Plot Hover Effects

Chart Padding & Margins

The data Object

Vertical Data Separator Lines

Trend-lines

Trend-lines (Chart level attributes)

Trend-lines Display Value Cosmetics