Vertical Lines

Vertical (or horizontal in case of bar charts) separator lines or vlines are elements that can help differentiate between data blocks in a chart. They can be placed between any two data points, or aligned to specific data points.

Vertical lines

Set Vertical Lines

By default, the vertical lines do not appear. To display a vertical line follow the steps below:

  • Create an object under data between the data values where you want to render the vertical line.

  • Set the vLine attribute to 1.

  • Specify the display text of the vertical line using the label attribute.

  • Set the position of the vertical line using the linePosition attribute.

Refer to the code below:

{
    "chart": {
       ...
    },
    "data": [{
        "label": "Fri",
        "value": "5529"
    },
    {
        "vline": "true",
        "label": "Weekend Start",
        "linePosition": "0.7"
    },
    {
        "label": "Sat",
        "value": "5803"
    },
    {
        "label": "Sun",
        "value": "6202"
    }]
}

The chart will look like as shown below:

FusionCharts will load here..

Click here to edit the above chart.

Configure Label Positions

To set the position of the label, specify the position using the labelPosition attribute. Refer to the code below:

{
    "chart": {
        ...
    },
    "data": [{
        "label": "Fri",
        "value": "5529"
    },
    {
        "vline": "true",
        "label": "Weekend Start",
        "linePosition": "0.7",
        "labelPosition": "0.5"
    },
    {
        "label": "Sat",
        "value": "5803"
    },
    {
        "label": "Sun",
        "value": "6202"
    }]
}

The chart will look like as shown below:

FusionCharts will load here..

Click here to edit the above chart.

Configure Label Alignment

To configure the alignment of the label, the following attributes are used:

  • Set the horizontal alignment of the label using the labelHAlign attribute. The possible values for this attribute are left, center (default), and right.

  • Set the vertical alignment of the label using the labelVAlign attribute. The possible values for this attribute are top, middle (default), and bottom.

Refer to the code below:

{
    "chart": {
        ...
    },
    "data": [{
        "label": "Fri",
        "value": "5529"
    },
    {
        "vline": "true",
        "label": "Weekend Start",
        "linePosition": "0.5",
        "labelPosition": "0",
        "labelVAlign": "middle",
        "labelHAlign": "right"
    },
    {
        "label": "Sat",
        "value": "5803"
    },
    {
        "label": "Sun",
        "value": "6202"
    }]
}

The chart will look like as shown below:

FusionCharts will load here..

Click here to edit the above chart.

Show Label Borders

To add borders to the label set the showVLineLableBorder to 1 within the chart object. This attribute is used to show borders for the labels of all the vertical lines.

Refer to the code below:

{
    "chart": {
        "showVLineLabelBorder": "1"
    },
    "data": [{
        "label": "Fri",
        "value": "5529"
    },
    {
        "vline": "true",
        "label": "Weekend Start",
        "linePosition": "0.7",
        "labelPosition": "0.5",
        "labelVAlign": "middle",
        "labelHAlign": "right"
    },
    {
        "label": "Sat",
        "value": "5803"
    },
    {
        "label": "Sun",
        "value": "6202"
    }]
}

The chart will look like as shown below:

FusionCharts will load here..

Click here to edit the above chart.

In order to show label borders for specific vertical lines, set the showLabelBorder attribute to 1 for a particular vertical line under data. This attribute overrides the setting in the chart object.

Refer to the code below:

{
    "chart": {
        ...
    },
    "data": [{
        "label": "Fri",
        "value": "5529"
    },
    {
        "vline": "true",
        "label": "Weekend Start",
        "linePosition": "0.7",
        "labelPosition": "0.5",
        "labelVAlign": "middle",
        "labelHAlign": "right",
        "showLabelBorder": "1"
    },
    {
        "label": "Sat",
        "value": "5803"
    },
    {
        "label": "Sun",
        "value": "6202"
    }]
}

The chart will look like as shown below:

FusionCharts will load here..

Click here to edit the above chart.

Customize Visual Properties

To customize the visual properties of the vertical line, the following attributes are used:

  • Specify the hex code for the color of the vertical line using the color attribute.

  • Set the thickness (in pixels) of the vertical line using the thickness attribute.

  • Set the transparency of the vertical line using the alpha attribute.

  • Set the dashed attribute to 1 to view the vertical line as dashed.

  • Specify the length of each dash using the dashLen attribute.

  • Set the gap between each dash using the dashGap attribute.

Refer to the code below:

{
    "chart": {
        ...
    },
    "data": [{
        "label": "Fri",
        "value": "5529"
    },
    {
        "vline": "true",
        "label": "Weekend Start",
        "linePosition": "0.7",
        "labelPosition": "0.5",
        "labelVAlign": "middle",
        "labelHAlign": "right"
        "color": "#6da81e",
        "thickness": "2",
        "alpha": "50",
        "dashed": "1",
        "dashLen": "4",
        "dashGap": "2"
    },
    {
        "label": "Sat",
        "value": "5803"
    },
    {
        "label": "Sun",
        "value": "6202"
    }]
}

The chart will look like as shown below:

FusionCharts will load here..

Click here to edit the above chart.