Choose an item

Chart Attributes

  • a
  • b
  • c
  • d
  • e
  • f
  • g
  • h
  • i
  • j
  • k
  • l
  • m
  • n
  • o
  • p
  • q
  • r
  • s
  • t
  • u
  • v
  • w
  • x
  • y
  • z
  • Area 2D
  • Bar 2D
  • Bar 3D
  • Box and Whisker 2D
  • Bubble Chart
  • Candlestick Chart
  • Column 2D
  • Column 3D
  • Doughnut 2D
  • Doughnut 3D
  • Drag Node Chart
  • Drag-able Area 2D Chart
  • Drag-able Column 2D Chart
  • Drag-able Line 2D Chart
  • Error Bar Chart
  • Error Line 2D Chart
  • Error Scatter Chart
  • Funnel Chart
  • Gantt Chart
  • Heat Map Chart
  • Horizontal Bullet Graph
  • Horizontal LED
  • Inverse Y-axis Area Chart
  • Inverse Y-axis Column 2D Chart
  • Inverse Y-axis Line 2D Chart
  • Kagi Chart
  • Line 2D
  • Logarithmic Column 2D Chart
  • Logarithmic Line 2D Chart
  • Marimekko
  • Multi-axis Line Chart
  • Multi-level Pie Chart
  • Multi-series 2D Dual Y Combination Chart (Column + Line + Area + Spline)
  • Multi-series 2D Single Y Combination Chart (Column + Line + Area + Spline)
  • Multi-series 3D Dual Y Combination Chart (Column + Line + Area + Spline)
  • Multi-series 3D Single Y Combination Chart (Column + Line + Area + Spline)
  • Multi-series Area 2D
  • Multi-series Bar 2D
  • Multi-series Bar 3D
  • Multi-series Column 2D
  • Multi-series Column 3D
  • Multi-series Column 3D + Line Dual Y Axis
  • Multi-series Column 3D + Line Single Y-axis
  • Multi-series Line 2D
  • Multi-series Spline
  • Multi-series Spline Area
  • Multi-series Stacked Column 2D
  • Multi-series Stacked Column 2D + Line Dual Y Axis
  • Overlapped Column 2D
  • Overlapped Bar 2D
  • Pareto 2D
  • Pareto 3D
  • Pie 2D
  • Pie 3D
  • Pyramid Chart
  • Radar Chart
  • Real-time Angular
  • Real-time Area
  • Real-time Bulb
  • Real-time Column
  • Real-time Cylinder
  • Real-time Horizontal Linear
  • Real-time Line
  • Real-time Line (Dual Y)
  • Real-time Stacked Area
  • Real-time Stacked Column
  • Real-time Thermometer
  • Scatter Chart
  • Scroll Area 2D
  • Scroll Bar 2D
  • Scroll Column 2D
  • Scroll Combination 2D (Dual Y)
  • Scroll Combination 2D (Single Y)
  • Scroll Line 2D
  • Scroll Multi-series Stacked Column 2D
  • Scroll Multi-series Stacked Column 2D + Line (Dual Y)
  • Scroll Stacked Bar 2D
  • Scroll Stacked Column 2D
  • Select-scatter Chart
  • Single-series Spline 2D
  • Single-series Spline Area 2D
  • Spark Column
  • Spark Line
  • Spark Win/Loss
  • Stacked 2D Column + Line Single Y-axis
  • Stacked 3D Column + Line Single Y-axis
  • Stacked Area 2D
  • Stacked Area 2D Line Dual Y-axis Chart
  • Stacked Bar 2D
  • Stacked Bar 3D
  • Stacked Column 2D
  • Stacked Column 2D Line Dual Y-axis Chart
  • Stacked Column 3D
  • Stacked Column 3D + Line Dual Y Axis
  • Step Line Charts
  • Tree Map Chart
  • Vertical Bullet Graph
  • Vertical LED
  • Waterfall / Cascade Chart
  • Zoom Line
  • Zoom Line Dual Y-axis
  • Zoom Scatter
JavaScript alias: doughnut3d
See all attributes
  • json
  • xml
{
    "chart": {
        "caption": "Split of Revenue by Product Categories",
        "subCaption": "Last year",
        "numberPrefix": "$",
        "theme": "fusion"
    },
    "data": [
        {
            "label": "Food",
            "value": "28504"
        },
        {
            "label": "Apparels",
            "value": "14633"
        },
        {
            "label": "Electronics",
            "value": "10507"
        },
        {
            "label": "Household",
            "value": "4910"
        }
    ]
}
<chart caption="Split of Revenue by Product Categories" subcaption="Last year" numberprefix="$" theme="fusion">
    <set label="Food" value="28504" />
    <set label="Apparels" value="14633" />
    <set label="Electronics" value="10507" />
    <set label="Household" value="4910" />
</chart>

Chart Atributes

Functional Attributes

These attributes let you control a variety of functional elements on the chart. For example, you can opt to show/hide data labels, data values etc. You can also set chart limits and extended properties.

chart : {
animation : Boolean [+]

This attribute gives you the option to control animation in your charts. If you do not want to animate any part of the chart, set this as 0.

Range: 0/1

animationDuration : Number [+]

This attribute sets the animation duration of the chart. animationDuration attribute is applicable only if animation of the chart is enabled.

Default value: 1 sec

Range: In seconds

animateClockwise : Boolean [+] 3.11.0

Animates the plot in clockwise direction, if alphaAnimation attribute is set to 0

Default value: 0

Range: 0/1

alphaAnimation : Boolean [+] 3.11.0

Instead of rotational animation, you can set alpha animation which displays your chart slowly from 0 alpha to 100.

Default value : 1

Range: 0/1

palette : Number [+]

FusionCharts XT uses the concept of Color Palettes. Each chart has 5 pre-defined color palettes which you can choose from. Each palette renders the chart in a different color theme.

Range: 1-5

paletteColors : String [+]

While the palette attribute allows to select a palette theme that applies to chart background, canvas, font and tool-tips, it does not change the colors of data items (i.e., column, line, pie etc.). Using paletteColors attribute, you can specify your custom list of hex colors for the data items. The list of colors have to be separated by comma e.g., "paletteColors": "#FF0000, #0372AB, #FF5904...". The chart will cycle through the list of specified colors and then render the data plot accordingly. To use the same set of colors throughout all your charts in a web application, you can store the list of palette colors in your application globally and then provide the same in each chart JSON.

Range: List of hex color codes separated by comma

showZeroPies : Boolean [+]

Configuration whether to show pies with 0 values (and their values). Otherwise, they won't show up in the chart.

Range: 0/1

showPercentValues : Boolean [+]

Whether to show percentage values in labels of the chart.

Range: 0/1

showPercentInToolTip : Boolean [+]

Whether to show percentage values in tool tip.

Range: 0/1

showLabels : Boolean [+]

Whether to show labels on the chart.

Range: 0/1

showValues : Boolean [+]

Whether to show values on the chart.

Range: 0/1

labelSepChar : String [+]

The character to separate the data label and data values on the chart.

Range: Character

clickURL : String [+]

The entire chart can now act as a hotspot. Use this URL to define the hotspot link for the chart. The link can be specified in FusionCharts Link format.

clickURLOverridesPlotLinks : Boolean [+] 3.7.0

Sets whether the clickURL attribute (that sets a link to which the user is directed when the chart is clicked) overrides the link attribute (that sets a link to which the user is directed when a data plot is clicked).

Default value: 0 (clickURL does not override link)

Range: 0/1

useDataPlotColorForLabels : Boolean [+] 3.5.0

Uses the same data plot color for data labels.

Range: 0/1

hasRTLText : Number [+] 3.7.0

This attribute, when set to 1, indicates to the chart that the text (rendered on the chart) may contain RTL characters and the textual display has to be managed accordingly.

plotHighlightEffect : String [+]

This attribute lets you enable/disable the highlight effect, in the form of a fadeout, for the data plots corresponding to a legend item. When this attribute is enabled and the mouse pointer is hovered over a legend item label, plots belonging to the other data series fadeout, by reducing their opacity.

The fadeout effect can be customized by specifying the fadeout color and opacity using the color and alpha attributes. Eg. fadeout|color=#ff0000, alpha=60

showPrintMenuItem : Boolean [+]

Whether to show "Print Chart" item in the context menu of the chart? Even if you opt to hide the item in context menu, you can still opt to invoke print() JavaScript method of the chart to print the same.

Range: 0/1

theme : String [+]

This attribute changes the theme of the chart. There are 7 types of themes which have been made according to the different color combinations.

Range: 'fusion', 'gammel', 'candy', 'ocean', 'zune', 'carbon', 'umber'

}

These attributes let you set and configure custom chart messages, using text as well as images. These attributes are supported in FusionCharts constructor (FusionCharts({ })).

FusionCharts : {
baseChartMessageFont : String [+] 3.5.0

This attribute allows to set a custom font for all chart messages.

baseChartMessageFontSize : Number [+] 3.5.0

This attribute allows to set a custom font size for all chart messages.

Range: In pixels

baseChartMessageColor : Color [+] 3.5.0

This attribute allows to set a custom font color for all chart messages.

Range: Hex Color Code

baseChartMessageImageHAlign : String [+] 3.7.0

This attribute allows to set a custom horizontal alignment for all images displayed as chart messages.

Default value: middle

Range: left, middle, right

baseChartMessageImageVAlign : String [+] 3.7.0

This attribute allows to set a custom vertical alignment for all images displayed as chart messages.

Default value: middle

Range: top, middle, bottom

baseChartMessageImageAlpha : Number [+] 3.7.0

This attribute allows to set a transparency for all images displayed as chart messages.

Default value: 100

Range: 0 - 100

baseChartMessageImageScale : Number [+] 3.7.0

This attribute allows to set a scale for magnifying all images displayed as chart messages.

Default value: 100

Range: 0-300

loadMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed when a chart begins to load. To display an image as the chart message, prefix I- to the image URL.

loadMessageFont : String [+] 3.5.0

This attribute allows to set the font for the message displayed when a chart begins to load.

Range: Font Name

loadMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed when a chart begins to load.

Range: In pixels

loadMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed when a chart begins to load.

Range: Hex Color Code

loadMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart loadMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

loadMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart loadMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

loadMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart loadMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

loadMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart loadMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

typeNotSupportedMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed when the specified chart type is not supported. To display an image as the chart message, prefix I- to the image URL.

typeNotSupportedMessageFont : String [+] 3.5.0

This attribute allows to set the font for the message displayed when the specified chart type is not supported.

Range: Font Name

typeNotSupportedMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed when the specified chart type is not supported.

Range: In pixels

typeNotSupportedMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed when the specified chart type is not supported.

Range: Hex Color Code

typeNotSupportedMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

typeNotSupportedMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

typeNotSupportedMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

typeNotSupportedMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

renderErrorMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed if an error is encountered while rendering the chart. To display an image as the chart message, prefix I- to the image URL.

renderErrorMessageFont : String [+] 3.5.0

This attribute allows to set a font for the message displayed if an error is encountered while rendering the chart.

Range: Font Name

renderErrorMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed if an error is encountered while rendering the chart.

Range: In pixels

renderErrorMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed if an error is encountered while rendering the chart.

Range: Hex Color Code

renderErrorMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart renderErrorMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

renderErrorMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart renderErrorMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

renderErrorMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart renderErrorMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

renderErrorMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart renderErrorMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

dataLoadStartMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed when chart data begins loading. To display an image as the chart message, prefix I- to the image URL.

dataLoadStartMessageFont : String [+] 3.5.0

This attribute allows to set a font for the message displayed when chart data begins loading.

Range: Font Name

dataLoadStartMessageFontSize : String [+] 3.5.0

This attribute allows to set the font size for the message displayed when chart data begins loading.

Range: In pixels

dataLoadStartMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed when chart data begins loading.

Range: Hex Color Code

dataLoadStartMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

dataLoadStartMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

dataLoadStartMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

dataLoadStartMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

dataEmptyMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed if the data loaded for a chart is empty. To display an image as the chart message, prefix I- to the image URL.

dataEmptyMessageFont : String [+] 3.5.0

This attribute allows to set the font for the message displayed if the data loaded for a chart is empty

Range: Font Name

dataEmptyMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed if the data loaded for a chart is empty.

Range: In pixels

dataEmptyMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed if the data loaded for a chart is empty.

Range: Hex Color Code

dataEmptyMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

dataEmptyMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

dataEmptyMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

dataEmptyMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart dataEmptyMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

dataLoadErrorMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed if an error is encountered while loading chart data. To display an image as the chart message, prefix I- to the image URL.

dataLoadErrorMessageFont : String [+] 3.5.0

This attribute allows to set a font for the message displayed if an error is encountered while loading chart data.

Range: Font Name

dataLoadErrorMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed if an error is encountered while loading chart data.

Range: In pixels

dataLoadErrorMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed if an error is encountered while loading chart data.

Range: Hex Color Code

dataLoadErrorMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

dataLoadErrorMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

dataLoadErrorMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

dataLoadErrorMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

dataInvalidMessage : String [+] 3.7.0

This attribute allows to set the message to be displayed if the data to be loaded for the chart is invalid. To display an image as the chart message, prefix I- to the image URL.

dataInvalidMessageFont : String [+] 3.5.0

This attribute allows to set the font for the message displayed if the specified chart data is invalid.

Range: Font Name

dataInvalidMessageFontSize : Number [+] 3.5.0

This attribute allows to set the font size for the message displayed if the specified chart data is invalid.

Range: In pixels

dataInvalidMessageColor : Color [+] 3.5.0

This attribute allows to set the font color for the message displayed if the specified chart data is invalid.

Range: Hex Color Code

dataInvalidMessageImageHAlign : String [+] 3.7.0

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set a custom horizontal alignment for the image.

Default value: value assigned to the baseChartMessageImageHAlign attribute

Range: left, middle, right

dataInvalidMessageImageVAlign : String [+] 3.7.0

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set a custom vertical alignment for the image.

Default value: value assigned to the baseChartMessageImageVAlign attribute

Range: top, middle, bottom

dataInvalidMessageImageAlpha : Number [+] 3.7.0

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set the transparency of the image.

Default value: 100

Range: 0 - 100

dataInvalidMessageImageScale : Number [+] 3.7.0

If an image is displayed as the chart dataInvalidMessage, this attribute allows to set the scale for magnifying the image.

Default value: 100

Range: 0-300

}
Chart Titles

Using these attributes, you can set the various headings and titles of chart like caption and sub-caption.

chart : {
caption : String [+]

Caption of the chart.

subCaption : String [+]

Sub-caption of the chart.

}
Chart Caption Cosmetics

These attributes let you configure the cosmetics of chart caption and sub-caption.

chart : {
captionAlignment : String [+]

Sets horizontal alignment of caption

Range: "left", "center", "right"

captionOnTop : Boolean [+]

Whether caption should be on top of the data plot area

Range: 0/1

captionFontSize : Number [+]

Sets the caption font size in pixels

Range: 6 - 72

subCaptionFontSize : Number [+]

Sets the sub-caption font size (in pixels)

Range: 6 - 72

captionFont : String [+]

Sets the caption font family

Range: Font Name

subCaptionFont : String [+]

Sets the sub-caption font family

Range: Font Name

captionFontColor : Color [+]

Sets the caption font color

Range: Hex Color Code

subCaptionFontColor : Color [+]

Sets the sub-caption font color

Range: Hex Color Code

captionFontBold : Boolean [+]

Whether the caption font should be displayed in bold

Range: 0/1

subCaptionFontBold : Boolean [+]

Whether the sub caption font should be displayed in bold

Range: 0/1

alignCaptionWithCanvas : Boolean [+]

Whether the caption is aligned with the canvas. Else, it will be aligned with the entire chart area

Range: 0/1

captionHorizontalPadding : Number [+]

If caption is not centre aligned, lets you configure the padding (in pixels) from either edge. Will be ignored if caption is centre aligned.

Range: In Pixels

}
Chart Cosmetics

The following attributes let you configure chart cosmetics like background color, background alpha etc.

chart : {
showBorder : Boolean [+]

Whether to show a border around the chart or not.

Range: 0/1

borderColor : Color [+]

Border color of the chart.

Range: Hex Color Code

borderThickness : Number [+]

Border thickness of the chart.

Range: In Pixels

borderAlpha : Number [+]

Border alpha of the chart.

Range: 0 - 100

bgColor : Color [+]

This attribute sets the background color for the chart. You can set any hex color code as the value of this attribute. To specify a gradient as background color, separate the hex color codes of each color in the gradient using comma. Example: #FF5904, #FFFFFF.

Range: Hex Color Code

bgAlpha : Number [+]

Sets the alpha (transparency) for the background. If you've opted for gradient background, you need to set a list of alpha(s) separated by comma.

Range: 0 - 100

bgRatio : Number [+]

If you've opted for a gradient background, this attribute lets you set the ratio of each color constituent.

Range: 0 - 100

bgAngle : Number [+]

Sets the angle of the background color, in case of a gradient.

Range: 0-360

bgImage : String [+]

To place any image (JPG/PNG/GIF) as background of the chart, enter the (path and) name of the background image. It should be in the same domain as the chart.

bgImageAlpha : Number [+]

This attribute specifies the opacity for the loaded background image.

Range: 0 - 100

bgImageDisplayMode : String [+] 3.2.2

Helps you specify the mode in which the background image is to be displayed. Stretch - expands the image to fit the entire chart area, without maintaining original image constraints. Tile - the image is repeated as a pattern on the entire chart area. Fit - fits the image proportionately on the chart area. Fill -proportionately fills the entire chart area with the image. Center - the image is positioned at the center of the chart area. None - Default mode.

Range: stretch, tile, fit, fill, center, none

bgImageVAlign : String [+] 3.2.2

Helps you to vertically align the background image.

Range: top, middle, bottom

bgImageHAlign : String [+] 3.2.2

Helps you to horizontally align the background image.

Range: left, middle, right

bgImageScale : Number [+] 3.2.2

Helps you magnify the background image.This attribute will only work when the attribute bgImageDisplayMode is set to none, center, or tile.

Range: 0-300

showVLineLabelBorder : Boolean [+]

If you've opted to show a label for any of your vLines in the chart, you can collectively configure whether to show border for all such labels using this attribute. If you want to show label border for just a particular vLine, you can over-ride this value by specifying border configuration for that specific vLine.

Range: 0/1

rotateVLineLabels : Boolean [+]

This attribute lets you set whether the vline labels will show up as rotated labels on the chart.

Default value: 0

Range: 0/1

logoURL : String [+]

You can load an external logo (JPEG/PNG) to your chart, this attribute lets you specify the URL. Due to cross domain security restrictions it is advised to use a logo from the same domain name as your charts.

Range: URL

logoLeftMargin : Number [+]

This attribute helps you set the amount of empty space that you want to put on the left side of your logo image. Nothing is rendered in this space.

Range: In Pixels

logoTopMargin : Number [+]

This attribute helps you set the amount of empty space that you want to put on top of your logo image. Nothing is rendered in this space.

Range: In Pixels

logoPosition : String [+]

Where to position the logo on the chart: TL - Top-left TR - Top-right BR - Bottom right BL - Bottom left CC - Center of screen

Range: TL, TR, BL, BR, CC

logoAlpha : Number [+]

Once the logo has loaded on the chart, you can configure its opacity using this attribute.

Range: 0 - 100

logoScale : Number [+]

You can also change the scale of an externally loaded logo at run-time by specifying a value for this parameter.

Range: 0-300

logoLink : String [+]

If you want to link the logo to an external URL, specify the link in this attribute. The link can be in FusionCharts Link format, allowing you to link to new windows, pop-ups, frames etc.

Range: URL

}
Data Plot Cosmetics

These attributes let you configure how your plot (columns, lines, area, pie or any data that you're plotting) will appear on the chart. If the plots can show borders, you can control the border properties using the attributes listed below. Or, if they support gradient fills, you can again configure various properties of the gradient using these attributes. Various other controls over plot cosmetics can be attained using this set of attributes.

chart : {
showPlotBorder : Boolean [+]

Whether the column, area, pie etc. border will show up.

Range: 0/1

plotBorderColor : Color [+]

Color for column, area, pie border

Range: Hex Color Code

plotBorderThickness : Number [+]

Thickness for column, area, pie border

Range: 0-5

plotBorderAlpha : Number [+]

Alpha for column, area, pie border

Range: 0 - 100

plotFillAlpha : Number [+]

This attribute lets you set the fill alpha for plot.

Range: 0 - 100

use3DLighting : Boolean [+]

Whether to use advanced gradients and shadow effects to create better looking 3D charts.

Range: 0/1

}
Pie / Doughnut Properties

The following attributes let you control various functionalities of pie/doughnut chart.

chart : {
pieRadius : Number [+]

This attribute lets you explicitly set the outer radius of the chart. FusionCharts XT automatically calculates the best fit pie radius for the chart. This attribute is useful if you want to enforce one of your own values. Starting v3.14.0, you can specify the radius of a doughnut chart in both percentage and pixel values.

Range: In Pixels & Percentage

doughnutRadius : Number [+]

This attribute lets you explicitly set the inner radius of the chart. FusionCharts XT automatically calculates the best fit radius for the chart. This attribute is useful if you want to enforce one of your own values. Starting v3.14.0, you can specify the radius of a doughnut chart in both percentage and pixel values.

Range: In Pixels & Percentage

startingAngle : Number [+]

By default, the doughnut chart starts from angle 0 degree i.e., the first doughnut slice starts plotting from 0 degree angle. If you want to change the starting angle of the chart, use this attribute. It obeys the conventions of co-ordinate geometry where 0 degrees means hand of a clock at 3. Starting angle Increases anti-clockwise.

Range: 0-360

enableSlicing : Boolean [+]

This attribute specifies whether slicing of the data plots should be enabled for pie/doughnut charts. Setting this attribute to 1 will enable slicing for the chart, setting it to 0 will disable slicing.

Default value: 1

Range: 0/1

slicingDistance : Number [+]

If you've opted to slice a particular pie/doughnut slice, using this attribute you can control the distance between the slice and the center of chart.

Range: In Pixels

enableRotation : Boolean [+]

The doughnut charts have three modes: Slicing, Rotation, and Link. By default, a chart starts in Slicing mode. If you need to enable rotation from XML, set this attribute to 1. But, when links are defined, the chart always works in Link mode irrespective of the value of this attribute.

Range: 0/1

enableMultiSlicing : Boolean [+]

This attribute specifes whether single-slicing for the data plots should be enabled for pie/doughnut charts. Setting this attribute to 0 will enable single-slicing for the chart, setting it to 1 will enable multi-slicing.

Default value: 1

Range: 0/1

pieYScale : Number [+]

This attribute alters the y-perspective of the pie in percentage figures. 100 percent means the full pie face is visible and 0 percent means only the side face is visible.

Range: 30-80

pieSliceDepth : Number [+]

This attribute controls the pie 3D Depth.

Range: In Pixels

}
Smart Labels & Lines

In FusionCharts XT, the pie and doughnut charts can now have smart labels and lines. Smart labels/lines are data connector lines which connect the pie/doughnut slices to their respective labels without over-lapping even in cases where there are lots of labels located near each other. You can configure the smart labels/lines properties using the attributes below.

chart : {
enableSmartLabels : Boolean [+]

Whether to use smart labels or not.

Range: 0/1

skipOverlapLabels : Boolean [+]

Whether to skip labels that are overlapping even when using smart labels. If not, they might overlap if there are too many labels.

Range: 0/1

isSmartLineSlanted : Boolean [+]

The smart lines (smart label connector lines) can appear in two ways: Slanted or Straight. This attribute lets you choose between them.

Range: 0/1

smartLineColor : Color [+]

Color of smart label connector lines.

Range: Hex Color Code

smartLineThickness : Number [+]

Thickness of smart label connector lines.

Range: In Pixels

smartLineAlpha : Number [+]

Alpha of smart label connector lines.

Range: 0 - 100

labelDistance : Number [+]

This attribute helps you set the distance of the label/value text boxes from the pie/doughnut edge.

Range: In Pixels

manageLabelOverflow : Boolean [+]

This attribute tries to manage overflow of data labels. If enabled, data labels are either wrapped or truncated with ellipses to prevent them from overflowing out of the chart canvas. In case smartLabels is disabled, the labels are wrapped to avoid the overflow. Since smartLabels is disabled, the wrapped labels might get overlapped. When smartLabels is enabled, management of the overflowing labels fit in the "quadrant specific smart labeling algorithm". Data labels try to wrap first. In case, there is a space constraint in the quadrant, the labels get truncated with ellipses.

Range: 0/1

useEllipsesWhenOverflow : Boolean [+] 3.2.1

When enabled, long data labels are truncated by adding ellipses to prevent them from overflowing the chart background. The default value is 1. This setting works only when manageLabelOverflow is set to 1.

Range: 0/1

}
Number Formatting

FusionCharts XT offers you a lot of options to format your numbers on the chart. Using the attributes below, you can control a myriad of options like: Formatting of commas and decimals Number prefixes and suffixes Decimal places to which the numbers will round to Scaling of numbers based on a user defined scale Custom number input formats

chart : {
formatNumber : Boolean [+]

This configuration determines whether the numbers displayed on the chart will be formatted using commas, e.g., 40,000 if 'formatNumber': '1'; and 40000 if 'formatNumber': '0';.

Range: 0/1

formatNumberScale : Boolean [+]

Configuration whether to add K (thousands) and M (millions) to a number after truncating and rounding it - e.g., if formatNumberScale is set to 1, 1043 will become 1.04K (with decimals set to 2 places). Same with numbers in millions - an M will be added at the end.

Range: 0/1

defaultNumberScale : String [+]

The default unit of the numbers that you're providing to the chart.

numberScaleUnit : String [+]

Unit of each block of the scale.

numberScaleValue : String [+]

Range of the various blocks that constitute the scale.

forceNumberScale : Boolean [+] 3.9.0

If a data value is less than the lowest given number is the number scale, this attribute forces the lower value of the numberScaleUnit to be applied to that data value. This attribute works only when “formatNumberScale”: “1” and the defaultNumberScale attribute is not defined.

For example, if “numberScaleUnit”: “K, M”, “numberScaleValue”: “1000, 1000”, and “forceNumberScale”: “1”, a data value of 400 will be rendered as 0.40K.

Range: 0/1

scaleRecursively : Boolean [+] 3.2.2 - SR3

Whether recursive scaling should be applied.

Range: 0/1

maxScaleRecursion : Number [+] 3.2.2 - SR3

How many recursions to complete during recursive scaling? -1 completes the entire set of recursion.

scaleSeparator : String [+] 3.2.2 - SR3

What character to use to separate the scales that are generated after recursion?

numberPrefix : String [+]

Using this attribute, you could add prefix to all the numbers visible on the graph. For example, to represent all dollars figure on the chart, you could specify this attribute to $ to show like $40000, $50000.

Range: Character

numberSuffix : String [+]

Using this attribute, you could add a suffix to all the numbers visible on the graph. For example, to represent all figures quantified as per annum on the chart, you could specify this attribute to '/a' to show like 40000/a, 50000/a.

Range: Character

decimalSeparator : String [+]

This attribute helps you specify the character to be used as the decimal separator in a number.

Range: Character

thousandSeparator : String [+]

This attribute helps you specify the character to be used as the thousands separator in a number.

Range: Character

thousandSeparatorPosition : Number [+] 3.2.2 - SR3

This option helps you specify the position of the thousand separator.

Range:  

inDecimalSeparator : String [+]

In some countries, commas are used as decimal separators and dots as thousand separators. In XML, if you specify such values, it will give an error while converting to number. So, FusionCharts XT accepts the input decimal and thousand separator from user, so that it can convert it accordingly into the required format. This attribute lets you input the decimal separator.

Range: Character

inThousandSeparator : String [+]

In some countries, commas are used as decimal separators and dots as thousand separators. In XML, if you specify such values, it will give an error while converting to number. So, FusionCharts XT accepts the input decimal and thousand separator from user, so that it can convert it accordingly into the required format. This attribute lets you input the thousand separator.

Range: Character

decimals : Number [+]

Number of decimal places to which all numbers on the chart will be rounded to.

Range: 0-10

forceDecimals : Boolean [+]

Whether to add 0 padding at the end of decimal numbers. For example, if you set decimals as 2 and a number is 23.4. If forceDecimals is set to 1, FusionCharts XT will convert the number to 23.40 (note the extra 0 at the end).

Range: 0/1

}
Font Properties

Using the attributes below, you can define the generic font properties for all the text on the chart. These attributes allow you a high level control over font properties. If you intend to specify font properties for individual chart elements (like Caption, sub-caption etc.), you'll need to use the Styles feature of FusionCharts XT. Using Styles, you can also specify advanced font properties like Bold, Italics, HTML Mode etc.

chart : {
baseFont : String [+]

This attribute lets you set the font face (family) of all the text (data labels, values etc.) on chart.

Range: Font Name

baseFontSize : Number [+]

This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font size provided here.

Range: 6 - 72

baseFontColor : Color [+]

This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font color provided here.

Range: Hex Color Code

}
Data Label Cosmetics

These attributes let you configure the cosmetics of all data labels of the chart.

chart : {
labelFont : String [+] 3.5.0

Sets the x-axis label font family for the text.

Range: Font Name

labelFontColor : Color [+] 3.5.0

Sets the x-axis label font color.

Range: Hex Color Code

labelFontSize : Number [+] 3.5.0

Specifies the x-axis label font size.

Range: 6 - 72

labelFontBold : Boolean [+] 3.5.0

Flag indicating whether x-axis label font should be bold or not.

Range: 0/1

labelFontItalic : Boolean [+] 3.5.0

Flag indicating whether x-axis label font should be italicized or not.

Range: 0/1

labelBgColor : Color [+] 3.5.0

Sets the background color for x-axis label text.

Range: Hex Color Code

labelBorderColor : Color [+] 3.5.0

Sets the color of the border around the x-axis label text.

Range: Hex Color Code

labelAlpha : Number [+] 3.5.0

Sets the x-axis label alpha for both font and background.

Range: 0 - 100

labelBgAlpha : Number [+] 3.5.0

Sets the x-axis label background alpha.

Range: 0 - 100

labelBorderAlpha : Number [+] 3.5.0

Sets the x-axis label border alpha.

Range: 0 - 100

labelBorderPadding : Number [+] 3.5.0

Sets the x-axis label border padding.

Range: In Pixels

labelBorderRadius : Number [+] 3.5.0

Sets the x-axis label border radius.

Range: In Pixels

labelBorderThickness : Number [+] 3.5.0

Sets the x-axis label border thickness.

Range: In Pixels

labelBorderDashed : Boolean [+] 3.5.0

Whether the border around x-axis labels should be rendered using dashed lines.

Default value: 0 (border rendered using straight lines)

Range: 0/1

labelBorderDashLen : Number [+] 3.5.0

Sets the length of each dash when the border around the x-axis labels are rendered using dashed lines.

Range: In pixels

labelBorderDashGap : Number [+] 3.5.0

Sets the gap between two consecutive dashes when the border around x-axis labels are rendered using dashed lines.

Range: In pixels

labelLink : URL [+] 3.5.0

Sets a link for every data plot labels.

}
Legend Properties

In pie / doughnut charts, the name of each slice shows up in the legend of the chart. If you do not need the legend, you can opt to hide the same. Also, the legend can be placed at the bottom of the chart or to the right of the chart. Using the attributes below, you can configure the functional and cosmetic properties of the legend.

chart : {
showLegend : Boolean [+] 3.2

Whether to show legend for the chart (only multi-series and combination charts).

Range: 0/1

legendItemFontBold : Boolean [+]

Whether legend keys should be displayed in bold

Range: 0/1

legendItemFont : String [+]

Sets legend item font

Range: Font Name

legendItemFontSize : Number [+]

Sets legend item font size

Range: 6 - 72

legendItemFontColor : Color [+]

Sets legend item font color

Range: Hex Color Code

legendItemHoverFontColor : Color [+]

Sets legend item font color on hover

Range: Hex Color Code

legendPosition : String [+] 3.2

The legend can be plotted at two positions on the chart - below (BOTTOM) the chart and to the right (RIGHT) of the chart.

Range: BOTTOM or RIGHT

legendCaptionAlignment : String [+]

Sets the legend caption horizontal alignment .

Range: "left", "center", "right"

legendCaptionFontBold : Boolean [+]

Whether legend caption should be displayed in bold

Range: 0/1

legendCaptionFont : String [+]

Sets legend caption font

Range: Font Name

legendCaptionFontSize : Number [+]

Sets legend caption font size

Range: 6 - 72

legendCaptionFontColor : Color [+]

Sets legend caption font color

Range: Hex Color Code

legendCaption : String [+] 3.2

You can add a caption for the entire legend by setting the same here.

Range:  

legendItemHiddenColor : Color [+]

Sets the color that applies on both text font and icon when they are in a disabled / hidden state

Range: Hex Color Code

legendIconScale : Number [+] 3.2

Scaling of legend icon is possible in FusionCharts XT. This attribute lets you control the size of the legend icon. The default scale value is 1. Anything less than 1 reduces the size of the legend-icons on the chart. Any value bigger than 1 enlarges the icons. e.g., 0.5 means half the size, where as, 2 means twice the size.

Range: 1-5

legendBgColor : Color [+] 3.2

Background color for the legend.

Range: Hex Color Code

legendBgAlpha : Number [+] 3.2

Background alpha for the legend.

Range: 0 - 100

legendBorderColor : Color [+] 3.2

Border Color for the legend.

Range: Hex Color Code

legendBorderThickness : Number [+] 3.2

Border thickness for the legend.

Range: In Pixels

legendBorderAlpha : Number [+] 3.2

Border alpha for the legend.

Range: 0 - 100

legendShadow : Boolean [+] 3.2

Whether to show a shadow for legend.

Range: 0/1

legendAllowDrag : Boolean [+] 3.2

The legend can be made drag-able by setting this attribute to 1. End viewers of the chart can drag the legend around on the chart.

Range: 0/1

legendScrollBgColor : Color [+] 3.2

If you've too many items on the legend, a scroll bar shows up on the same. This attribute lets you configure the background color of the scroll bar.

Range: Hex Color Code

reverseLegend : Boolean [+] 3.2

You can reverse the ordering of datasets in the legend by setting this attribute to 1.

Range: 0/1

interactiveLegend : Boolean [+] 3.2

This attribute lets you interact with the legend in your chart. When you click a particular legend key, the associated slice slides out from the chart. Re-clicking the key causes the slice to slide in.

Range: 0/1

legendNumColumns : Number [+] 3.2

The legend items are arranged in columns. Using this attribute, you can propose the number of columns. This value undergoes internal checking on judicious use of white-space. In case, the value is found improper, the chart auto-calculates the number of columns. When set to 0, the chart automatically decides the number of columns. The above is applicable when legendPosition is set to BOTTOM. If you have set RIGHT legendPosition, the number of columns is always set to 1.

Range: Zero and Positive Integers

minimiseWrappingInLegend : Boolean [+] 3.2

Whether to minimize legend item text wrapping.

Range: 0/1

drawCustomLegendIcon : Boolean [+] 3.8.0

Specifies whether drawing a custom legend icon will be enabled. All legend icon customization attributes will work only if this feature is enabled.

Default value: 0 (disabled)

Range: 0/1

legendIconBorderColor : Color [+] 3.8.0

Sets the border color for the legend icon.

Default value: Data plot border color

Range: Hex Color Code

legendIconBgColor : Color [+] 3.8.0

Sets the background color for the legend icon.

Default value: Data plot fill color

Range: Hex Color Code

legendIconAlpha : Number [+] 3.8.0

Sets the legend icon transparency.

Default value: 100

Range: 0 - 100

legendIconBgAlpha : Number [+] 3.8.0

Sets the legend icon background transparency.

Default value: 100

Range: 0 - 100

legendIconSides : Number [+] 3.8.0

Sets the number of sides for the legend icon.

Default value: 4

legendIconBorderThickness : Number [+] 3.8.0

Sets the thickness of the legend icon border.

Default value: 1

Range: 1-5

legendIconStartAngle : Number [+] 3.8.0

Sets the starting angle of for drawing the legend icon.

Default value: 45

alignLegendWithCanvas : Boolean [+] 3.10.0

This attribute if set to 0, the legend box will be center aligned with respect to the entire width of the chart only if the total width of the legend box is more than the canvas width. By default, the legend box is center aligned with respect to the canvas width and it remains the same if the width of the legend box is less than the canvas width.

Range: 0/1

}
Tooltip Attributes

These attributes let you control the tool tip. You can set the background color, border color, separator character and few other details.

chart : {
showToolTip : Boolean [+]

Whether to show tool tip on chart.

Range: 0/1

toolTipBgColor : Color [+]

Background color for tool tip.

Range: Hex Color Code

toolTipColor : Color [+]

Font color for the tool-tip.

Range: Hex Color Code

toolTipBorderColor : Color [+]

Border color for tool tip.

Range: Hex Color Code

tooltipBorderAlpha : Number [+]

Sets the border transparency for tool tip.

Range: 0 - 100

toolTipSepChar : String [+]

The character specified as the value of this attribute separates the name and value displayed in tool tip.

showToolTipShadow : Boolean [+]

Whether to show shadow for tool-tips on the chart.

Range: 0/1

tooltipbgalpha : Number [+]

Sets the transparency of the tooltip.

Range: 0 - 100

tooltipborderradius : Number [+]

Sets the border radius of the tooltip.

Range: In Pixels

tooltipborderthickness : Number [+]

Sets the border thickness of the tooltip.

Range: In Pixels

toolTipPadding : Number [+]

This attribute sets the vertical space between the value and the border of the tooltip. If you want more space between the value and the border, you can use this attribute to control it.

Range: In Pixels

plottooltext : String [+]

Specify custom text for the tooltip

You can either specify a constant string as the tooltip text or you can use variable values from the data level by prefixing a $ to the attribute name, for example, $name, $value.

}
Toolbar Attributes

Using this set of attributes, you can customize the toolbar on the chart. The advantage of having a toolbar is that it manages all the UI action elements (context menus, checkboxes, buttons) centrally. This provides a clean, uniform look and a better, more meaningful and logical grouping.

chart : {
toolbarPosition : String [+] 3.11.3

Where to position the toolbar on the chart: TL - Top-left TR - Top-right BR - Bottom right BL - Bottom left CC - Center of screen

Range: TL, TR, BL, BR, CC

toolbarX : Number [+] 3.11.3

Sets the toolbox position on the chart with respect to x-axis.

toolbarY : Number [+] 3.11.3

Sets the toolbox position on the chart with respect to y-axis.

toolbarHAlign : String [+] 3.11.3

Sets the horizontal alignment of the toolbar on the chart.

Range: Left, Right

toolbarVAlign : String [+] 3.11.3

Sets the vertical alignment of the toolbar on the chart

Range: Top, Bottom

toolbarButtonColor : Color [+]

Sets the color of the toolbar buttons.

Range: Any (color code without the # prefix)

showToolBarButtonTooltext : Boolean [+]

Enables/disables display of tooltips for toolbar buttons.

Range: 0/1

toolbarButtonScale : Number [+]

You can change the scale of the toolbar by specifying a value for this attribute.

}
Attributes for Exporting Charts

These attributes allow you to control the saving of chart as image, SVG or XLSX.

chart : {
exportEnabled : Boolean [+]

Whether the chart will allow exporting to images, PDFs, SVG, XLSX or CSV format.

Default value: 0

Range: 0/1

exportAction : String [+]

In case of server-side exporting, the action specifies whether the exported image will be sent back to client as download, or whether it'll be saved on the server.

Default value: download

Range: 'save' or 'download'

exportHandler : String [+]

In case of server side exporting, this refers to the path of the server-side export handler (the ready-to-use scripts that we provide).

exportFormats : String [+]

Lets you configure what output formats to allow for export of chart, in the export context menu, and also customize the label for each menu item. The attribute value should be a pipe (|) delimited separated key-value pair. Example: exportFormats: 'PNG=Export as High Quality Image&#124;JPG&#124;PDF=Export as PDF File'

exportMode : String [+] 3.12.1

This attributes sets the modes of export. To enable client-side exporting, set this attribute to client.

Default value: auto.

Note: Starting v3.12.1, the exportMode attribute replaces the exportAtClientSide attribute. However, you don’t need to make any changes to the existing setup because, the FusionCharts library comes with the proper mapping already provided.

exportShowMenuItem : Boolean [+]

Whether the menu items related to export (e.g., Save as JPEG etc.) will appear in the context menu of chart.

Range: 0/1

exportTargetWindow : String [+]

In case of server-side exporting and when using download as action, this lefts you configure whether the return image, PDF, SVG or XLSX will open in same window (as an attachment for download), or whether it will open in a new window.

Default value: _self

Range: '_self' or '_blank'

exportFileName : String [+]

Using this attribute you can specify the name (excluding the extension) of the output (export) file.

}
Data Plot Hover Effects

If you wish to show an effect on the data plot (column, line anchor, pie etc.) when the user hovers his mouse over the data plot, these attributes let you configure the cosmetics of the hover for all data plots in the chart.

chart : {
showHoverEffect : Boolean [+]

Whether to enable hover effect on charts for all elements

Range: 0/1

plotHoverEffect : Boolean [+]

Whether to enable hover effect on charts for data plots (e.g., column, pie) only

Range: 0/1

plotFillHoverColor : Color [+]

Specifies the hover color for the data plots

Range: Hex Color Code

plotFillHoverAlpha : Number [+]

Specifies the hover alpha for data plots

Range: 1 - 100

plotBorderHoverColor : Color [+]

This attribute sets the border color of the plot when hovered.

Range: Hex color code

plotBorderHoverAlpha : Number [+]

This attribute sets the transparency of plot border when hovered.

Range: 0 - 100

plotBorderHoverThickness : Number [+]

Sets the thickness of the border of plot when hovered.

Range: In pixels

}
Chart Padding & Margins

The following attributes help you control chart margins and paddings. FusionCharts Suite XT allows you to manually customize the padding of various elements on the chart to allow advanced manipulation and control over chart visualization. You can also define the chart margins. Chart Margins refer to the empty space left on the top, bottom, left and right of the chart. That means, FusionCharts Suite XT will not plot anything in that space. It's not necessary for you to specify any padding/margin values. FusionCharts Suite XT automatically assumes the best values for the same, if you do not specify the same.

chart : {
captionPadding : Number [+]

This attribute lets you control the space (in pixels) between the sub-caption and top of the doughnut. If the sub-caption is not defined, it controls the space between caption and top of the doughnut. If neither caption, nor sub-caption is defined, this padding does not come into play.

Range: In Pixels

chartLeftMargin : Number [+]

Amount of empty space that you want to put on the left side of your chart. Nothing is rendered in this space.

Range: In Pixels

chartRightMargin : Number [+]

Amount of empty space that you want to put on the right side of your chart. Nothing is rendered in this space.

Range: In Pixels

chartTopMargin : Number [+]

Amount of empty space that you want to put on the top of your chart. Nothing is rendered in this space.

Range: In Pixels

chartBottomMargin : Number [+]

Amount of empty space that you want to put at the bottom of your chart. Nothing is rendered in this space.

Range: In Pixels

}
The data Object

In single-series charts, each instance of the data object represents a data value to be plotted on the chart. For a single-series chart, one instance of the data object looks as shown in the example below:


"data"[{
        "label": "Jan",
        "value": "10000"
    }]

Attributes of the data object are used to set and configure the data values for the chart.

data : {
borderColor : Color [+]

If you want to set border color of individual pie/doughnut data items, you can specify using this attribute.

Range: Hex Color Code

color : Color [+]

If you want to define your own colors for the data items on chart, use this attribute to specify color for the data item.

Range: Hex Color Code

displayValue : String [+]

If instead of the numerical value of this data, you wish to display a custom string value, you can specify the same here. Examples are annotation for a data item etc.

Range:  

isSliced : Boolean [+]

This attribute determines whether a pie slice appears as a part of the total chart or is sliced out as an individual item.

Range: 0/1

label : String [+]

This attribute determines the label for the data item. The label appears on the x-axis of chart.

Note: The label attribute replaces the name attribute. Previously, either one of the attributes could be used to set the label. Support for the name attribute has been discontinued since v3.10.0.

link : String [+]

You can define links for individual data items. That enables the end user to click on data items (columns, lines, bars etc.) and drill down to other pages. To define the link for data items, use the link attribute. You can define links that open in same window, new window, pop-up window or frames. Please see "Drill-Down > Using JavaScript Functions as Links" for more information. Also, you'll need to Url Encode all the special characters (like ? and &) present in the link.

showLabel : Boolean [+] 3.2.2 - SR5

You can individually opt to show/hide labels of individual data items using this attribute.

Range: 0/1

showValue : Boolean [+]

You can individually opt to show/hide values of individual data items using this attribute.

Range: 0/1

toolText : String [+]

By default, FusionCharts XT shows the data item name and value as tool tip text for that data item. But, if you want to display more information for the data item as tool tip, you can use this attribute to specify the same.

value : Number [+]

Numerical value for the data item. This value will be plotted on the chart.

labelFont : String [+] 3.5.0

Sets the x-axis label font family for the text.

Range: Font Name

labelFontColor : Color [+] 3.5.0

Sets the x-axis label font color.

Range: Hex Color Code

labelFontSize : Number [+] 3.5.0

Specifies the x-axis label font size.

Range: 6 - 72

labelFontBold : Boolean [+] 3.5.0

Flag indicating whether x-axis label font should be bold or not.

Range: 0/1

labelFontItalic : Boolean [+] 3.5.0

Flag indicating whether x-axis label font should be italicized or not.

Range: 0/1

labelBgColor : Color [+] 3.5.0

Sets the background color for x-axis label text.

Range: Hex Color Code

labelBorderColor : Color [+] 3.5.0

Sets the color of the border around the x-axis label text.

Range: Hex Color Code

labelAlpha : Number [+] 3.5.0

Sets the x-axis label alpha for both font and background.

Range: 0 - 100

labelBgAlpha : Number [+] 3.5.0

Sets the x-axis label background alpha.

Range: 0 - 100

labelBorderAlpha : Number [+] 3.5.0

Sets the x-axis label border alpha.

Range: 0 - 100

labelBorderPadding : Number [+] 3.5.0

Sets the x-axis label border padding.

Range: In Pixels

labelBorderRadius : Number [+] 3.5.0

Sets the x-axis label border radius.

Range: In Pixels

labelBorderThickness : Number [+] 3.5.0

Sets the x-axis label border thickness.

Range: In Pixels

labelBorderDashed : Boolean [+] 3.5.0

Whether the border around x-axis labels should be rendered using dashed lines.

Default value: 0 (border rendered using straight lines)

Range: 0/1

labelBorderDashLen : Number [+] 3.5.0

Sets the length of each dash when the border around the x-axis label is rendered using dashed lines.

Range: In pixels

labelBorderDashGap : Number [+] 3.5.0

Sets the gap between two consecutive dashes when the border around x-axis label is rendered using dashed lines.

Range: In pixels

labelLink : URL [+] 3.5.0

Sets the link for each individual data plot label.

hoverColor : Color [+]

This attribute can set the hover color for a particular data plot.

Range: Hex Color Code

hoverAlpha : Number [+]

This attribute sets the transparency for a particular data plot when hovered.

Range: 0 - 100

borderHoverColor : Color [+]

This attribute sets the border color of the data plot on hover.

Range: Hex Color Code

borderHoverAlpha : Number [+]

This attribute sets the border's transparency for the data plot on hover.

Range: 0 - 100

borderHoverThickness : Number [+]

This attribute sets the thickness for the data plot's border on hover.

Range: In pixels

}