Chart Attributes
- a
- b
- c
- d
- e
- f
- g
- h
- i
- j
- k
- l
- m
- n
- o
- p
- q
- r
- s
- t
- u
- v
- w
- x
- y
- z
- Area 2D
- Bar 2D
- Bar 3D
- Box and Whisker 2D
- Bubble Chart
- Candlestick Chart
- Chord
- Column 2D
- Column 3D
- Doughnut 2D
- Doughnut 3D
- Drag Node Chart
- Drag-able Area 2D Chart
- Drag-able Column 2D Chart
- Drag-able Line 2D Chart
- Error Bar Chart
- Error Line 2D Chart
- Error Scatter Chart
- Funnel Chart
- Gantt Chart
- Heat Map Chart
- Horizontal Bullet Graph
- Horizontal LED
- Inverse Y-axis Area Chart
- Inverse Y-axis Column 2D Chart
- Inverse Y-axis Line 2D Chart
- Kagi Chart
- Line 2D
- Logarithmic Column 2D Chart
- Logarithmic Line 2D Chart
- Marimekko
- Multi-axis Line Chart
- Multi-level Pie Chart
- Multi-series 2D Dual Y Combination Chart (Column + Line + Area + Spline)
- Multi-series 2D Single Y Combination Chart (Column + Line + Area + Spline)
- Multi-series 3D Dual Y Combination Chart (Column + Line + Area + Spline)
- Multi-series 3D Single Y Combination Chart (Column + Line + Area + Spline)
- Multi-series Area 2D
- Multi-series Bar 2D
- Multi-series Bar 3D
- Multi-series Column 2D
- Multi-series Column 3D
- Multi-series Column 3D + Line Dual Y Axis
- Multi-series Column 3D + Line Single Y-axis
- Multi-series Line 2D
- Multi-series Spline
- Multi-series Spline Area
- Multi-series Stacked Column 2D
- Multi-series Stacked Column 2D + Line Dual Y Axis
- Overlapped Column 2D
- Overlapped Bar 2D
- Pareto 2D
- Pareto 3D
- Pie 2D
- Pie 3D
- Pyramid Chart
- Radar Chart
- Real-time Angular
- Real-time Area
- Real-time Bulb
- Real-time Column
- Real-time Cylinder
- Real-time Horizontal Linear
- Real-time Line
- Real-time Line (Dual Y)
- Real-time Stacked Area
- Real-time Stacked Column
- Real-time Thermometer
- Sankey Diagram
- Scatter Chart
- Scroll Area 2D
- Scroll Bar 2D
- Scroll Column 2D
- Scroll Combination 2D (Dual Y)
- Scroll Combination 2D (Single Y)
- Scroll Line 2D
- Scroll Multi-series Stacked Column 2D
- Scroll Multi-series Stacked Column 2D + Line (Dual Y)
- Scroll Stacked Bar 2D
- Scroll Stacked Column 2D
- Select-scatter Chart
- Single-series Spline 2D
- Single-series Spline Area 2D
- Spark Column
- Spark Line
- Spark Win/Loss
- Stacked 2D Column + Line Single Y-axis
- Stacked 3D Column + Line Single Y-axis
- Stacked Area 2D
- Stacked Area 2D Line Dual Y-axis Chart
- Stacked Bar 2D
- Stacked Bar 3D
- Stacked Column 2D
- Stacked Column 2D Line Dual Y-axis Chart
- Stacked Column 3D
- Stacked Column 3D + Line Dual Y Axis
- Step Line Charts
- Sunburst
- Tree Map Chart
- Vertical Bullet Graph
- Vertical LED
- Waterfall / Cascade Chart
- Zoom Line
- Zoom Line Dual Y-axis
- Zoom Scatter
- json
- xml
{
"chart": {
"caption": "Revenue, Profits & Number of employees",
"drawcrossline": "1",
"yaxisname": "Revenue / Profit (in $)",
"syaxisname": "Number of employees",
"showvalues": "0",
"showanchors": "0",
"numberprefix": "$",
"plothighlighteffect": "fadeout",
"theme": "fusion"
},
"categories": [
{
"category": [
{
"label": "Mar-2012"
},
{
"label": "Jun-2012"
},
{
"label": "Sept-2012"
},
{
"label": "Dec-2012"
},
{
"label": "Mar-2013"
},
{
"label": "Jun-2013"
},
{
"label": "Sept-2013"
},
{
"label": "Dec-2013"
},
{
"label": "Mar-2014"
},
{
"label": "Jun-2014"
},
{
"label": "Sept-2014"
},
{
"label": "Dec-2014"
},
{
"label": "Mar-2015"
},
{
"label": "Jun-2015"
},
{
"label": "Sept-2015"
},
{
"label": "Dec-2015"
},
{
"label": "Mar-2016"
},
{
"label": "Jun-2016"
},
{
"label": "Sept-2016"
},
{
"label": "Dec-2016"
},
{
"label": "Mar-2017"
},
{
"label": "Jun-2017"
}
]
}
],
"dataset": [
{
"seriesname": "Revenue",
"plottooltext": "Revenue in $label : <b>$dataValue</b>",
"data": [
{
"value": "36000"
},
{
"value": "22000"
},
{
"value": "24000"
},
{
"value": "42000"
},
{
"value": "35000"
},
{
"value": "21000"
},
{
"value": "26000"
},
{
"value": "28000"
},
{
"value": "47000"
},
{
"value": "38000"
},
{
"value": "29000"
},
{
"value": "23000"
},
{
"value": "24000"
},
{
"value": "42000"
},
{
"value": "35000"
},
{
"value": "21000"
},
{
"value": "26000"
},
{
"value": "28000"
},
{
"value": "47000"
},
{
"value": "38000"
},
{
"value": "29000"
},
{
"value": "23000"
}
]
},
{
"seriesname": "Profit",
"plottooltext": "Profit in $label : <b>$dataValue</b>",
"renderas": "area",
"showvalues": "0",
"data": [
{
"value": "4000"
},
{
"value": "5000"
},
{
"value": "3000"
},
{
"value": "4000"
},
{
"value": "1000"
},
{
"value": "7000"
},
{
"value": "1000"
},
{
"value": "4000"
},
{
"value": "1000"
},
{
"value": "6000"
},
{
"value": "2000"
},
{
"value": "7000"
},
{
"value": "6000"
},
{
"value": "8000"
},
{
"value": "10000"
},
{
"value": "7000"
},
{
"value": "8000"
},
{
"value": "4000"
},
{
"value": "9000"
},
{
"value": "6000"
},
{
"value": "6000"
},
{
"value": "7000"
}
]
},
{
"seriesname": "Number of Employees",
"parentyaxis": "S",
"renderas": "line",
"showvalues": "0",
"plottooltext": "$value employees",
"data": [
{
"value": "31"
},
{
"value": "25"
},
{
"value": "35"
},
{
"value": "29"
},
{
"value": "25"
},
{
"value": "23"
},
{
"value": "26"
},
{
"value": "25"
},
{
"value": "25"
},
{
"value": "35"
},
{
"value": "20"
},
{
"value": "30"
},
{
"value": "46"
},
{
"value": "34"
},
{
"value": "26"
},
{
"value": "33"
},
{
"value": "46"
},
{
"value": "25"
},
{
"value": "35"
},
{
"value": "28"
},
{
"value": "20"
},
{
"value": "43"
}
]
}
]
}<chart caption="Revenue, Profits & Number of employees" drawcrossline="1" yaxisname="Revenue / Profit (in $)" syaxisname="Number of employees" showvalues="0" showanchors="0" numberprefix="$" plothighlighteffect="fadeout" theme="fusion">
<categories>
<category label="Mar-2012" />
<category label="Jun-2012" />
<category label="Sept-2012" />
<category label="Dec-2012" />
<category label="Mar-2013" />
<category label="Jun-2013" />
<category label="Sept-2013" />
<category label="Dec-2013" />
<category label="Mar-2014" />
<category label="Jun-2014" />
<category label="Sept-2014" />
<category label="Dec-2014" />
<category label="Mar-2015" />
<category label="Jun-2015" />
<category label="Sept-2015" />
<category label="Dec-2015" />
<category label="Mar-2016" />
<category label="Jun-2016" />
<category label="Sept-2016" />
<category label="Dec-2016" />
<category label="Mar-2017" />
<category label="Jun-2017" />
</categories>
<dataset seriesname="Revenue" plottooltext="Revenue in $label : <b>$dataValue</b>">
<set value="36000" />
<set value="22000" />
<set value="24000" />
<set value="42000" />
<set value="35000" />
<set value="21000" />
<set value="26000" />
<set value="28000" />
<set value="47000" />
<set value="38000" />
<set value="29000" />
<set value="23000" />
<set value="24000" />
<set value="42000" />
<set value="35000" />
<set value="21000" />
<set value="26000" />
<set value="28000" />
<set value="47000" />
<set value="38000" />
<set value="29000" />
<set value="23000" />
</dataset>
<dataset seriesname="Profit" plottooltext="Profit in $label : <b>$dataValue</b>" renderas="area" showvalues="0">
<set value="4000" />
<set value="5000" />
<set value="3000" />
<set value="4000" />
<set value="1000" />
<set value="7000" />
<set value="1000" />
<set value="4000" />
<set value="1000" />
<set value="6000" />
<set value="2000" />
<set value="7000" />
<set value="6000" />
<set value="8000" />
<set value="10000" />
<set value="7000" />
<set value="8000" />
<set value="4000" />
<set value="9000" />
<set value="6000" />
<set value="6000" />
<set value="7000" />
</dataset>
<dataset seriesname="Number of Employees" parentyaxis="S" renderas="line" showvalues="0" plottooltext="$value employees">
<set value="31" />
<set value="25" />
<set value="35" />
<set value="29" />
<set value="25" />
<set value="23" />
<set value="26" />
<set value="25" />
<set value="25" />
<set value="35" />
<set value="20" />
<set value="30" />
<set value="46" />
<set value="34" />
<set value="26" />
<set value="33" />
<set value="46" />
<set value="25" />
<set value="35" />
<set value="28" />
<set value="20" />
<set value="43" />
</dataset>
</chart>Chart Atributes
Functional Attributes
These attributes let you control a variety of functional elements on the chart. For example, you can opt to show/hide data labels, data values. You can also set chart limits and extended properties.
This attribute gives you the option to control animation in your charts. If you do not want to animate any part of the chart, set this as 0. By default,animation` is set to 1.
Range: 0/1
This attribute sets the animation duration of the chart. animationDuration attribute is applicable only if animation of the chart is enabled.
Default value: 1 sec
Range: In seconds
This attribute enables you to set whether the initial animation of the 3D elements in chart canvas will occur or not. If set to 0, it will also set off chart canvas' rotation while using JavaScript API functions like view2D(), resetView(), rotateView().The view will be updated instantly without any rotation or animation.
Range: 0/1
It sets the time in seconds (can accept decimals) that the 3D elements of the chart take to animate when the chart is rendered initially. This attribute also sets the time that the chart canvas will take to animate when the chart is transformed to any view (View3D, View 2D, Reset View) using context menu (right click menu). This is also applicable while using JavaScript API functions - view2D(), view3D, resetView() or rotateView(). Default value is 0.5.
Range: 0.00 - 10.00
FusionCharts XT uses the concept of Color Palettes. Each chart has 5 pre-defined color palettes which you can choose from. Each palette renders the chart in a different color theme.
Range: 1-5
While the palette attribute allows to select a palette theme that applies to chart background, canvas, font and tool-tips, it does not change the colors of data items (i.e., column, line, pie etc.). Using paletteColors attribute, you can specify your custom list of hex colors for the data items. The list of colors have to be separated by comma e.g., "paletteColors": "#FF0000, #0372AB, #FF5904...". The chart will cycle through the list of specified colors and then render the data plot accordingly. To use the same set of colors throughout all your charts in a web application, you can store the list of palette colors in your application globally and then provide the same in each chart JSON.
Range: List of hex color codes separated by comma
This attribute lets you control whether empty data sets in your data will be connected to each other OR do they appear as broken data sets.
Range: 0/1
If you've both area and column plots on the combination chart, this attribute lets you configure whether area chart will appear over column chart.
Range: 0/1
It sets the configuration whether the x-axis labels will be displayed or not.
Range: 0/1
This attribute can be used to set the maximum height for the x-axis labels (data labels) excluding the x-axis title. If any label goes beyond this height, the label will be truncated. In stagger mode, the number of stagger lines will be reduced if they exceed this value.
Range: In Pixels
Using this attribute, you can customize the alignment of data labels (x-axis labels). There are 5 options: AUTO, WRAP, STAGGER, ROTATE or NONE. By default, this attribute is set to AUTO mode which means that the alignment of the data labels is determined automatically depending on the size of the chart. WRAP wraps the label text if it is too long to fit in one line. ROTATE rotates the labels vertically. STAGGER divides the labels into multiple lines.
Range: 'AUTO', 'WRAP', 'STAGGER', 'ROTATE', 'NONE'
When enabled in auto mode, long data labels are truncated by adding ellipses to prevent them from overflowing the chart background. The default value is 1.
Range: 0/1
This attribute lets you set whether the data labels will show up as rotated labels on the chart.
Range: 0/1
If you've opted to show rotated labels on chart, this attribute lets you set the configuration whether the labels will show as slanted labels or fully vertical ones.
Range: 0/1
Sets the configuration whether data values will be displayed along with the data plot on chart.
Range: 0/1
If you've opted to show data values on the chart, this attribute lets you adjust the vertical alignment of data values with respect to dataplots. By default, this attribute is set to AUTO mode in which the alignment of each data value is determined automatically based on the position of each plot point. In ABOVE mode, data values are displayed above the plot points unless a plot point is too close to the upper edge of the canvas while in BELOW mode, data values are displayed below the plot points unless a plot point is too close to the lower edge of the canvas.
Range: "ABOVE", "BELOW", "AUTO"
If you've opted to show data values, you can rotate them using this attribute.
Range: 0/1
If you've opted to show data values, you can show them inside the columns using this attribute. By default, the data values show outside the column.
Range: 0/1
By default, all the labels are displayed on the chart. However, if you've a set of streaming data (like name of months or days of week), you can opt to show every n-th label for better clarity. This attribute just lets you do so. When a value greater than 1 (n) is set to this attribute, the first label from left and every label at the n-th position from left will be displayed. e.g., a chart showing data for 12 months and set with labelStep: 3 will show labels for January, April, July, and October. The rest of the labels will be skipped.
Range: 1 or above
If you've opted for STAGGER mode as labelDisplay, using this attribute you can control how many lines to stagger the label to. By default, all labels are displayed in a single line.
Range: 2 or above
Whether to show chart limit values. If not specified showYAxisValues attribute overrides this value.
Range: 0/1
Whether to show div line values. If not specified showYAxisValues attribute overrides this value.
Range: 0/1
Whether to apply the shadow effects for data plot.
Range: 0/1
FusionCharts XT automatically tries to adjust divisional lines and limit values based on the data provided. However, if you want to set your explicit lower and upper limit values and number of divisional lines, first set this attribute to false. That will disable automatic adjustment of divisional lines.
Range: 0/1
The entire chart can now act as a hotspot. Use this URL to define the hotspot link for the chart. The link can be specified in FusionCharts Link format.
Sets whether the clickURL attribute (that sets a link to which the user is directed when the chart is clicked) overrides the link attribute (that sets a link to which the user is directed when a data plot is clicked).
Default value: 0 (clickURL does not override link)
Range: 0/1
This attribute lets you set whether the y-axis lower limit will be 0 (in case of all positive values on chart) or should the y-axis lower limit adapt itself to a different figure based on values provided to the chart.
Range: 0/1
This attribute, when set to 1, indicates to the chart that the text (rendered on the chart) may contain RTL characters and the textual display has to be managed accordingly.
This attribute lets you enable/disable the highlight effect, in the form of a fadeout, for the data plots corresponding to a legend item. When this attribute is enabled and the mouse pointer is hovered over a legend item label, plots belonging to the other data series fadeout, by reducing their opacity.
The fadeout effect can be customized by specifying the fadeout color and opacity using the color and alpha attributes. Eg. fadeout|color=#ff0000, alpha=60
Whether to show "Print Chart" item in the context menu of the chart? Even if you opt to hide the item in context menu, you can still opt to invoke print() JavaScript method of the chart to print the same.
Range: 0/1
This attribute changes the theme of the chart. There are 7 types of themes which have been made according to the different color combinations.
Range: 'fusion', 'gammel', 'candy', 'ocean', 'zune', 'carbon', 'umber'
Chart Message-related Attributes
These attributes let you set and configure custom chart messages, using text as well as images. These attributes are supported in FusionCharts constructor (FusionCharts({ })).
This attribute allows to set a custom font for all chart messages.
This attribute allows to set a custom font size for all chart messages.
Range: In pixels
This attribute allows to set a custom font color for all chart messages.
Range: Hex Color Code
This attribute allows to set a custom horizontal alignment for all images displayed as chart messages.
Default value: middle
Range: left, middle, right
This attribute allows to set a custom vertical alignment for all images displayed as chart messages.
Default value: middle
Range: top, middle, bottom
This attribute allows to set a transparency for all images displayed as chart messages.
Default value: 100
Range: 0 - 100
This attribute allows to set a scale for magnifying all images displayed as chart messages.
Default value: 100
Range: 0-300
This attribute allows to set the message to be displayed when a chart begins to load. To display an image as the chart message, prefix I- to the image URL.
This attribute allows to set the font for the message displayed when a chart begins to load.
Range: Font Name
This attribute allows to set the font size for the message displayed when a chart begins to load.
Range: In pixels
This attribute allows to set the font color for the message displayed when a chart begins to load.
Range: Hex Color Code
If an image is displayed as the chart loadMessage, this attribute allows to set a custom horizontal alignment for the image.
Default value: value assigned to the baseChartMessageImageHAlign attribute
Range: left, middle, right
If an image is displayed as the chart loadMessage, this attribute allows to set a custom vertical alignment for the image.
Default value: value assigned to the baseChartMessageImageVAlign attribute
Range: top, middle, bottom
If an image is displayed as the chart loadMessage, this attribute allows to set the transparency of the image.
Default value: 100
Range: 0 - 100
If an image is displayed as the chart loadMessage, this attribute allows to set the scale for magnifying the image.
Default value: 100
Range: 0-300
This attribute allows to set the message to be displayed when the specified chart type is not supported. To display an image as the chart message, prefix I- to the image URL.
This attribute allows to set the font for the message displayed when the specified chart type is not supported.
Range: Font Name
This attribute allows to set the font size for the message displayed when the specified chart type is not supported.
Range: In pixels
This attribute allows to set the font color for the message displayed when the specified chart type is not supported.
Range: Hex Color Code
If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set a custom horizontal alignment for the image.
Default value: value assigned to the baseChartMessageImageHAlign attribute
Range: left, middle, right
If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set a custom vertical alignment for the image.
Default value: value assigned to the baseChartMessageImageVAlign attribute
Range: top, middle, bottom
If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set the transparency of the image.
Default value: 100
Range: 0 - 100
If an image is displayed as the chart typeNotSupportedMessage, this attribute allows to set the scale for magnifying the image.
Default value: 100
Range: 0-300
This attribute allows to set the message to be displayed if an error is encountered while rendering the chart. To display an image as the chart message, prefix I- to the image URL.
This attribute allows to set a font for the message displayed if an error is encountered while rendering the chart.
Range: Font Name
This attribute allows to set the font size for the message displayed if an error is encountered while rendering the chart.
Range: In pixels
This attribute allows to set the font color for the message displayed if an error is encountered while rendering the chart.
Range: Hex Color Code
If an image is displayed as the chart renderErrorMessage, this attribute allows to set a custom horizontal alignment for the image.
Default value: value assigned to the baseChartMessageImageHAlign attribute
Range: left, middle, right
If an image is displayed as the chart renderErrorMessage, this attribute allows to set a custom vertical alignment for the image.
Default value: value assigned to the baseChartMessageImageVAlign attribute
Range: top, middle, bottom
If an image is displayed as the chart renderErrorMessage, this attribute allows to set the transparency of the image.
Default value: 100
Range: 0 - 100
If an image is displayed as the chart renderErrorMessage, this attribute allows to set the scale for magnifying the image.
Default value: 100
Range: 0-300
This attribute allows to set the message to be displayed when chart data begins loading. To display an image as the chart message, prefix I- to the image URL.
This attribute allows to set a font for the message displayed when chart data begins loading.
Range: Font Name
This attribute allows to set the font size for the message displayed when chart data begins loading.
Range: In pixels
This attribute allows to set the font color for the message displayed when chart data begins loading.
Range: Hex Color Code
If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set a custom horizontal alignment for the image.
Default value: value assigned to the baseChartMessageImageHAlign attribute
Range: left, middle, right
If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set a custom vertical alignment for the image.
Default value: value assigned to the baseChartMessageImageVAlign attribute
Range: top, middle, bottom
If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set the transparency of the image.
Default value: 100
Range: 0 - 100
If an image is displayed as the chart dataLoadStartMessage, this attribute allows to set the scale for magnifying the image.
Default value: 100
Range: 0-300
This attribute allows to set the message to be displayed if the data loaded for a chart is empty. To display an image as the chart message, prefix I- to the image URL.
This attribute allows to set the font for the message displayed if the data loaded for a chart is empty
Range: Font Name
This attribute allows to set the font size for the message displayed if the data loaded for a chart is empty.
Range: In pixels
This attribute allows to set the font color for the message displayed if the data loaded for a chart is empty.
Range: Hex Color Code
If an image is displayed as the chart dataEmptyMessage, this attribute allows to set a custom horizontal alignment for the image.
Default value: value assigned to the baseChartMessageImageHAlign attribute
Range: left, middle, right
If an image is displayed as the chart dataEmptyMessage, this attribute allows to set a custom vertical alignment for the image.
Default value: value assigned to the baseChartMessageImageVAlign attribute
Range: top, middle, bottom
If an image is displayed as the chart dataEmptyMessage, this attribute allows to set the transparency of the image.
Default value: 100
Range: 0 - 100
If an image is displayed as the chart dataEmptyMessage, this attribute allows to set the scale for magnifying the image.
Default value: 100
Range: 0-300
This attribute allows to set the message to be displayed if an error is encountered while loading chart data. To display an image as the chart message, prefix I- to the image URL.
This attribute allows to set a font for the message displayed if an error is encountered while loading chart data.
Range: Font Name
This attribute allows to set the font size for the message displayed if an error is encountered while loading chart data.
Range: In pixels
This attribute allows to set the font color for the message displayed if an error is encountered while loading chart data.
Range: Hex Color Code
If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set a custom horizontal alignment for the image.
Default value: value assigned to the baseChartMessageImageHAlign attribute
Range: left, middle, right
If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set a custom vertical alignment for the image.
Default value: value assigned to the baseChartMessageImageVAlign attribute
Range: top, middle, bottom
If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set the transparency of the image.
Default value: 100
Range: 0 - 100
If an image is displayed as the chart dataLoadErrorMessage, this attribute allows to set the scale for magnifying the image.
Default value: 100
Range: 0-300
This attribute allows to set the message to be displayed if the data to be loaded for the chart is invalid. To display an image as the chart message, prefix I- to the image URL.
This attribute allows to set the font for the message displayed if the specified chart data is invalid.
Range: Font Name
This attribute allows to set the font size for the message displayed if the specified chart data is invalid.
Range: In pixels
This attribute allows to set the font color for the message displayed if the specified chart data is invalid.
Range: Hex Color Code
If an image is displayed as the chart dataInvalidMessage, this attribute allows to set a custom horizontal alignment for the image.
Default value: value assigned to the baseChartMessageImageHAlign attribute
Range: left, middle, right
If an image is displayed as the chart dataInvalidMessage, this attribute allows to set a custom vertical alignment for the image.
Default value: value assigned to the baseChartMessageImageVAlign attribute
Range: top, middle, bottom
If an image is displayed as the chart dataInvalidMessage, this attribute allows to set the transparency of the image.
Default value: 100
Range: 0 - 100
If an image is displayed as the chart dataInvalidMessage, this attribute allows to set the scale for magnifying the image.
Default value: 100
Range: 0-300
Chart Titles and Axis Names
Using these attributes, you can set the various headings and titles of chart like caption, sub-caption, x-axis and y-axis names etc.
Caption of the chart.
Sub-caption of the chart.
X-axis title of the chart.
Y-axis title of the chart.
Chart Caption Cosmetics
These attributes let you configure the cosmetics of chart caption and sub-caption.
Sets horizontal alignment of caption
Range: "left", "center", "right"
Whether caption should be on top of the data plot area
Range: 0/1
Sets the caption font size in pixels
Range: 6 - 72
Sets the sub-caption font size (in pixels)
Range: 6 - 72
Sets the caption font family
Range: Font Name
Sets the sub-caption font family
Range: Font Name
Sets the caption font color
Range: Hex Color Code
Sets the sub-caption font color
Range: Hex Color Code
Whether the caption font should be displayed in bold
Range: 0/1
Whether the sub caption font should be displayed in bold
Range: 0/1
Whether the caption is aligned with the canvas. Else, it will be aligned with the entire chart area
Range: 0/1
If caption is not centre aligned, lets you configure the padding (in pixels) from either edge. Will be ignored if caption is centre aligned.
Range: In Pixels
Chart Axis Configuration Attributes
Using these attributes, you can set and configure x-axis labels, y-axis values and set chart cosmetics for the axis like color, alpha, etc.
If you hide a dataset using legend icon, this attribute (when set to 1) will compute the axes limit with respect to maximum and minimum value of the visible dataset(s).
Default value: 0
Range: 0/1
FusionCharts XT y-axis is divided into vertical sections using div (divisional) lines. Each div line assumes a value based on its position. Using this attribute you can set whether to show those div line (y-axis) values or not. This attribute shows or hides the y-axis divisional lines and limits. The values of showLimits and showDivLineValues, if specified explicitly, overrides the value of this attribute.
Range: 0/1
By default, all div lines show their values. However, you can opt to display every x(th) div line value using this attribute.
Range: 1 or above
If you do not wish to rotate y-axis name, set this as 0. It specifically comes to use when you've the special characters (UTF-8) in your y-axis name that do not show up in rotated mode.
Range: 0/1
This attribute helps you explicitly set the lower limit of the chart. If you don't specify this value, it is automatically calculated by FusionCharts XT based on the data provided by you.
Range: Numeric Value
This attribute helps you explicitly set the upper limit of the chart. If you don't specify this value, it is automatically calculated by FusionCharts XT based on the data provided by you.
Range: Numeric Value
Whether to forcefully attach decimal places to all y-axis values. For example, If you limit the maximum number of decimal digits to 2, a number like 55.345 will be rounded to 55.34. This does not mean that all y-axis numbers will be displayed with a fixed number of decimal places. For instance 55 will not be displayed as 55.00 and 55.1 will not become 55.10. In order to have fixed number of decimal places attached to all y-axis numbers, set this attribute to 1.
Range: 0/1
If you've opted to not adjust div lines, you can specify the div line values decimal precision using this attribute.
Range: 0-10
x-Axis Name Cosmetics
To configure the font cosmetics of x-axis name (title), you can use the following attributes.
Sets the x-axis font family for the text
Range: Font Name
Sets the x-axis font color
Range: Hex Color Code
Specifies the x-axis font size
Range: 6 - 72
Whether x-axis font should be bold
Range: 0/1
Whether x-axis font should be italicized
Range: 0/1
Sets the background color for x-axis text
Range: Hex Color Code
Sets the border around the x-axis text
Range: Hex Color Code
Sets the x-axis alpha including font and background
Range: 0 - 100
Sets the x-axis font alpha
Range: 0 - 100
Sets the x-axis background alpha
Range: 0 - 100
Sets the x-axis border alpha
Range: 0 - 100
Sets the x-axis border padding
Range: In Pixels
Sets the x-axis border radius
Range: In Pixels
Sets the x-axis border thickness
Range: In Pixels
Whether the border around the x-axis name should be rendered using dashed lines.
Default value: 0 (border rendered using straight lines)
Range: 0/1
Sets the length of each dash when the border around the x-axis name is rendered using dashed lines.
Range: In pixels
Sets the gap between consecutive dashes when the border around the x-axis name is rendered using dashed lines.
Range: In pixels
y-Axis Name Cosmetics
To configure the font cosmetics of y-axis name (title), you can use the following attributes.
Sets the y-axis (primary / secondary) font family for the text
Range: Font Name
Sets the y-axis (primary / secondary) font color
Range: Hex Color Code
Specifies the y-axis (primary / secondary) font size
Range: 6 - 72
Whether y-axis (primary / secondary) font should be bold
Range: 0/1
Whether y-axis (primary / secondary) font should be italicized
Range: 0/1
Sets the background color for y-axis (primary / secondary) text
Range: Hex Color Code
Sets the border around the y-axis (primary / secondary) text
Range: Hex Color Code
Sets the y-axis (primary / secondary) alpha including font and background
Range: 0 - 100
Sets the y-axis (primary / secondary) font alpha
Range: 0 - 100
Sets the y-axis (primary / secondary) background alpha
Range: 0 - 100
Sets the y-axis (primary / secondary) border alpha
Range: 0 - 100
Sets the y-axis (primary / secondary) border padding
Range: In Pixels
Sets the y-axis (primary / secondary) border radius
Range: In Pixels
Sets the y-axis (primary / secondary) border thickness
Range: In Pixels
Whether the border around the y-axis name should be rendered using dashed lines.
Default value: 0 (border rendered using straight lines)
Range: 0/1
Sets the length of each dash when the border around the y-axis name is rendered using dashed lines.
Range: In pixels
Sets the gap between two consecutive dashes when the border around the y-axis name is rendered using dashed lines.
Range: In pixels
Chart Cosmetics
The following attributes let you configure chart cosmetics like background color, background alpha, canvas color etc.
Whether to show a border around the chart or not.
Range: 0/1
Border color of the chart.
Range: Hex Color Code
Border thickness of the chart.
Range: In Pixels
Border alpha of the chart.
Range: 0 - 100
This attribute sets the background color for the chart. You can set any hex color code as the value of this attribute. To specify a gradient as background color, separate the hex color codes of each color in the gradient using comma. Example: #FF5904, #FFFFFF.
Range: Hex Color Code
Sets the alpha (transparency) for the background. If you've opted for gradient background, you need to set a list of alpha(s) separated by comma.
Range: 0 - 100
If you've opted for a gradient background, this attribute lets you set the ratio of each color constituent.
Range: 0 - 100
Sets the angle of the background color, in case of a gradient.
Range: 0-360
To place any image (JPG/PNG/GIF) as background of the chart, enter the (path and) name of the background image. It should be in the same domain as the chart.
This attribute specifies the opacity for the loaded background image.
Range: 0 - 100
Helps you specify the mode in which the background image is to be displayed. Stretch - expands the image to fit the entire chart area, without maintaining original image constraints. Tile - the image is repeated as a pattern on the entire chart area. Fit - fits the image proportionately on the chart area. Fill -proportionately fills the entire chart area with the image. Center - the image is positioned at the center of the chart area. None - Default mode.
Range: stretch, tile, fit, fill, center, none
Helps you to vertically align the background image.
Range: top, middle, bottom
Helps you to horizontally align the background image.
Range: left, middle, right
Helps you magnify the background image.This attribute will only work when the attribute bgImageDisplayMode is set to none, center, or tile.
Range: 0-300
This attribute if set to _1_, shows a border around the canvas of the chart.
Default value: 0
Range: 0/1
This attribute sets the background transparency for the chart canvas. For gradient, separate the alpha value using comma. Example: 15, 50.
Range: 0 - 100
This attribute sets the background color for the chart canvas. You can set any hex color code as the value of this attribute. To specify a gradient as canvas background color, separate the hex color codes of each color in the gradient using comma. Example: #FF5904, #FFFFFF.
Range: Hex Color Code
If you've opted to show a label for any of your vLines in the chart, you can collectively configure whether to show border for all such labels using this attribute. If you want to show label border for just a particular vLine, you can over-ride this value by specifying border configuration for that specific vLine.
Range: 0/1
This attribute lets you set whether the vline labels will show up as rotated labels on the chart.
Default value: 0
Range: 0/1
You can load an external logo (JPEG/PNG) to your chart, this attribute lets you specify the URL. Due to cross domain security restrictions it is advised to use a logo from the same domain name as your charts.
Range: URL
This attribute helps you set the amount of empty space that you want to put on the left side of your logo image. Nothing is rendered in this space.
Range: In Pixels
This attribute helps you set the amount of empty space that you want to put on top of your logo image. Nothing is rendered in this space.
Range: In Pixels
Where to position the logo on the chart: TL - Top-left TR - Top-right BR - Bottom right BL - Bottom left CC - Center of screen
Range: TL TR BL BR CC
Once the logo has loaded on the chart, you can configure its opacity using this attribute.
Range: 0 - 100
You can also change the scale of an externally loaded logo at run-time by specifying a value for this parameter.
Range: 0-300
If you want to link the logo to an external URL, specify the link in this attribute. The link can be in FusionCharts Link format, allowing you to link to new windows, pop-ups, frames etc.
Range: URL
Data Value Cosmetics
These attributes let you configure font, background and border cosmetics, of value text-field that appear for each data plot.
Sets the font of the values in the chart
Range: Font Name
Specifies the value font color
Range: Hex Color Code
Specifies the value font size
Range: 6 - 72
Whether value font should be bold
Range: 0/1
Whether value font should be italicized
Range: 0/1
Sets the background color for value text
Range: Hex Color Code
Sets the border color around the value text
Range: Hex Color Code
Sets the value alpha including font and background
Range: 0 - 100
Sets the value font alpha
Range: 0 - 100
Sets the value background alpha
Range: 0 - 100
Sets the value border alpha
Range: 0 - 100
Sets the value border thickness
Range: In Pixels
Sets the padding between the value and its surrounding border
Range: In Pixels
Sets the value border radius
Range: In Pixels
Whether the border around the data values should be rendered using dashed lines.
Default value: 0 (border rendered using straight lines)
Range: 0/1
Sets the length of each dash when the border around the data values is rendered using dashed lines.
Range: In pixels
Sets the gap between two consecutive dashes when the border around the data values is rendered using dashed lines.
Range: In pixels
Set this attribute to 1 to draw a border on the data value text.
Default value: 0
Range: 0/1
Y-Axis Value Cosmetics
These attributes let you configure font, background and border cosmetics, of the Y-axis value text.
Set the font family for the Y-axis value texts.
Default value: verdana,sans
Range: Font Name
Sets the font color for the Y-axis value texts.
Default value: #555555
Range: Hex Color Code
Sets the font size for the Y-axis value texts.
Default value: 10 px
Range: 6 - 72
Displays the Y-axis value texts in bold.
Default value: 0
Range: 0/1
Displays the Y-axis value texts in italic.
Default value: 0
Range: 0/1
Sets the background color for the Y-axis values.
Range: Hex Color Code
Sets the border color for the Y-axis values.
Range: Hex Color Code
Sets the transparency for the Y-axis values between transparent (for 0) and opaque (for 100).
Default value: 100
Range: 0 - 100
Sets the transparency for the Y-axis value backgrounds between transparent (for 0) and opaque (for 100).
Range: 0 - 100
Sets the transparency for the Y-axis values between transparent (for 0) and opaque (for 100).
Range: 0 - 100
Sets the border padding for the Y-axis values.
Range: In Pixels
Sets the border radius for the Y-axis values.
Range: In Pixels
Sets the border thickness for the Y-axis values.
Range: In Pixels
Makes the Y-axis value borders dashed.
Default value: 0 (border rendered using straight lines)
Range: 0/1
Sets the lengths of the individual dashes when the Y-axis value borders are dashed.
Range: In pixels
Sets the gaps between individual dashes when the Y-axis value borders are dashed.
Range: In pixels
Sets a target link for all Y-axis values.
Divisional Lines, Grids & Zero Plane
Using this set of attributes, you can control the properties of divisional lines, zero plane and alternate color bands. Divisional Lines are horizontal or vertical lines running through the canvas. Each divisional line signifies a smaller unit of the entire axis thus aiding the users in interpreting the chart. The zero plane is a plane that signifies the 0 position on the chart. If there are no negative numbers on the chart, you won't see a visible zero plane. Alternate color bands are colored blocks between two successive divisional lines.
Number of horizontal axis division lines that you want on the chart.
Range: Numeric value > 0
This attribute enables you to apply an effect, for example, EMBOSS, or BEVEL to the divisional lines as well as to the trendlines.
Range: EMBOSS or BEVEL or NONE
Color for divisional lines.
Range: Hex Color Code
Thickness of divisional lines.
Range: 1-5
Alpha of divisional lines.
Range: 0 - 100
Whether the divisional lines should be rendered as dashed lines.
Default value: 0 (divisional lines rendered using straight lines)
Range: 0/1
Sets the length of each dash when divisional lines are rendered as dashed lines.
Range: In pixels
Sets the gap between two consecutive dashes when divisional lines are rendered as dashed lines.
Range: In pixels
Whether to draw the zero plane as a wireframe mesh or as a filled plane. If set to 1, a mesh on the zero plane of the chart will be drawn.
Range: 0/1
Color of the Zero Plane.
Range: Hex Color Code
Thickness of zero plane.
Range: In Pixels
Alpha of zero plane.
Range: 0 - 100
Allows you to show or hide the value on which the zero plane exists on the y-axis. By default, the value is displayed.
Range: 0/1
Whether to show alternate colored horizontal grid bands.
Range: 0/1
Color of the alternate horizontal grid bands.
Range: Hex Color Code
Anchor Properties
In line and area charts, anchors (or marker points) are polygons which appear at the joint of two consecutive line/area points. These are indicators to show the position of data points. The anchors handle tool tips and links for the data points. So, if you opt to not render anchors on a chart, the tool tips and links won't function. You can, however, hide them by setting alpha to 0 and still enable tool tips and links. In area charts, anchors are set transparent by default. In case you wish to show the anchor, use anchorAlpha="100" attribute. You can customize all the facets of anchors using the properties below.
Whether to draw anchors on the chart.
Range: 0/1
This attribute sets the number of sides the anchor will have. For e.g., an anchor with 3 sides will represent a triangle, with 4 it will be a square and so on.
This attribute sets the starting angle of anchors.
Default value: 90
Range: 0 - 360
This attribute sets the radius (in pixels) of the anchor.
Range: In pixels
Lets you set the color of anchors.
Range: Hex Color Code
Lets you set the border color of anchors.
Range: Hex Color Code
Helps you set border thickness of anchors.
Range: In Pixels
Helps you set the background color of anchors.
Range: Hex Color Code
Helps you set the alpha of entire anchors. If you need to hide the anchors on chart but still enable tool tips, set this as 0.
Range: 0 - 100
Helps you set the alpha of anchor background.
Range: 0 - 100
If you want to use an external image (JPG/PNG) as an anchor, this attribute lets you specify the URL.
Note: Due to cross domain security restrictions it is advised to use an image from the same domain name as your charts.
Range: URL
This attribute allows to set a transparency for images displayed as anchors in charts.
Default value: 100
Range: 0 - 100
This attribute allows to set a scale for magnifying images displayed as anchors.
Default value: 100
Range: 0 - 100
This attribute sets the padding between the anchor image and the border of the anchor. For the anchor image, instead of decreasing the size of the image this attribute crops the image.
Default value: 1
Range: In Pixels
Legend Properties
In combination charts, the series name of each dataset shows up in the legend of the chart. If you do not need the legend, you can opt to hide the same. Also, the legend can be placed at the bottom of the chart or to the right of the chart. Using the attributes below, you can configure the functional and cosmetic properties of the legend.
Whether to show legend for the chart.
Range: 0/1
Whether legend keys should be displayed in bold
Range: 0/1
Sets legend item font
Range: Font Name
Sets legend item font size
Range: 6 - 72
Sets legend item font color
Range: Hex Color Code
Sets legend item font color on hover
Range: Hex Color Code
Whether
Range: 0/1
Sets the legend caption horizontal alignment .
Range: "left", "center", "right"
Whether legend caption should be displayed in bold
Range: 0/1
Sets legend caption font
Range: Font Name
Sets legend caption font size
Range: 6 - 72
Sets legend caption font color
Range: Hex Color Code
The legend can be plotted at two positions on the chart - below (BOTTOM) the chart and to the right (RIGHT) of the chart.
Range: BOTTOM or RIGHT
You can reverse the ordering of datasets in the legend by setting this attribute to 1.
Range: 0/1
Sets the color that applies on both text font and icon when they are in a disabled / hidden state
Range: Hex Color Code
You can add a caption for the entire legend by setting the same here.
Range:
Scaling of legend icon is possible in FusionCharts XT. This attribute lets you control the size of legend icon.
Range: 1-5
Background color for the legend.
Range: Hex Color Code
Background alpha for the legend.
Range: 0 - 100
Border Color for the legend.
Range: Hex Color Code
Border thickness for the legend.
Range: In Pixels
Border alpha for the legend.
Range: 0 - 100
Whether to show a shadow for legend.
Range: 0/1
The legend can be made drag-able by setting this attribute to 1. End viewers of the chart can drag the legend around on the chart.
Range: 0/1
If you've too many items on the legend, a scroll bar shows up on the same. This attribute lets you configure the background color of the scroll bar.
Range: Hex Color Code
If your chart contains multiple series, the legend is displayed as a grid comprising of multiple legend keys. With the help of this attribute you can specify the number of columns that are to be displayed in the legend.
Range: Positive Integer
Whether to minimize legend item text wrapping.
Range: 0/1
Specifies whether drawing a custom legend icon will be enabled. All legend icon customization attributes will work only if this feature is enabled.
Default value: 0 (disabled)
Range: 0/1
Sets the border color for the legend icon.
Default value: Data plot border color
Range: Hex Color Code
Sets the background color for the legend icon.
Default value: Data plot fill color
Range: Hex Color Code
Sets the legend icon transparency.
Default value: 100
Range: 0 - 100
Sets the legend icon background transparency.
Default value: 100
Range: 0 - 100
Sets the number of sides for the legend icon.
Default value: 4
Sets the thickness of the legend icon border.
Default value: 1
Range: 1-5
Sets the starting angle of for drawing the legend icon.
Default value: 45
This attribute if set to 0, the legend box will be center aligned with respect to the entire width of the chart only if the total width of the legend box is more than the canvas width. By default, the legend box is center aligned with respect to the canvas width and it remains the same if the width of the legend box is less than the canvas width.
Range: 0/1
Number Formatting
FusionCharts XT offers you a lot of options to format your numbers on the chart. Using the attributes below, you can control a myriad of options like: Formatting of commas and decimals Number prefixes and suffixes Decimal places to which the numbers will round to Scaling of numbers based on a user defined scale Custom number input formats
This configuration determines whether the numbers displayed on the chart will be formatted using commas, e.g., 40,000 if 'formatNumber': '1'; and 40000 if 'formatNumber': '0';.
Range: 0/1
Configuration whether to add K (thousands) and M (millions) to a number after truncating and rounding it - e.g., if formatNumberScale is set to 1, 1043 will become 1.04K (with decimals set to 2 places). Same with numbers in millions - an M will be added at the end.
Range: 0/1
The default unit of the numbers that you're providing to the chart.
Unit of each block of the scale.
Range of the various blocks that constitute the scale.
If a data value is less than the lowest given number is the number scale, this attribute forces the lower value of the numberScaleUnit to be applied to that data value. This attribute works only when “formatNumberScale”: “1” and the defaultNumberScale attribute is not defined.
For example, if “numberScaleUnit”: “K, M”, “numberScaleValue”: “1000, 1000”, and “forceNumberScale”: “1”, a data value of 400 will be rendered as 0.40K.
Range: 0/1
Whether recursive scaling should be applied.
Range: 0/1
How many recursions to complete during recursive scaling? -1 completes the entire set of recursion.
What character to use to separate the scales that are generated after recursion?
Using this attribute, you could add prefix to all the numbers visible on the graph. For example, to represent all dollars figure on the chart, you could specify this attribute to $ to show like $40000, $50000.
Range: Character
Using this attribute, you could add a suffix to all the numbers visible on the graph. For example, to represent all figures quantified as per annum on the chart, you could specify this attribute to '/a' to show like 40000/a, 50000/a.
Range: Character
This attribute helps you specify the character to be used as the decimal separator in a number.
Range: Character
This attribute helps you specify the character to be used as the thousands separator in a number.
Range: Character
This option helps you specify the position of the thousand separator.
Range:
In some countries, commas are used as decimal separators and dots as thousand separators. In XML, if you specify such values, it will give an error while converting to number. So, FusionCharts XT accepts the input decimal and thousand separator from user, so that it can convert it accordingly into the required format. This attribute lets you input the decimal separator.
Range: Character
In some countries, commas are used as decimal separators and dots as thousand separators. In XML, if you specify such values, it will give an error while converting to number. So, FusionCharts XT accepts the input decimal and thousand separator from user, so that it can convert it accordingly into the required format. This attribute lets you input the thousand separator.
Range: Character
Number of decimal places to which all numbers on the chart will be rounded to.
Range: 0-10
Whether to add 0 padding at the end of decimal numbers. For example, If you limit the maximum number of decimal digits to 2, a number like 55.345 will be rounded to 55.34. This does not mean that all numbers will be displayed with a fixed number of decimal places. For instance 55 will not be displayed as 55.00 and 55.1 will not become 55.10. In order to have fixed number of decimal places attached to all the numbers, set this attribute to 1.
Range: 0/1
Font Properties
Using the attributes below, you can define the generic font properties for all the text on the chart. These attributes allow you a high level control over font properties. If you intend to specify font properties for individual chart elements (like Caption, sub-caption etc.), you'll need to use the Styles feature of FusionCharts XT. Using Styles, you can also specify advanced font properties like Bold, Italics, HTML Mode etc.
This attribute lets you set the font face (family) of all the text (data labels, values etc.) on chart. If you specify the outCnvBaseFont attribute also, then this attribute controls only the font face of text within the chart canvas bounds.
Range: Font Name
This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font size provided here.
Range: 6 - 72
This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font color provided here.
Range: Hex Color Code
This attribute sets the base font family of the chart text which lies outside the canvas i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font name provided here.
Range: Font Name
This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font size provided here.
Range: 6 - 72
This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font color provided here.
Range: Hex Color Code
Tooltip Attributes
These attributes let you control the tool tip. You can set the background color, border color, separator character and few other details.
Whether to show tool tip on chart.
Range: 0/1
Background color for tool tip.
Range: Hex Color Code
Font color for the tool-tip.
Range: Hex Color Code
Border color for tool tip.
Range: Hex Color Code
Sets the border transparency for tool tip.
Range: 0 - 100
The character specified as the value of this attribute separates the name and value displayed in tool tip.
For combination charts, FusionCharts XT shows the following information in tool tip (unless tool text is explicitly defined): "Series Name, Category Name, Data Value". This attribute lets you control whether series name will show up in tool tip or not.
Range: 0/1
Whether to show shadow for tool-tips on the chart.
Range: 0/1
Sets the transparency of the tooltip.
Range: 0 - 100
Sets the border radius of the tooltip.
Range: In Pixels
Sets the border thickness of the tooltip.
Range: In Pixels
This attribute sets the vertical space between the value and the border of the tooltip. If you want more space between the value and the border, you can use this attribute to control it.
Range: In Pixels
Specify custom text for the tooltip
You can either specify a constant string as the tooltip text or you can use variable values from the data level by prefixing a $ to the attribute name, for example, $name, $value.
Toolbar Attributes
Using this set of attributes, you can customize the toolbar on the chart. The advantage of having a toolbar is that it manages all the UI action elements (context menus, checkboxes, buttons) centrally. This provides a clean, uniform look and a better, more meaningful and logical grouping.
Where to position the toolbar on the chart: TL - Top-left TR - Top-right BR - Bottom right BL - Bottom left CC - Center of screen
Range: TL, TR, BL, BR, CC
Sets the toolbox position on the chart with respect to x-axis.
Sets the toolbox position on the chart with respect to y-axis.
Sets the horizontal alignment of the toolbar on the chart.
Range: Left, Right
Sets the vertical alignment of the toolbar on the chart
Range: Top, Bottom
Sets the color of the toolbar buttons.
Range: Any (color code without the # prefix)
Enables/disables display of tooltips for toolbar buttons.
Range: 0/1
You can change the scale of the toolbar by specifying a value for this attribute.
Attributes for Exporting Charts
These attributes allow you to control the saving of chart as image, SVG or XLSX.
Whether the chart will allow exporting to images, PDFs, SVG, XLSX or CSV format.
Default value: 0
Range: 0/1
In case of server-side exporting, the action specifies whether the exported image will be sent back to client as download, or whether it'll be saved on the server.
Default value: download
Range: 'save' or 'download'
In case of server side exporting, this refers to the path of the server-side export handler (the ready-to-use scripts that we provide).
Lets you configure what output formats to allow for export of chart, in the export context menu, and also customize the label for each menu item. The attribute value should be a pipe (|) delimited separated key-value pair. Example: exportFormats: 'PNG=Export as High Quality Image|JPG|PDF=Export as PDF File'
This attributes sets the modes of export. To enable client-side exporting, set this attribute to client.
Default value: auto.
Note: Starting v3.12.1, the exportMode attribute replaces the exportAtClientSide attribute. However, you don’t need to make any changes to the existing setup because, the FusionCharts library comes with the proper mapping already provided.
Whether the menu items related to export (e.g., Save as JPEG etc.) will appear in the context menu of chart.
Range: 0/1
In case of server-side exporting and when using download as action, this lefts you configure whether the return image, PDF, SVG or XLSX will open in same window (as an attachment for download), or whether it will open in a new window.
Default value: _self
Range: '_self' or '_blank'
Using this attribute you can specify the name (excluding the extension) of the output (export) file.
Data Plot Hover Effects
If you wish to show an effect on the data plot (column, line anchor, pie etc.) when the user hovers his mouse over the data plot, these attributes let you configure the cosmetics of the hover for all data plots in the chart.
Whether to enable hover effect on charts for all elements
Range: 0/1
Whether to enable hover effect on charts for data plots (e.g., column, pie) only
Range: 0/1
Specifies the hover color for the data plots
Range: Hex Color Code
Specifies the hover alpha for data plots
Range: 1 - 100
Sets whether to enable the hover effect on charts for anchors.
Range: 0/1
This attribute sets the hover color for anchors.
Range: Hex Color Code
This attribute specifies the transparency for the anchors when hovered.
Range: 0 - 100
This attribute sets the number of sides of the anchor when hovered.
Range: In Pixels
This attribute sets the radius of the anchor when hovered.
Range: In pixels
This attribute sets the background color of anchor when hovered.
Range: Hex color code
This attribute sets the transparency of anchor’s background when hovered.
Range: 0 - 100
Sets the border color of anchors when hovered.
Range: Hex color code
Sets the border's transparency of anchors when hovered.
Range: 0 - 100
This attribute sets the border thickness of the anchors when hovered.
Range: In pixels
This attribute sets the starting angle of the anchors when hovered.
Range: In pixels
This attribute specifies the hover color for the columns.
Range: Hex Color Code
This attribute specifies the transparency of the column when you hover.
Range: 0 - 100
This attribute adds a dip effect (different shapes) to the anchors on hover. When hovered a star shaped anchor is created. Using anchorSides attribute, you can specify the no. of sides for anchors.
Note : If the anchors are of circular shape, this attribute won't be applied on it.
Range: 0 - 1
Anchors get animated when the normal radius and the hover radius are different. To disable this effect you can set anchorHoverAnimation = 0.
Default value: 1
Range: 0/1
Chart Padding & Margins
The following attributes help you control chart margins and paddings. FusionCharts XT allows you manually customize the padding of various elements on the chart to allow advanced manipulation and control over chart visualization. Padding in FusionCharts XT is always defined in pixels, unless the attribute itself suggests some other scale (like plotSpacePercent, which configures the spacing using percentage values). You can also define the chart margins. Chart Margins refer to the empty space left on the top, bottom, left and right of the chart. That means, FusionCharts XT will not plot anything in that space. It's not necessary for you to specify any padding/margin values. FusionCharts XT automatically assumes the best values for the same, if you do not specify the same.
This attribute lets you control the space (in pixels) between the sub-caption and top of the chart canvas. If the sub-caption is not defined, it controls the space between caption and top of chart canvas. If neither caption, nor sub-caption is defined, this padding does not come into play.
Range: In Pixels
Using this, you can set the distance between the top end of x-axis title and the bottom end of data labels (or canvas, if data labels are not to be shown).
Range: In Pixels
Using this, you can set the distance between the right end of y-axis title and the start of y-axis values (or canvas, if the y-axis values are not to be shown).
Range: In Pixels
This attribute helps you set the horizontal space between the canvas left edge and the y-axis values or trend line values (on left/right side). This is particularly useful, when you want more space between your canvas and y-axis values.
Range: In Pixels
This attribute sets the vertical space between the labels and canvas bottom edge. If you want more space between the canvas and the x-axis labels, you can use this attribute to control it.
Range: In Pixels
This attribute helps you set the horizontal space between the canvas wall edge and the y-axis values or trend line values (on left/right side). This is particularly useful, when you want more space between your canvas and y-axis values.
Range: In Pixels
This attribute sets the vertical space between the labels and canvas wall edge. If you want more space between the canvas and the x-axis labels, you can use this attribute to control it.
Range: In Pixels
It sets the vertical space between the end of columns and start of value textboxes. This basically helps you control the space you want between your columns/anchors and the value textboxes.
Range: In Pixels
On a column chart, there is spacing defined between two columns. By default, the spacing is set to 20% of canvas width. If you intend to increase or decrease the spacing between columns, you can do so using this attribute. For example, if you wanted all columns to stick to each other without any space in between, you can set plotSpacePercent to 0. Similarly, if you want very thin columns, you can set plotSpacePercent to its max value of 80.
Range: 0-80 (In Percent)
This attribute adds white space between columns/bars representing a single category. Applicable only when there are more than one datasets.
Range: 0 - 100
Amount of empty space that you want to put on the left side of your chart. Nothing is rendered in this space.
Range: In Pixels
Amount of empty space that you want to put on the right side of your chart. Nothing is rendered in this space.
Range: In Pixels
Amount of empty space that you want to put on the top of your chart. Nothing is rendered in this space.
Range: In Pixels
Amount of empty space that you want to put at the bottom of your chart. Nothing is rendered in this space.
Range: In Pixels
Padding of legend from right/bottom side of canvas
Range: In Pixels
Allows you to set empty space on the left and right side of Line dataset or Area dataset on the chart canvas. This setting won't work if one or more Column datasets are present.
Range: In Pixels
This attribute lets you set the space between the left of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the left border of the canvas. Using this attribute, you can control the amount of empty space between the chart left side and data plot which might get clipped.
Range: In Pixels
This attribute lets you set the space between the right of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the right border of the canvas. Using this attribute, you can control the amount of empty space between the chart right side and data plot which might get clipped.
Range: In Pixels
This attribute lets you set the space between the top of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the top border of the canvas. Using this attribute, you can control the amount of empty space between the chart's top and data plot which might get clipped.
Range: In Pixels
This attribute lets you set the space between the bottom of the canvas border and the canvas of the chart. This attribute is particularly useful when your data plot gets clipped by the bottom border of the canvas. Using this attribute, you can control the amount of empty space between the chart's bottom and data plot which might get clipped.
Range: In Pixels
This attribute lets you control the space between the start of chart canvas and the start (x) of chart. In case of 2D charts, the canvas is the visible rectangular box. In case of 3D charts, the canvas box is the imaginary box around the 3D canvas. Using this attribute, you can control the amount of empty space between the chart left side and canvas left side. By default, FusionCharts XT automatically calculates this space depending on the elements to be placed on the chart. However, if you want to over-ride this value with a higher value, you can use this attribute to specify the same. Please note that you cannot specify a margin lower than what has been calculated by the chart. This attribute is particularly useful, when you've multiple charts placed in a page and want all their canvas start position to align with each other - so in such a case, you can set same margin value (a value large enough that it doesn't get rejected by chart owing to it being lower than the calculated value) for all such charts in the page.
Range: In Pixels
Like canvasLeftMargin, this attribute lets you set the space between end of canvas and end of chart.
Range: In Pixels
Like canvasLeftMargin, this attribute lets you set the space between top of canvas and top of chart.
Range: In Pixels
Like canvasLeftMargin, this attribute lets you set the space between bottom of canvas and bottom of chart.
Range: In Pixels
The categories Object
The categories object and the category object (child of the categories object) are used to specify x-axis labels for multi-series charts. The attributes of the categories object are used to set the font properties of all x-axis labels collectively.
Lets you specify font face for the x-axis data labels.
Range: Valid font face
Lets you specify font color for the x-axis data labels.
Range: Hex Color Code
Lets you specify font size for the x-axis data labels.
The category Object
The attributes of the category object are used to define and customize individual x-axis labels for multi-series charts.
This attribute determines the label for the data item. The label appears on the x-axis of chart.
Note: The label attribute replaces the name attribute. Previously, either one of the attributes could be used to set the label. Support for the name attribute has been discontinued since v3.10.0.
You can individually opt to show/hide labels of individual data items using this attribute.
Range: 0/1
The tooltip defined in the category object appears only when the mouse cursor is hovered over the data plots. However, this will not appear when the cursor is moved over the data labels (except for a situation when long labels are automatically truncated with ellipses. In this situation, if the mouse cursor is hovered over a truncated label, the tooltip will appear with the full label). In case you want to set a short label and show the full label in tooltip, define the full label using this attribute within the category object. The tooltip with the full label will appear only when the mouse is hovered on the dataplot.
Sets the x-axis label font family for the text.
Sets the x-axis label font color.
Range: Hex Color Code
Specifies the x-axis label font size.
Range: 6 - 72
Flag indicating whether x-axis label font should be bold or not.
Range: 0/1
Flag indicating whether x-axis label font should be italicized or not.
Range: 0/1
Sets the background color for x-axis label text.
Range: Hex Color Code
Sets the color of the border around the x-axis label text.
Range: Hex Color Code
Sets the x-axis label alpha for both font and background.
Range: 0 - 100
Sets the x-axis label background alpha.
Range: 0 - 100
Sets the x-axis label border alpha.
Range: 0 - 100
Sets the x-axis label border padding.
Range: In Pixels
Sets the x-axis label border radius.
Range: In Pixels
Sets the x-axis label border thickness.
Range: In Pixels
Whether the border around x-axis label should be rendered using dashed lines.
Default value: 0 (border rendered using straight lines)
Range: 0/1
Sets the length of each dash when the border around the x-axis label is rendered using dashed lines.
Range: In pixels
Sets the gap between two consecutive dashes when the border around x-axis label is rendered using dashed lines.
Range: In pixels
The dataset Object
Each dataset object contains a series of data. For example, for a monthly sales comparison chart for two successive years, the first data-set would contain the data for first year and the next one for the second year. You can provide data-set level cosmetics so that all data within that data-set will be plotted in the same color/alpha/etc. Depending on the chart type, there are a number of attributes that you can define for each dataset object.
This attribute defines what the particular dataset will be plotted as. Valid values are COLUMN, AREA or LINE.
Range: COLUMN, AREA or LINE
Lets you specify the series name for a particular dataset. For example, if you're plotting a chart to indicate monthly sales analysis for 2005 and 2006, the seriesName for the first dataset will be 2005 and that of the second will be 2006. The seriesName of a dataset is shown in legend.
Whether to show the border of this dataset (area or column only).
Range: 0/1
Color for data plot border of this dataset (area or column only)
Range: Hex Color Code
Thickness for data plot border of this dataset (area or column only)
Range: 0-5
Alpha for data plot border of this dataset (area or column only)
Range: 0 - 100
This attribute sets the color using which columns, lines, area of that dataset will be drawn
Range: Hex Color Code
This attribute sets the alpha (transparency) of the entire dataset.
Range: 0 - 100 or Comma Separated List
Whether to show the values for this dataset.
Range: 0/1
Specifies the font color of data values for a particular dataset.
Range: Hex Color Code
Sets the background color of value text for a particular dataset.
Range: Hex Color Code
Sets the border color around the value text for a particular dataset.
Range: Hex Color Code
This attribute lets you adjust the vertical alignment of data values for all dataplots in the dataset. The alignment is set with respect to the position of the dataplots on the chart. By default, the attribute is set to AUTO mode in which the alignment of each data value is determined automatically based on the position of each plot point. In ABOVE mode, data values are displayed above the plot points unless a plot point is too close to the upper edge of the canvas. While in BELOW mode, data values are displayed below the plot points unless a plot point is too close to the lower edge of the canvas. The attribute will function only if showValue attribute is set to 1 in this particular dataset.
Range: "ABOVE", "BELOW", "AUTO"
Whether this dataset will appear as dashed.
Range: 0/1
Whether to include the seriesName of this dataset in legend. In combination charts, this can be particularly useful when you've used the area/line chart to plot a trend but do not want the seriesName of that trend to appear in legend.
Range: 0/1
Whether to draw anchors for a particular dataset.
Range: 0/1
Sets the number of sides that the anchors of the particular dataset will have. For e.g., an anchor with 3 sides will represent a triangle, with 4 it will be a square and so on.
Range: 3-20
This attribute sets the starting angle for anchors of particular dataset.
Default value: 90
Range: 0 - 360
This attribute sets the radius (in pixels) of the anchors of the particular dataset.
Range: In Pixels
Lets you set the border color of anchors of the particular dataset.
Range: Hex Color Code
Helps you set border thickness of anchors of the particular dataset.
Range: In Pixels
Helps you set the background color of anchors of the particular dataset.
Range: Hex Color Code
Helps you set the alpha of entire anchors of the particular dataset. If you need to hide the anchors for the dataset but still enable tool tips, set this as 0.
Range: 0 - 100
Thickness of the lines for the particular dataset.
Range: In Pixels
Sets the length of each dash when lines for a data-set is rendered as dashed lines.
Range: In pixels
Sets the gap between consecutive dashes when lines for a data-set is rendered as dashed lines.
Range: In pixels
Sets whether a dataset will be visible on the chart, when the chart is first loaded. This attribute overrides the initiallyHidden attribute.
Default Value : 1
Range: 0/1
This attribute sets the number of sides for anchors of a particular dataset when hovered.
Range: In Pixels
This attribute sets the background color for anchors of a particular dataset when hovered.
Range: Hex color code
This attribute sets the transparency for anchor's background of a particular dataset when hovered.
Range: 0 - 100
Sets the border color for anchors of a particular dataset when hovered.
Range: Hex color code
Sets the border's transparency for anchors of a particular dataset when hovered.
Range: 0 - 100
This attribute sets the border thickness for anchors of a particular dataset when hovered.
Range: In pixels
This attribute sets the starting angle for anchors of a particular dataset when hovered.
Range: In pixels
This attribute adds a dip effect (different shapes) for anchors of a particular dataset on hover. When hovered a star shaped anchor is created. Using anchorSides attribute, you can specify the no. of sides for anchors.
Note : If the anchors are of circular shape, this attribute won't be applied on it.
Range: 0 - 1
The data Object
Attributes of the data object, child of the dataset object, are used to define the values to be plotted for individual data series.
The dataset and data objects defined for one data series are shown in the example below:
"dataset": [{
"seriesname": "Previous Year",
"data": [{
"value": "10000",
},
{
"value": "11500",
},
{
"value": "12500",
},
{
"value": "15000"
}]
}]
Numerical value for the data item. This value will be plotted on the chart.
If instead of the numerical value of this data, you wish to display a custom string value, you can specify the same here. Examples are annotation for a data item etc.
Range:
For combination charts, you can define the color of datasets at dataset level. However, if you wish to highlight a particular data element, you can specify its color at "set" level using this attribute.
Range: Hex Color Code
You can define links for individual data items. That enables the end user to click on data items (columns, lines, bars etc.) and drill down to other pages. To define the link for data items, use the link attribute. You can define links that open in same window, new window, pop-up window or frames. Please see "Drill-Down > Using JavaScript Functions as Links" for more information. Also, you'll need to Url Encode all the special characters (like ? and &) present in the link.
You can individually opt to show/hide values of individual data items using this attribute. This value over-rides the dataset level value.
Range: 0/1
Specifies the font color of a data value for an individual data plot.
Range: Hex Color Code
Sets the background color of a value text for an individual data plot.
Range: Hex Color Code
Sets the border color around the value text for an individual data plot.
Range: Hex Color Code
If you've opted to show a particular data value on the chart, this attribute lets you adjust the vertical alignment of individual data values with respect to dataplots. By default, this attribute is set to AUTO mode in which the alignment of a data value is determined automatically based on the position of its plot point. In ABOVE mode, a data value is displayed above the plot point unless a plot point is too close to the upper edge of the canvas while in BELOW mode, a data value is displayed below the plot point unless a plot point is too close to the lower edge of the canvas.
Range: "ABOVE", "BELOW", "AUTO"
Whether the border of this data item should appear as dashed. This is particularly useful when you want to highlight a data (such as forecast or trend etc.). This value over-rides the dataset level value.
Range: 0/1
For combination charts, you can define the alpha of datasets at dataset level. However, if you wish to highlight a particular data element, you can specify its alpha at "set" level using this attribute.
Range: 0 - 100
By default, FusionCharts XT shows the series name, category name, and value as tool tip text for that data item. But, if you want to display more information for the data item as tool tip, you can use this attribute to specify the same.
Lets you specify "set" specific sides of the anchor.
Range: 3-20
This attribute sets the starting angle for an anchor of a particular data.
Default value: 90
Range: 0 - 360
Lets you specify "set" specific radius (in pixels) of the anchor.
Range: In Pixels
Lets you specify "set" specific border color of the anchor.
Range: Hex Color Code
Lets you specify "set" specific border thickness of the anchor.
Range: In Pixels
Lets you specify "set" specific background color of the anchor.
Range: Hex Color Code
Lets you specify "set" specific alpha of the anchor.
Range: 0 - 100
Lets you specify "set" specific alpha of the anchor background.
Range: 0 - 100
Trend-lines
Trend-lines are horizontal lines that aid in interpretation of data with respect to some pre-determined value. For example, if you are plotting the sales data for the current year, you might want to show the previous year's average monthly sales as a trend indicator for ease of comparison. The lines object, child of the trendlines object is used to add trend-lines to a chart.
Although the line object has to be defined within the trendlines object, the latter cannot be used to collectively customize trend-lines, because it does not have any attributes of its own.
The attributes of the lines object, child of the trendlines object, are used to create and customize trend-lines for charts.
The starting value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the startValue will be 102.
Range: Numeric Value
The ending y-axis value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the endValue will be 109. If you do not specify a value for endValue, it will automatically assume the same value as startValue.
Range: Numeric Value
If you want to display a string caption for the trend line by its side, you can use this attribute. Example: displayValue='Last Month High'. When you don't supply this attribute, it automatically takes the value of startValue.
Color of the trend line and its associated text
Range: Hex Color Code
Whether the trend will be displayed as a line or a zone (fill-colored rectangle).
Range: 0/1
If you've opted to show the trend as a line, this attribute lets you define the thickness of trend line.
Range: In Pixels
Alpha of the trend line.
Range: 0 - 100
Whether the trendline should be rendered as dashed lines.
Default value: 0 (trendline rendered using straight lines)
Range: 0/1
Sets the width of each dash when trendline is rendered as dashed lines.
Range: In pixels
Sets the gap between consecutive dashes when trendline is rendered as dashed lines.
Range: In pixels
Whether to show the trendline value on left side or right side of chart. This is particularly useful when the trend line display values on the chart are colliding with divisional lines values on the chart.
Range: 0/1
Custom tool-text for this trendline/zone.
Range:
Trend-lines (Chart level attributes)
Trend-lines are horizontal lines that aid in interpretation of data with respect to some pre-determined value. For example, if you are plotting the sales data for the current year, you might want to show the previous year's average monthly sales as a trend indicator for ease of comparison. Cosmetics for all the trend-lines rendered can be attained using this set of attributes.
Although there are set of attributes of the line object, used to create and customize trend-lines, these set of attributes effect all the trend-lines rendered in your chart.
Sets color of all the trend lines and its associated text in the chart.
Range: Hex Color Code
If you've opted to show the trend as a line, this attribute lets you define the thickness of all the trend lines in your chart.
Range: In Pixels
Sets transparency for all the trend lines in your charts.
Range: 0 - 100
Sets the tooltip text of the trend-line. It accepts macros, plain text, and HTML tags, as string.
Trend-lines Display Value Cosmetics
These attributes let you customize the text displayed with a trend-line.
Note: These attributes belong to the chart object and not to the line object (child of the trendline object). They are, therefore, applied to all trend-lines on your chart.
Sets the font family for the trend-line display value.
Range: Font Name
Sets the font size for the trend-line display value.
Range:
Sets whether the trend-line display value will be bold formatted.
Default value: 0 (not bold formatted)
Range: 0/1
Sets whether the trend-line display value will be italicized.
Default value: 0 (not italicized)
Range: 0/1
Sets the background color for the trend-line display value.
Range: Hex Color Code
Sets the border color for the trend-line display value.
Range: Hex Color Code
Sets the transparency for the trend-line display value.
Default value: 100
Range: 0 - 100
Sets the transparency for the background of the trend-line display value.
Default value: 100
Range: 0 - 100
Sets the transparency for the border around the trend-line display value.
Default value: 100
Range: 0 - 100
Sets padding for the border around the trend-line display value.
Range: In pixels
Sets the radius for the border around the trend-line display value.
Range: In pixels
Sets the thickness for the border around the trend-line display value.
Range: In pixels
Whether the border around the trend-line display value should be rendered as dashed lines.
Default value: 0 (border rendered using straight lines)
Range: 0/1
Sets the length of each dash when the border around the trend-line display value is rendered as dashed lines.
Range: In pixels
Sets the gap between two consecutive dashes when the border around the trend-line display value is rendered as dashed lines.
Range: In pixels